version imprimable
Transcription
version imprimable
Supports Signalisation Lumineuse Tricolore Poteaux, Potelets, Potences Sapa Pole Products, concepteur et fabricant de mats en aluminium extrudé, renforce son implantation sur le marché français. Depuis Janvier 2012, nous avons établi avec un de nos partenaires français une unité de stockage avec livraison rapide et/ou possibilité d’enlèvement directement sur site. NOUVEAU Mats rétreints diam 145/90 - 2,70 M et 3,65 M en stock sur toute la France! La gamme de nos mats en SLT Pourquoi choisir un mat en aluminium? Le poids léger Un avantage indéniable en termes d’installation et de maintenance. Peu d’entretien En raison de la bonne résistance à la corrosion de l’aluminium, aucun traitement de surface n’est nécessaire. Respectueux de l‘environnement Nos mats aluminium sont fabriqués avec 95% d’aluminium recyclé et sont 100% recyclable. Mats labélisés ‘’Cradle to Cradle’’. Options •anodisation •thermo laquage selon nuancier RAL •perçages •tiges d’ancrages •semelle sabot (= semelle en 2 parties) •protection pied de mat •mats fusibles Conformité et réglementation: • EN12899 (potelets, poteaux) • Eurocode (potences, poteaux) • Guide du STRMTG- mats fusibles • NV65 Tous nos mats satisfont a la norme EN 40 et sont certifiés CE. Nos calculs de résistance sont réalisés par notre BE. En option, norme EN 12767, mat a sécurité passive. Mats feu rouge Mats passage piétons NOUVEAU Mats rétreints diam 145/90 - 2,70 M et 3,65 M en stock sur toute la France! Mats pour signalisation Mats fusibles Mats pour signalisation Potences Stock et livraison En partenariat avec une société en France, nous vous garantissons pour les petites quantités en poteaux et potelets rétreints standards diam 145/90, finition alu brossé, une livraison sous 8 jours. Pour les grandes quantités et tous les autres produits type potences, supports de panneaux de signalisation, mats fusibles, mats tubulaires… merci de nous consulter. Mats rétreints Ht en M Diam- section en mm Entraxe en mm Potelet et Potelet fusible 2,60 à 2,80 145/90 - 135/90 - 120/90 200 x 200 Poteau et Poteau fusible 3,60 à 3,70 145/90 - 135/90 - 120/90 200 x 200 Profil de renforcement Potences Ht en M Déport en M Section base en mm 6,00 3,00 226/165 135/76 300 x 300 6,00 3,50 226/165 135/76 300 x 300 6,00 4,00 226/165 135/76 300 x 300 Sections déport en mm Entraxe en mm Autres dimensions sur demande Porte avec 2 serrures 1148 - CPD – (20)090709 Sapa Pole Products in its factory of DRUNEN CE-Certificate: List of Approved Products Products Qualities and categories Dimensions Harmonised standard under reference: hEN 12899-1:2007 Supports for use with fixed vertical road traffic signs including signal heads according to EN 12368:2006 and variable message traffic signs according to EN 12966-1:2009 Material – Extruded aluminium stepped or conical circular tubes Grade – fy = 160 N/mm² (characteristic elastic limit) Dimensions expressed in nominal diameter and nominal wall thickness from 114 mm by 2.5 mm to 250 mm by 5.25 mm with Structural Performance declared by the Producer according to hEN12899-1:2007, §5 Durability: Resistance to corrosion – Aluminium; SP1 with or without Performance under vehicle impact (passive safety) for single post supports: 1. Products with nominal diameter / nominal wall thickness 250 mm / 4.0 mm, with nominal height of 15 m and all smaller members, but over 2 m, supplied with internal shear mechanism and founded using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 100,NE,3 (*) 2. Products with nominal diameter / nominal wall thickness 250 mm / 4.0 mm, with nominal height of 15 m and all smaller members, but over 2 m, supplied with internal shear mechanism and founded using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 70,NE,3 3. Products with nominal diameter / nominal wall thickness 165 mm / 3.3 mm, with nominal height of 10 m and all smaller members, but over 2 m using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 100,NE,2 (*) 4. Products with nominal diameter / nominal wall thickness 165 mm / 3.3 mm, with nominal height of 10 m and all smaller members, but over 2 m using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 70,NE,2 (*) also including multilegged supports with clear distances greater than 1 600 mm in class 100,NE,2 (according to EN 12767:2007, §4.3.7 and Annex F note C ; 1 600mm = 1 500/cos20°) ______________________________________________________________________________________________________ OCAB OCBS Boulevard de la Plaine Pleinlaan, 5 B-1050 BRUSSELS Phone : + 32 2 509 14 09 Fax : + 32 2 509 14 00 E-mail : [email protected] Website : www.ocab-ocbs.com ©2004 OCAB/OCBS 2/3 Sapa Pole Products Adresse postale P.O. Box 75 5150 AB Drunen Pays-Bas Adresse de visite Alcoalaan 12 5151 RW Drunen Pays-Bas Pour notre contact en France T +33(0)6 11 90 84 11 Téléphone+31 416 386 200 Fax +31 416 386 230 [email protected] Site Webwww.sapapoleproducts.com Semelle moulée Sapa Pole Products Rev. 1 FR SLT, Subject to product changes, misprints and printing errors Caractéristiques techniques mats rétreints References produits