factory grade - Canusa-CPS

Commentaires

Transcription

factory grade - Canusa-CPS
FACTORY GRADE
3LPP FIELD-APPLIED COATING SYSTEM
GTS-PP
FACTORY GRADE
GTS-PP
3LPP FIELD-APPLIED COATING SYSTEM
IntelliCOAT™
Launched in 2000, the GTS-PP 3LPP coating system remains the world’s leading
joint coating for 3LPP coated pipelines. Its patented design was the result of the
combined efforts of ShawCor and Canusa-CPS Research and Development teams.
The system utilizes the same raw materials used in leading 3LPP coatings industrywide, including those produced by our sister company Bredero Shaw. Our 3LPP
coating systems are yet another example of ShawCor’s ability to deliver complete
coating integrity along the entire length of the pipeline with equivalent, fully
compatible and fused factory and field-applied coating systems.
The world’s first automated system for
bringing factory grade performance and
quality to field joint coatings.
GTS-PP 3LPP field-applied coating technology
GTS-PP is comprised of the same materials as 3LPP factory-applied coatings and
offers equivalent performance:
•Polypropylene top coat delivers the hardness, mechanical protection and
resistance to moisture absorption critical for higher temperature, and often,
deepwater pipelines
•High temperature epoxy on the steel provides resistance to corrosion and
cathodic disbondment equivalent to that of 3LPP factory-applied coating while
offering relatively low installation temperatures compared with other systems
•PP copolymer adhesive bonds the polypropylene top coat to the epoxy
layer and fuses to the 3LPP factory-applied coating where the joint coating
overlaps to eliminate the possibility of moisture ingress
Efficient compatibility with factory-applied coating
GTS-PP fuses to the 3LPP factory-applied coating with relatively low installation
temperatures. The system can be installed directly by pipeline contractors in an
efficient and controlled manner using uniform induction heating technology,
a feature which, along with its superior performance, has contributed to its
unparalleled success.
In single-sleeve configuration, GTS-PP is available in up to 8 mm applied thickness
with engineered features to simplify installation and promote completely repeatable
fusion to the mainline coating overlap area. Other PP joint coating system
configurations are also available for a variety of pipeline requirements. Please
consult your Canusa-CPS representative with any specific requirements.
6 mm thick GTS-PP system with engineered features including reduced edge thickness for simplified
fusion to 3LPP and automatic welding for efficient offshore productivity
Proven track
record
Equivalent and fused to 3LPP factory-applied coating
Test/Property*
3LPP factory coating
GTS-PP 3LPP system
• #1 selected field joint coating for 3LPP pipelines globally, both onshore and offshore
Coating type
3LPP
3LPP
• 100% success rate to date on more than 12,000 km (1,000,000 joints) of pipelines
Ambient adhesion
≥ 250 N/cm
> 250 N/cm
• Used on the most highly engineered and demanding onshore and offshore
pipelines installed over the past decade
Adhesion @ OT
≥ 60 N/cm @ 110°C
> 60 N/cm @ 110°C
Compatibility with 3LPP
N/A
Fused
Impact resistance
≥ 10 J/mm
(pass holiday test)
> 10 J/mm
(pass holiday test)
Indentation resistance
≤ 0.1 mm @ 23°C
≤ 0.4 mm @ 110°C
< 0.1 mm @ 23°C
< 0.4 mm @ 110°C
• Proven in deepwater applications with successful subsea simulation testing
completed for 2,800 m water depth
• Pipeline diameters up to 48" O.D.
• Single-sleeve coating thickness up to 8 mm
• Applications include field joints, bends, tie-ins, spools
• Supplied with Canusa-CPS’ extensive range of advanced induction heating
equipment for excellent process control
Proven compatibility
and fusion
* Measured using DIN 30678 test methods for 3LPP coatings
Our GTS-PP technology is fully compatible
with Canusa-CPS’ patented IntelliCOAT™
system which automates the installation
of heat-shrinkable pre-extruded coating
systems, such as GTS-PP. When combined,
these technologies deliver consistent in-field
application and full repeatability with
improved safety and can offer significant
productivity and cycle time improvements.
Trusted around the world
ADCO
ADMA OPCO
AGIP KCO
BG
Bluestream
BP
Chevron
CNOOC
Cuu Long
Dolphin
GASCO
KOC
MEDGAZ
PDO
Petrobras
Petronas
Premier Oil
PTTEP
Santos
Shell
Sonatrach
Statoil
Talisman
TOTAL
Woodside
Head Office & Americas
Canusa-CPS
A division of ShawCor Inc.
25 Bethridge Rd.
Toronto, ON M9W 1M7, Canada
Tel: +1 416 743 7111
Fax: +1 416 743 5927
Canusa-CPS
A division of ShawCor Inc.
2408 Timberloch Place,
Building C-8
The Woodlands, TX 77380, USA
Tel: +1 281 367 8866
Fax: +1 281 367 4304
Europe & Middle East
Canusa Systems
A division of ShawCor UK Limited
Unit 3, Sterling Park
Gatwick Road
Crawley, West Sussex
RH10 9QT, England
Tel: +44 1293 541254
Fax: +44 1293 541777
Asia-Pacific
Canusa-CPS
A division of ShawCor Inc.
101 Thomson Road
#11-03 United Square
Singapore 307591, Singapore
Tel: +65 6749 8918
Fax: +65 6749 8919
For additional information, please contact:
[email protected]
www.canusa.com/GTS-PP
Canusa-CPS is registered to ISO 9001:2008
canusa.com

Documents pareils