FEROCLEAN N 600 – bactericide free industrial cleaner for multi
Transcription
FEROCLEAN N 600 – bactericide free industrial cleaner for multi
FEROCLEAN N 600 – bactericide free industrial cleaner for multi-metal usage, high pressure applicable, free from non-ionic surfactants Petrofer Chemie H.R. Fischer GmbH + Co. KG Dr. Florian Treptow, Ph.D., Dipl.- Ing. (FH) Chemie Roemerring 12-16 Germany, 31137 Hildesheim Phone +49 5121 7627 371 Process flow Mechanical production Cleaning Packaging/ Sending Metalworking/ Mounting Following the process an industrial cleaner should match as follows - be compatible have approvals have external approvals (e.g. robotics, polymers, sensors) match the actual laws achieve the presetting according to technical cleanliness Dr. F. Treptow Seite 2 Problem - Cleaning to be done in a shorter timing - Many times the mechanical cleaning is increased - Modern alloys have a lot of ingredients - Decreasing temperature could lead to the grow of biology Dr. F. Treptow Seite 3 Stand at the moment - Most times it is washed at 50 – 70 °C Industrial cleaners do not need bactericides at this temperature Decreasing the temperature bactericides start to grow resulting in smell The new biocide guideline complicate the use of bactericides With modern alloys decolorizing and spotting is seen very often Very often the washing chemistry is not matched for multi-metal usage Dr. F. Treptow Seite 4 FEROCLEAN N 600 - - The actual product generation matches this requirements The „PETROFER NITROGEN TECHNOLOGIE“ offers bactericide free washing at every temperature The product is free from non-ionic surfactants, therefore foam free at every temperature Approvals of known pump producers and the robotics industry are worked out and available Dr. F. Treptow Seite 5 FEROCLEAN N 600 PETROFER NITROGEN TECHNOLOGIE • • • • • • • • • • • • • State of the art, special designed molecules All REACH registered Worldwide available Pure amine based Multi-metal usable Nonionic surfactant free No cloud point Salt-free Foam-free Bactericide-free Si-free Free of Formaldehyde releasers Boron-free Dr. F. Treptow Seite 6 FEROCLEAN N 600 The cleaner is tested at 70 °C for 8 hours, circulating and spraying Result: • No foam • Very good pressure stability • Best possible cleaning result Dr. F. Treptow Seite 7 FEROCLEAN N 600 Product pHvalue 2% use Temp. [°C] Corr. Prot. FEROCLEAN N 600 modern, surfactant free cleaner, newest generation 9,6 5 - 90 very good Material steel, stainless steel, cast iron, aluminum, yellow metals Concentration [%] Application 0,5 – 3 - high corrosion protection already from low concentrations on - very good demulsifying properties - almost foam free - bactericide free, long time stable - without formaldehyde releasers - boron free - high pressure up to 2500 bar Dr. F. Treptow Seite 8 FEROCLEAN N 600 Approvals Hammelmann Pumps for all gasket types ABB Robotics Corpac Deutschland GmbH SensAction AG EXCOR VCI Products Dr. F. Treptow Seite 9 Thank you for your attention You will find us in hall 5, booth C 45 Your contact person would be Mr. Reich et al. Petrofer Chemie H.R. Fischer GmbH + Co. KG Dr. Florian Treptow, Ph.D., Dipl.- Ing. (FH) Chemie Roemerring 12-16 Germany, 31137 Hildesheim Phone +49 5121 7627 371