Frédéric THIEBAUD Associate Professor – Professeur

Frédéric THIEBAUD
Associate Professor – Professeur Agrégé de Mécanique
Email: [email protected]
Research
LEMTA (site ESSTIN) - Université de Lorraine – CNRS - UMR 7563
2 rue Jean Lamour, 54500 Vandoeuvre les Nancys
- Current Research Interests
Study of the electromechanical behavior of nonlinear ferroelectric ceramics:
phenomenological and micromechanical modeling, numerical and experimental
characterization of ferroelectric structures, development of special finite element
with coupled electromechanical degrees of freedom.
Design and optimization of structures based Shape Memory Alloy (Stent, endodontic
files, passive dampers, etc..). Development of experimental techniques and digital
drivers.
Teaching
Ecole Supérieure des Sciences et des Techniques de l’Ingénieur de Nancy (ESSTIN)
2 rue Jean Lamour, 54500 Vandoeuvre les Nancys
- Main teaching topics (level, institution)
Mechanics of solids (Associate degree)
Mechanical Engineering (Masters degree)
Mechanics of material (Masters degree)
Material Forming (Masters degree)
Career
- Ecole Normale Supérieure de Cachan (2000 - 2004)
- PhD Thesis : Université de Franche-Comté (2004-2007)
- Associate Professor : Université de Lorraine (2009, …)
- Adviser of the Mechanical , Energy and Material center at ESSTIN
International cooperation
- Karlsruhe Institute of Technology (Ferroelectric ceramics)
- University of Michigan (Ferroelectric and SMAs harvesters)
Recent archival journal publications
2011
• F.Thiébaud
"Determination of an Innovative Consistent Law for the Rheological Behavior
of Polymer/Carbon Nanotubes Composites."
Soft Nanosciences Letters, 2011, 1(1), 1-5 DOI : 10.4236/snl.2011.11001
2010
• F.Thiébaud, J.C. Gelin
" Characterization of rheological behaviors of polypropylene/carbon
nanotubes composites and modeling their flow in a twin-screw mixer."
Composites Science and Technology, 2010, 10(4), 647-656 DOI :
10.1016/j.compscitech.2009.12.020
2008
• C.Lexcellent, F.Thiébaud
"Determination of the phase transformation zone at a crack tip in a shape
memory alloy exhibiting asymmetry between tension and compression."
Scripta
Materialia,
2008,
59(3),
321-323
DOI
:
10.1016/j.scriptamat.2008.03.040
2007
• F.Thiébaud, M. Collet, E. Foltête, C.Lexcellent
"Implementation of a multi-axial pseudoelastic model to predict the
dynamic behavior of shape memory alloys."
Smart Materials and Structures, 2007, 16 (4), 935-947 DOI : 10.1088/09641726/16/4/001
2007
• F.Thiébaud, C.Lexcellent, M. Collet, E. Foltête
"Implementation of a model taking into account the asymmetry between
tension and compression, the temperature effects in a finite element code
for shape memory alloys structures calculations."
Computational Materials Science,
10.1016/j.commatsci.2007.04.006
2007,
41(2),
208-221
DOI
: