Balsan - Fabricant de moquette en lé et en dalle

Short summary of test report CRET n° RL 2010/217
Date
Name of quality
Type of Manufacture
Primary backing
Colouring
23/09/2010
LES BEST DESIGN II
M6 : tufted
P7 : man-made fibre fleece
C2 : Printed
Material received
31/08/2010
BALSAN
Manufacturer/applicant
Type of surface
Secondary backing
A1 : cut pile
S8: woven textile backing
Dimensions
Yarn type
wall to wall
Pile fibre composition
F1 : 100% polyamide
BCF
Total thickness (mm)
8,5
Surface pile thickness (mm)
5,8
Total carpet weight (g/m2)
2143
Surface pile weight (g/m2)
887
Surface pile density (g/cm3)
0,153
Number of tufts (m2)
188 100
Fibre bind
--
Weight loss Lisson (%)
4,12
Drum test Vettermann : short term
4,5
Drum test Vettermann : long term
3,5
Performance in appearance
retention
33
Wear performance (Itr)
33
Test done on underlay
no
Wear performance (Wear index)
Overall use class
33
Luxury class
LC4
Additional characteristics if applicable
Castor chair suitability
Resistant to fraying
A : intensive use
Pass
Stair suitability
A : intensive use
Thermal resistance
--
Insulation from impact noise ΔLw
--
Acoustical absortion W
--
Body voltage walking test
--
Suitable for underfloor heating
--
Vertical resistance
--
Horizontal resistance
--
Incidental humid conditions suitability
--
--
The manufacture ensures that the quality complies with the requirements for colour fatness and linear density.
The use properties mentioned in this summary are valid for the sample tested. It is the responsibility of the producer to guarantee
that the production tolerances on the identification parameter are within the values stated in EN 1307.
For the SARL C.R.E.T
Head of Test
The Technical Director
David VANDIERDONCK
Marc WELCOMME