Operations Manual/User Guide

Series 100
Model 165 (Edco CATV-145A)
Coaxial Cable TV Protection
Surge Protective Device
Technical Documentation
The ASCO Model 165 application is
specifically designed for lightning
protection on Coax Cable TV
Systems. The protector is easily
installed with standard type “F”
coax connectors. A ground wire
must be attached to the unit. The
Model 165 offers low loss even at
frequencies approaching 750 Mhz.
This is important for error-free data
communications.
Insertion Loss
Characteristic Impedance
Connectors
0 to 1000 MHz
<1.0 db 0 to 500 MHz Typ.
<2.0 db 500 to 750 MHz Typ.
75 Ohms
Female F-Type
Firing Voltage
180 V
Surge Current
5000 Amps (10k V/μS)
Response Time
GDT Life
Dimensions (in / mm)
Weight (oz / kg)
Certification
Warranty
Former Model Name
165D180S05KGCXN0
Edco CATV-145A
• Connection: F-Connector
*See Ordering Information for model number selection
Features
• Low insertion loss
• Shielded case
• Easily installed
• Mounting plate
• 5 year warranty
<100nS (10k V/μS)
>600 Times @ 500 Amp pulse
1.25˝ H x 1.5˝ W x 4.5˝ L
[31.75 x 38.1 x 114.3 mm]
4 oz [0.11 kg]
UL 497B
5 years
Ordering Information
MODEL
• Voltage: 0-145 A
• Automatic recovery
General Technical Specifications
Frequency Range
Key Specs
V DANGER!
Only qualified personnel should install or service
this system. Electrical safety pre-cautions must
be followed when installing or servicing this
equipment. To prevent risk of electrical shock,
turn off and lock out all power sources to the
unit before making electrical connections or
servicing.
APPLICATION
Coax Cable TV Systems
Seulement le personnel qualifié doit installer
ou maintenir ce systéme. Des précautions de
sécurité en électricité doivent être suivis lors
de l’installation ou de la maintenance de cet
equipement. Pour eviter tout risque de choc
électrique, débranchez et verouiller toutes
les sources d’alimentation de cet equipement
avant de.
14550 58th Street North
Clearwater, Florida 33760
P (800) 237-4567
P (727) 535-6339
F (727) 539-8955
E [email protected]
While every precaution has been taken to ensure accuracy and completeness herein, ASCO Power Technologies assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for
any errors or omissions. Specifications are subject to change without notice.
ID-50148 Rev- 07-16