PUSH-IN TANK VALVE Fluid control for industrial applications

Innovation Inside.
PUSH-IN TANK VALVE
Fluid control for industrial applications
The Push-In Valve is designed to ensure the tank’s filling of fluid or gas safely.
This unique design allows a quick and easy mounting on tanks.
PU-181-GB-1/SP 2012-09/ipns
Document non contractuel/Schrader se réserve le droit d’apporter toutes modifications à cette documentation ou aux produits eux-mêmes et ceci sans préavis
Uncontracted document/The management of Schrader reserves the right to modify this leaflet and/or the products described therein without notice
The robustness of the
rubber
overmoulded
brass stem has been
tested thanks to the
long
know-how
of
SCHRADER in tyre valve
manufacturing
using
this technology.
Bill of material:
The Push-in valve consists of:
• A rubber overmoulded brass stem
• A Schrader valve core
• A cap with a rubber seal
SCHRADER’s
process
ensures the zero defect
and the air-tightness is
100 % controlled.
Design of valve hole:
• Diam. 10 mm
• Tank’s thickness from 0.8 to 2 mm
• Chamfer 0.3 mm (inner & outter)
Using conditions:
• Operating temperature range:
-10 to 100°C
• Operating pressure range:
0-16 bar (0-14 bar when core opened)
• Flow: 6 m3/hour
• Compatible with air and nitrogen
Schrader S.A.S - 48 rue de Salins - BP 29
F 25301 Pontarlier Cedex - France
Tél. : +33 (0)3 81 38 56 56 - Fax : + 33 (0)3 81 38 56 29
E-mail : [email protected]
www.SchraderInternational.com