Netkit Device
Transcription
Netkit Device
NETKIT-IR & NETKIT-RS NETKIT DEVICES Style & Quality People nowadays have more and more different devices like laptops, smartphones, notebooks, iPads… which should make our life easier, but the different technologies combined together can make our life also more complex. The APart Netkit devices are the perfect solution! The APart Netkit product family is designed to quickly connect almost any electrical device to a network and comes with a choice of wired TCP/IP connectivity to infrared (IR) or serial (RS232) equipment. The IR units include 3 configurable in/outs and all units (IR and RS) include built-in IR learning. An embedded web server allows easy configuration from any web browser. Now it is possible to design and integrate a low-cost custom system for APart products and other devices with serial or infrared control possibilities. The NETKIT IR/RS allow easy integration with PC, Mac, iPhone/iPod/iPad and Android devices via freely available software applications. You can use third party software to operate the Netkits via home control units, tablets or smartphones. Now you can seamlessly connect a pc or laptop and control serial (RS) or infrared (IR) devices over a LAN-network and the internet. The new APart NETKIT products provide a new level of automation and control flexibility, enabling device networking in your home, hotels, restaurants, meeting rooms and many other applications. TECHNICAL SPECIFICATIONS o o o o o o o Ethernet Network connection via RJ45 connector, 100/10 Mbits Ethernet protocol, adhering to TCP, DHCP and HTTP standards Integrated web server for easy configuration (through TCP/IP set-up commands) Downloadable iHelp and iLearn software Power Input: 5 to 16V DC@300mA (wall power adapter included) Aluminum extrusion housing, rubber end caps and plastic face plates Dimensions (L x W x H): 8.25 x 5.72 x 3.18 cm Weight: 92 g (170 g with power supply) Serial/RS232 interface o o o o Male DB9 Connector 1200 baud to 115.000 baud data rates supported Odd, Even, and None parity settings Bi-directional with hardware RTS/CTS flow control WWW.APART-AUDIO.COM [email protected] NETKIT-IR & NETKIT-RS NETKIT DEVICES IR and Sensor Interface o o o 3 Independent selectable IR outputs or sensor inputs using 3.5 mm stereo jacks 3 IR emitters included 1 IR receiver for IR-learning included (supported on 3rd IR port) WWW.APART-AUDIO.COM [email protected]