SER-RJ45 Serial RS232 Cable

SER-RJ45 Serial RS232 Cable
Pre-terminated Configuration Cable for Simple Commissioning
Specifications
Termination
Host
DB-9 - Female
Module
RJ45 - Male
Length
1.1m (3.6’)
General
Note: Specifications subject to change.
Ordering
To order, select product code from the table and specify country of application.
Description
The SER-RJ45 Serial Cable is a 1.1m (3.6’) DB-9 female to RJ45 male preterminated straight through cable. It is suitable for various ELPRO products and
is used for connecting between ELPRO products and peripheral equipment.
Product Code
Description
SER-RJ45
Serial RS232 Cable - DB9 Female to RJ45 Male Straight Through
Product Compatibility
Please refer to product datasheets for compatibility details to suit your application.
The SER-RJ45 cable enables configuration, diagnostics and exchange of
serial data to a DTE device.
Note: Configure other ELPRO products using SER-DB9 (Data Sheet #7955).
The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product
data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper
Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
©2013 Cooper Bussmann
www.cooperbussmann.com/wireless
0513
BU-SB13099
Page 1 of 1
Datasheet: 7956