Aquacer 513 Wax emulsion to increase the surface properties of
Transcription
Aquacer 513 Wax emulsion to increase the surface properties of
Aquacer 513 Wax emulsion to increase the surface properties of aqueous paint systems Composition Aquacer 513 Non-ionic aqueous emulsion based on an oxidised polyethylene wax (HDPE) Typical Physical Data Aquacer 513 Non-volatile matter DIN 53216 A (1h, 125°C) Melting-point Viscosity pH - value DIN 53019 DIN 19268 in % in °C in mPa·s 35,0 (± 1,0) 130 60 (± 30) 9, 5 (± 0,5) Appearance Colour liquid yellow Values indicated in this data sheet describe typical properties and do not constitute specification limits. Recommended Amounts % additive (delivery form) based upon: Total formulation Aquacer 513 1–6 In waterborne systems 3 – 14 In printing inks Incorporation Methods and Processing Instructions Aquacer 513 should preferably be added at an early stage to secure appropriate distribution. If post added, sufficient dispersing energy should be applied. Aquacer 513 should be stirred before used. Application Fields Aquacer 513 is suitable for use in non ionic and anionic waterborne systems and printing inks. Data Sheet S 47 Special Properties and Advantages Aquacer 513 improves the following properties: ∑ black heel marking resistance ∑ scratch resistance ∑ rub resistance ∑ anti blocking Storage and Transport To be stored and transported at a temperature between 5ºC and 35ºC. Packaging not to be exposed to direct heat radiation. Further Information For further information on our paint additives please see our brochure: ! Product guide wax additives G 2 This information is given to the best of our knowledge. Because of the multitude of formulations, production and application conditions, all the above mentioned statements have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. 02/00 This data sheet replaces all previous issues - Printed in Germany BYK-Cera bv, P.O. Box 535, NL-7400 AM Deventer, The Netherlands Tel. *31/570/678/200, Fax *31/570/678/250, e-mail: [email protected], Internet: www.byk-cera.nl