TS 971 Automatic control panel DES / NES
Transcription
TS 971 Automatic control panel DES / NES
TS 971 Automatic control panel DES / NES TS 971 Approvals and certificates Control panel TS 971 Compatible limit switches DES / NES Dimensiones (WxHxD) mm 155 x 380 x 80 Power supply VAC 1~ 190-230 3~ 190-400 Operating frequency Hz 50 / 60 Max output power kW 3,0 External supply voltage DC VDC A 24 0,35 External supply voltage AC VAC A 230 1,6 Control inputs VDC mA 24 10 typ. Controller power input VA 10 Operating temperature °C -5 / +40 Air humidity % 90 (noncondensing) Protection class IP 65 (54) VAC A 2 changeover, potential-free 230 1,0 TS 971 Type test according to: DIN EN 12453 DIN EN 12978 DIN EN 60335-1 Relay contacts DIN EN 60335-2-103 DIN EN ISO 13849-1 TÜV NORD CERT GmbH N E S Connectable accessories 24 V External D E S With intergrated U Universal B Command sensor S System 230 V 1~ 190-230V 3~ 190-400V External GfA-Gesellschaft für Antriebstechnik Dr.-Ing. Hammann GmbH & Co.KG Wiesenstraße 81 40549 Düsseldorf / Germany +49 (0) 211-500 900 +49 (0) 211-500 90 90 [email protected] www.gfa-elektromaten.de Subject to alterations. (02.2012_Aa) NEW features Universal power supply (190 - 440VAC ~, 350mA) Safe reversing contactor (with second independent disconnection facility) Two relay contacts (independently programmable) Integrated radio receiver (433 MHz) Integrated radio transmission system, Wireless safety device (WSD) Two UBS inputs DES and NES processing (compatible with TS 961 and TS 970) Plugin power feed (optional main-switch assembly kit) Connecting cable installed from above or below Keypad illumination NEW software features Rotation direction change via keypad Dead man mode with active sensitive edge Separately adjustable switch positions for relay contacts Max number of safety edge actuations for auto time closure adjustable Various command devices for partial opening Accessories 2 1 Identical enhanced functions for both relays: • Green light • Light switch function • Cam switch contact • Ramp enable • Test output for external safety device Flexible setting for force monitoring in upwards direction (for fully balanced doors) Configurable sensitive edge reversing time Choice of different radio transmitters (various manufacturers) Finer differentiation of status messages Display of last 6 status messages The operating sequences and the controller configuration can be read out with a service software for simplified analyses and troubleshooting (readout adapter and software available separately). All other familiar TS 970 functions and the menu structure have been adopted unchanged. 1 2 3 4 3 1 Emergency stop 2 Key switch 3 Toggle switch for intermediate stop setting 4 Main switch 4 Terminal assignment GfA-Gesellschaft für Antriebstechnik Dr.-Ing. Hammann GmbH & Co.KG Wiesenstraße 81 40549 Düsseldorf / Germany +49 (0) 211-500 900 +49 (0) 211-500 90 90 Pos. Description Pos. Description DES / NES DES or NES limit switch connector X1 Power supply F1 1.5 A fine wire slow blow fuse X2 Safety edge and safety switch for door MOT Motor connector X3 E-STOP command device S Selector switch X4 Auto time closure ON / OFF S11 OPEN button X5 External push buttons S12 STOP button X6 One way or reflection photocell S13 CLOSE button X7 Radio receiver / Ceiling pull switch T Radio receiver aerial X8 Partial opening ON / OFF UBS Universal bus sensor (UCS) connector X20 Potential free relay contact 1 V1 Display X21 Potential free relay contact 2 X 24 V supply to external devices [email protected] www.gfa-elektromaten.de Subject to alterations. (02.2012_Aa)