material safety data sheet - State Industrial Products

Transcription

material safety data sheet - State Industrial Products
MATERIAL SAFETY DATA SHEET
State Chemical Division – State Industrial Products
5915 Landerbrook Drive, Suite 300
Mayfield Hts., Ohio 44124-4034
440-565-5555 / 866-747-2229
State Chemical Ltd.
1745 Meyerside Dr., Unit #1, Mississauga, Ontario L5T 1C6 (905) 670-4669
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name:
Product Description:
BT-85 P
24 Hour Emergency CHEMTREC Number:
MSDS Number:
A powdered water treatment product.
800-424-9300
104693
2. COMPOSITION/INFORMATION ON INGREDIENTS
This product contains no ingredients at greater than 1% as defined hazardous by Federal and State Worker Right-To-Know laws.
3. HAZARDS IDENTIFICATION
***EMERGENCY OVERVIEW***
May be harmful if swallowed. May cause eye, skin and respiratory irritation.
POTENTIAL HEALTH EFFECTS
Eye Contact:
Skin Contact:
Inhalation:
Ingestion:
May cause eye irritation.
May cause skin irritation. Avoid prolonged skin contact.
May cause respiratory irritation.
May be harmful if swallowed.
4. FIRST AID MEASURES
Eye Contact:
Skin Contact:
Inhalation:
Ingestion:
Promptly flush with a large amount of water for at least 15 minutes. If irritation persists, consult a physician.
Promptly wash with soap and water and rinse thoroughly. Remove contaminated clothing and launder before reuse. If irritation persists, consult a physician.
Remove to fresh air. Restore breathing if necessary. If irritation persists, consult a physician.
Give large quantities of water or milk. Induce vomiting by touching finger to back of throat. Never give anything to an unconscious person. Contact a physician immediately.
5. FIRE FIGHTING MEASURES
Flashpoint:
Lower Explosive Limit(LEL):
Autoignition Temperature:
Flammable Properties:
Extinguishing Media:
Fire Fighting Instructions:
None.
NA
Upper Explosive Limit(UEL): NA
NA
None expected.
Use extinguishing media appropriate for surrounding fire.
Wear a self-contained breathing apparatus with full protective clothing. Use water spray to keep containers cool and to knock down fumes.
6. ACCIDENTAL RELEASE MEASURES
Ventilate area. Collect excess and transfer to proper container. Flush residue with plenty of water. Dispose of in accordance with Federal, State and Local Regulations regarding waste
disposal.
7.
HANDLING AND STORAGE
This product is for industrial use only. Use with adequate ventilation. Wash thoroughly after handling. Do not take internally. Do not wear contact lenses when handling this product. Empty
product containers may contain product residue. Avoid contact with skin, eyes and clothing. Do not mix with other chemicals. Keep out of reach of children. Keep containers closed when not
in use. Store in a well-ventilated, cool, dry area.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls:
Personal Protective Equipment:
Respiratory:
Eye:
Skin:
Other:
Provide sufficient mechanical ventilation to maintain exposure below TLV limit.
Typically not required.
Wear safety glasses or goggles with unperforated sideshields.
Wear chemically impervious gloves.
An emergency eyewash station or source of clean potable water should be available in case of accidental eye contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Physical State:
Boiling Point:
Solubility in Water:
Dark brown.
Powder.
NA
Complete.
Odor:
pH:
Freezing/Melting Point:
Specific Gravity:
None.
(0.1% solution) 10.0
NA
NA
10. STABILITY AND REACTIVITY
Stability:
Hazardous Polymerization:
Conditions to Avoid:
Incompatibility:
Hazardous Decomposition Products:
Stable.
Will not occur.
High temperatures. Do not mix with any other chemicals.
Strong oxidizers.
Sulfur Dioxide gas, Sodium Sulfide residue.
11. TOXICOLOGICAL INFORMATION
IARC / NTP / OSHA: This product contains no ingredients at 0.1% or greater that is listed as a human carcinogen.
12. ECOLOGICAL INFORMATION
NA
13. DISPOSAL CONSIDERATIONS
Do not reuse empty containers. Dispose of in accordance with the Federal, State, and Local regulations regarding pollution and waste disposal.
14. TRANSPORT INFORMATION
DOT Shipping Data:
Canadian TDG:
Not Regulated.
Not Regulated.
15. REGULATORY INFORMATION
TSCA:
CEPA:
All ingredients in this product are listed or exempt from listing on the TSCA Chemical Inventory.
All ingredients in this product are listed or exempt from listing on the Canadian DSL/NDSL.
HMIS RATING:
HEALTH = 2
WHMIS RATING:
Class D, Division 2B
FLAMMABILITY = 0
REACTIVITY = 0
PPE = B
16. OTHER INFORMATION
NA = Not Available or Not Applicable
Read and follow all label directions and precautions before using the product. This product is intended for industrial and institutional use only. NOT FOR HOUSEHOLD USE OR
RESALE. KEEP OUT OF THE REACH OF CHILDREN. While we believe that the data contained herein is factual and the opinions expressed are those of qualified experts, the
data are not to be taken as a warranty or representation for which the company assumes legal responsibility. They are offered solely for your consideration, investigation, and
verification. Any use of these data and information must be determined by the user to be in accordance with applicable Federal, State, and Local Laws and regulations.
HEALTH AND SAFETY INFORMATION: (216) 861-7114
Prepared On: January 2013
Replaces: January 2010
Completed By: Regulatory Affairs
FICHE SIGNALÉTIQUE
State Chemical Division – State Industrial Products
State Chemical Ltd.
5915 Landerbrook Drive, Suite 300
1745 Meyerside Dr., Unit #1, Mississauga, Ontario L5T 1C6 (905) 670-4669
Mayfield Hts., Ohio 44124-4034
440-565-5555 / 866-747-2229
1. IDENTIFICATION DU PRODUIT CHIMIQUE ET DE LA SOCIÉTÉ
Nom du produit :
BT-85/P
Description du produit : produit de traitement de l'eau en poudre
Numéro d’urgence CHEMTREC 24 h/24 :
Numéro de fiche signalétique :
800-424-9300
104693
2. COMPOSITION/INFORMATION SUR LES INGRÉDIENTS
Ce produit ne contient aucun ingrédient à plus de 1% défini comme étant dangereux par les lois fédérales et provinciales de droit d'accès des travailleurs à l'information.
3. IDENTIFICATION DES DANGERS
***SITUATIONS D’URGENCE***
Peut être nocif en cas d'ingestion. Peut irriter les yeux, la peau et les voies respiratoires.
EFFETS POSSIBLES SUR LA SANTÉ
Contact oculaire :
Contact cutané :
Inhalation :
Ingestion :
Peut causer une irritation de l'œil.
Peut causer une irritation de la peau. Éviter les contacts prolongés avec la peau.
Peut causer une irritation des voies respiratoires.
Peut être nocif en cas d'ingestion.
4. PREMIERS SOINS
Contact oculaire :
Contact cutané :
Inhalation :
Ingestion :
Rincer rapidement à grande eau pendant 15 minutes au minimum. Si l'irritation persiste, consulter un médecin.
Laver rapidement la peau à l’eau et au savon et rincer avec soin. Enlever les vêtements contaminés et les laver avant réutilisation. Si l'irritation persiste, consulter un
médecin.
Faire sortir la victime à l’air frais. Le cas échéant, rétablir la respiration. Si l'irritation persiste, consulter un médecin.
Faire boire de grandes quantités d'eau ou de lait. Provoquer le vomissement en plaçant le doigt au fond de la gorge. Ne jamais rien administrer à une personne
inconsciente. Contacter un médecin immédiatement.
5. EN CAS D’INCENDIE
Point d'éclair :
Limite d’explosivité inférieure (LEL) :
Température d’auto-inflammation :
Propriétés d’inflammabilité :
Moyens d’extinction :
Lutte contre l’incendie :
néant
néant
Limite d’explosivité supérieure (UEL) : néant
néant
aucune présumée
utiliser des moyens d'extinction adéquats pour le feu environnant.
porter un appareil respiratoire autonome et une tenue protectrice intégrale. Pulvériser de l'eau pour garder les récipients frais et pour abattre la fumée.
6. ÉMISSIONS ACCIDENTELLES
Ventiler la zone. Récupérer et transférer dans un récipient approprié. Rincer les résidus à grande eau. Éliminer conformément aux réglementations fédérale, provinciale et locale en vigueur en
matière d'élimination des déchets.
8.
MANUTENTION ET ENTREPOSAGE
Ce produit est destiné à un usage industriel uniquement. Utiliser avec une ventilation appropriée. Se laver avec soin après manipulation. Ne pas ingérer. Ne pas porter de lentilles de contact
pour manipuler ce produit. Les récipients vides peuvent conserver des résidus de produit. Éviter tout contact avec la peau , les yeux et les vêtements. Ne pas mélanger avec d'autres produits
chimiques. Garder hors de portée des enfants. Garder les récipients fermés lorsqu'ils ne sont pas utilisés. Entreposer dans un endroit frais, sec et bien ventilé.
8. CONTRÔLE DE L’EXPOSITION / PROTECTION PERSONNELLE
Moyens techniques :
Prévoir une ventilation mécanique suffisante pour maintenir l'exposition en dessous des limites admissibles.
Équipement de protection individuelle :
respiratoire :
Généralement non requis.
oculaire :
Porter des lunettes de sécurité à écrans latéraux non perforés.
cutanée :
Porter des gants imperméables aux produits chimiques.
Autre :
Une station d'eyewash de secours ou une source de l'eau potable propre devrait être disponible en cas de contact d'oeil accidentel.
9. PROPRIÉTÉS PHYSIQUES ET CHIMIQUES
Aspect :
État physique :
Point d’ébullition :
Solubilité dans l’eau :
brun foncé
poudre
néant
totale
Odeur :
pH :
Point de congélation/fusion :
Densité :
néant
(solution à 0,1%) 10,0
néant
néant
10. STABILITÉ ET RÉACTIVITÉ
Stabilité :
Polymérisation dangereuse :
Conditions à éviter :
Incompatibilité :
Produits de décomposition dangereux :
stable.
ne se produit pas.
températures élevées Ne mélanger avec aucun autre produit chimique.
oxydants forts.
dioxyde de soufre gazeux, résidu de sulfure de sodium.
11. INFORMATIONS TOXICOLOGIQUES
CIRC / NTP / OSHA : Ce produit ne contient aucun ingrédient déclaré cancérogène humain à des teneurs supérieures ou égales à 0,1%.
12. INFORMATIONS ÉCOLOGIQUES
néant
13. ÉLIMINATION
Ne pas réutiliser les récipients vides. Éliminer conformément aux réglementations fédérale, provinciale et locale en matière d’environnement et d'élimination des déchets.
14. TRANSPORT
Données D.O.T. :
TMD (Canada) :
non réglé
non réglé
15. INFORMATIONS RÉGLEMENTAIRES
TSCA :
LCPE (Canada) :
Tous les ingrédients de ce produit figurent ou sont dispensés de figurer sur l’inventaire du TSCA.
Tous les ingrédients de ce produit figurent ou sont dispensés de figurer sur les LIS/LES (Canada).
CLASSIFICATION HMIS :
SANTÉ = 2
CLASSIFICATION SIMDUT :
Classe D, Division 2B
INFLAMMABILITÉ = 0
RÉACTIVITÉ = 0
PROTECTION INDIVIDUELLE = B
16. AUTRES INFORMATIONS
néant = non disponible ou sans objet
Lire et suivre toutes les instructions et les précautions d’emploi figurant sur l’étiquette avant d’utiliser le produit. Ce produit est destiné à l’industrie et aux collectivités
uniquement. IL N'EST PAS DESTINÉ À UN USAGE DOMESTIQUE OU À LA REVENTE. GARDER HORS DE PORTÉE DES ENFANTS. Bien que les informations ci-dessus
soient jugées exactes et que les avis exprimés soient ceux d’experts qualifiés, les données fournies ne tiennent pas lieu de garantie ou de déclaration engageant la responsabilité
juridique de la société. Ces informations sont fournies à des fins d’examen, de recherche et de vérification. L’utilisation de ces informations sera déterminée par l’utilisateur,
conformément aux lois et réglementations nationales, provinciales et locales en vigueur.
INFORMATIONS SUR LA SANTÉ ET LA SÉCURITÉ : (216) 861-7114
Date de Préparation : Janvier 2013
Remplace : Janvier 2010
Par : Affaires réglementaires