Automotive Fuse-links and Holders
Transcription
Automotive Fuse-links and Holders
BF1-Sicherungseinsätze BF1-fuse-links BF1-Cartouches fusibles für Nennspannungen bis 32 V for rated voltages up to 32 V pour tension nominale jusqu'à 32 V Gehäuse: aus Thermoplast (UL 94-VO), Schmelzleiter sichtbar, wärmeformbeständig Housing: out of thermoplast (UL 94-VO), visible melting element, heat resistant corps: de thermoplastique (UL 94-VO), filament visible résistant à la chaleur Anschlüsse: E-Cu, verzinnt 2 x Bolzen M5, Abstand 30 mm, 2 x Bolzen M6 Anzugsmoment 4,5 Nm ± 1 Nm Connections: E-Cu, tinned 2 x bolt M5, pitch 30 mm, 2 x bolt M6 starting torque 4,5 Nm ± 1 Nm Connexions: E-Cu, étamé vis 2 x M5, entraxe 30 mm , vis 2 x M6 couple initial de démarrage 4,5 Nm ± 1 Nm Industrieverpackung: 1000 Stück Industry-packaging: 1000 pieces Emballage-industriel: 1000 piéces Maße in mm / Dimensions in mm / Dimensions en mm ISO 8820 Part 5 UL 248 Special Purpose Fuses Bestell-Nr. Bestellnr. Order-No. Order-No. Order-No. Order-No. Kaltwiderstand Nennstrom Nennspannung Nennspannung Kaltwiderstand Kennfarbe Coldresistance Rated current Rated Rated voltageColdresistance voltage Colour-code Intensité nom. Tension Tension nom. Res. àRes. nom. froidà froid Code couleur I NI/IN rat 153.5631.530_ 153.5631.540_ 153.5631.550_ 153.5631.560_ 153.5631.570_ 153.5631.580_ 153.5631.610_ 153.5631.612_ 153.5631.615_ 153.7000.620_ 30 A 40 A 50 A 60 A 70 A 80 A 100 A 125 A 150 A 200 A UN /UU ratN 32 V 32 V 32 V 32 V 32 V 32 V 32 V 32 V 32 V 32 V RK KennfarbePrüfleitung Colour-code Test cable Code couleur Test câble RK 2,20 mΩ 1,56 mΩ 1,03 mΩ 0,75 mΩ 0,65 mΩ 0,55 mΩ 0,42 mΩ 0,34 mΩ 0,29 mΩ 0,24 mΩ orange grün / green / vert rot / red / rouge gelb / yellow / jaune braun / brown / brun weiss / white / blanc blau / blue / bleu rosa / pink / rosé grau / grey / gris violett / violet / violet SpannungsfallSchaltvermögen Schaltvermögen Schmelzintegral Schmelzintegral Spannungsfall Breaking capacity integral Voltage dropVoltage drop Breaking capacity JouleJoule integral Chute de tension Pouvoir de coupure Intégral de Joule Chute de tension Pouvoir de coupure Intégral de Joule UD UD Standard max. IB I2t IB I 2t 2,5 mm² 4 mm² 6 mm² 6 mm² 10 mm² 10 mm² 16 mm² 25 mm² 25 mm² 16 mm² 80 mV 85 mV 75 mV 75 mV 70 mV 70 mV 65 mV 65 mV 70 mV 65mV 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 2,0 kA / 32 V, DC 1,5 kA / 32 V, DC 4.100 A²s 6.800 A²s 6.900 A²s 16.200 A²s 22.000 A²s 25.600 A²s 42.500 A²s 62.500 A²s 83.400 A²s 126.000 A²s zugehöriger Halter siehe Seite 43 / corresponding holder see page 43 / porte-fusible correspondant voir page 43 zugehöriger Prüfhalter siehe Seite 45 / corresponding test holder see page 45 / porte-fusible d'essai correspondant voir page 45 Schmelzzeit-Grenzwerte IN/ Irat 1,0 IN/Irat Schmelzzeit-Grenzwerte 30 A - 150 A >100 h IN/ Irat 0,75 IN/Irat 200 A >100 h Temps de fusion limité Pre-arcing time-limits 1,1 IN/Irat 1,5 IN/Irat Pre-arcing 300time-limits - 3600 s > 14.400 s 1,0 IN/Irat - 2,0 IN/Irat 3 - 300 s 3,0 IN/Irat 0,3 -Temps 3s 5,0 IN/Irat de fusion 0,1 - 1 slimits 1,35 IN/Irat 2,0IN/Irat 3,5 IN/Irat 6,0 IN/Irat - 1 - 15 s 0,3 - 5 s 0,1 - 1 s FI = 1,25 (max. Dauerstrom: 0,8 x IN / max. operating current: 0,8 x Ira t / max. courant permanent: 0,8 x Irat bei/at/à 23°C) 200A: FI = 1,25 (max. Dauerstrom: 0,5 x IN / max. operating current: 0,5 x Ira t / max. courant permanent: 0,5 x Irat bei/at/à 23°C) Letzte Ziffer der Art.-Nr. = Verpackungsindex / Last figure of article-no. = packaging code / Dernier chiffre du numéro d´article = code d´ emballage Letzte Ziffer der Art.-Nr. = Verpackungsindex / Last figure of article-no. = packaging code / Dernière chiffre du numéro d´article = code d´ emballage