Product Data Sheets - BARO-LUBE GOLD SEAL

Transcription

Product Data Sheets - BARO-LUBE GOLD SEAL
BARO-LUBE GOLD SEAL™
Lubricant
Product
Description
Applications /
Functions
Advantages
Typical
Properties
Recommended
Treatment
Product Data Sheet
BARO-LUBE GOLD SEAL™ lubricant is a blend of surfactants and lubricants specifically formulated to be
an effective alternative to oil-based lubricants where environmental constraints preclude the use of
hydrocarbon-based additives. This concentrated blend of lubricity additives can provide optimal extreme
pressure (metal-to-metal) and borehole (metal-to-formation) lubricity without having a negative affect on the
drilling fluid properties. BARO-LUBE GOLD SEAL lubricant is water soluble, does not form a sheen and is
biodegradable. Caution should be observed when using this product in drilling fluids containing high
concentrations of divalent cations, e.g. Calcium, and well temperatures of near 300°F (149°C) because
soaping out of this product could take place.
• BARO-LUBE GOLD SEAL lubricant can be used to reduce torque and drag and sticking shale problems.
• Is completely water soluble
• Does not form a sheen
• Is nonpolluting and biodegradable
•
•
•
•
Appearance
Flash point
Specific gravity
Solubility
Clear amber liquid
>200°F (93°C)
0.94
Water soluble
BARO-LUBE GOLD SEAL lubricant is a concentrated product; add 2-5% by volume. 2% is recommended
for all but the most severe cases.
Note: Heavily weighted drilling fluids may require slightly higher concentrations.
Packaging
BARO-LUBE GOLD SEAL lubricant is packaged in 1-gal (3.8-l), 5-g (18.9-l), 55-gal (208-l) drums and in
bulk.
www.halliburton.com/baroid
Because the conditions of use of this product are beyond the seller's control, the product is sold without warranty either express or implied and upon condition that purchaser make its own test to determine the suitability for
purchaser's application. Purchaser assumes all risk of use and handling of this product. This product will be replaced if defective in manufacture or packaging or if damaged. Except for such replacement, seller is not liable
for any damages caused by this product or its use. The statements and recommendations made herein are believed to be accurate. No guarantee of their accuracy is made, however.
BARO-LUBE GOLD SEAL is a trademark of Halliburton © 2010 Halliburton All Rights Reserved
9/3/2010