Surface Preparation Flooring Adhesives Profiles
Transcription
Surface Preparation Flooring Adhesives Profiles
Surface Preparation THE STRONG CONNECTION Flooring Adhesives Profiles THE STRONG CONNECTION The Eurocol brand is offered by H.B. Fuller Construction Products Inc. – a leading provider of technologically advanced construction materials and solutions to the commercial, industrial and residential construction industry. In addition to the Eurocol brand, the company is recognized for its many trusted brands - TEC®, CHAPCO®, Grout Boost®, Foster®, AIM™ and others – which are available through an extensive network of distributors and dealers, as well as home improvement retailers throughout the world. For more information, visit tecspecialty.com/europe and hbfuller-cp.com. Surface Preparation 3-6 Flooring Adhesives 7 - 13 Profiles 14 Disclaimer 14 tecspecialty.com/europe 2 ■ Moisture mitigation ■ Primer ■ Self levelling compounds ■ Mortars ■ Resilient adhesives ■ Linoleum adhesives ■ Rubber adhesives ■ Carpet adhesives ■ Wood flooring adhesives ■ Conductive adhesives ■ Artificial turf adhesive ■ Contact adhesive Surface Preparation General-Purpose Primer Primaire Universel 044-2 Applications: • General-purpose primer on new cement-based substrates On older uncovered substrates and older existing floor coverings • For interior floorings and walls Features and Benefits: • Multipurpose and performance product • High penetration capacity • Offers high bond strength after drying • Ready to use - Low consumption depending on application • Solvent-free - installer-friendly • Shelf life:12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 10 kg / jerry can 60 jerry cans / 600 kg 100 to 200 gr/m² White Moisture Barrier Primer Euroblock Reno 021 Applications: • For preventing/mitigating moisture vapor emission in high moisture substrates (<10%) before applying levelling cement/plaster-based compound, thin mortar layer, direct bonding of floor covering, etc. • Multipurpose primer on new cement-based substrates - on older uncovered substrates and existing older ceramic coverings • For interior - exterior installation Features and Benefits: • Multipurpose and performance product - provides efficient and durable moisture barrier • High penetration capacity - high adhesion including to humid substrates • Offers high impact strength in high traffic environments, including in industry • Construction system allows to make important savings in site labor time • Solvent-free - installer-friendly • To be used in combination with our 021 green coloring agent and quartz sand 846 • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 10 kg / can 60 pails / 600 kg 350 to 700 gr/m² Yellowish Surface Preparation 3 Surface Preparation Self-Levelling Compound - P3 Class - CSTB Certified No. 06S40 / 59S40 Helmiplan HP3 963 Applications: • Interior floor surface preparation before installing floor covering such as PVC, linoleum, rubber, textile, ceramic tiles, bonded wood flooring… • On new cement-based subfloors - On older uncovered substrates and on existing floor coverings Features and Benefits: • Self-smoothing levelling premium quality mortar - Easy to use • Fast hardening, including under difficult weather conditions • High impact penetration hardness • Offers smooth and uniform surface quality before covering • Pumpable, pourable, free-flowing • Shelf life: 6 months in original unopened packaging and protected from moisture and heat Packaging Packaging/Pallet Spreading Capacity Color 25 kg/bag 42 bags / 1050 kg 1.5 kg/m² / mm depth Grey - Green Fiber-Reinforced Self-Levelling Compound - P3 Class CSTB Certified No. 06 S 25 / 59 S 25 Helmiplan Fibrex 967 Applications: • Designed for renovation works, interior floor surface preparation before installing floor covering such as PVC, linoleum, rubber, textile, ceramic tiles, bonded wood flooring… • On older uncovered substrates and on existing floor coverings • On wood substrates subject to deformation Features and Benefits: • Fiber-reinforced premium quality leveller - high self-smoothing capacity • Particularly suitable for renovating works on wood substrates • 3 - 30mm layer in one single pour for P3 Class premises • High impact strength hardness • Fine and uniform surface quality before covering • Pumpable, pourable, free-flowing • Shelf life: 6 months in original unopened packaging and protected from moisture and heat Packaging 25 kg/bag Packaging/Pallet Spreading Capacity Color 24 bags / 600 kg 1.5 kg/m² / mm depth Grey 42 bags / 1050 kg tecspecialty.com/europe 4 Self-Levelling Compound - P4 S Class - CSTB Certified 226 S 84 Europlan Super Plus 980 Applications: • Designed for optimized and multipurpose surface preparation of interior technical floors subject to high compressive strength is better than high crush resistance • Compound used for levelling out the subfloor or for pouring screed in thin layer of up to 30mm thickness with “845 quartz sand” added • On new cement-based subfloors - On older uncovered substrates and on existing floor coverings Features and Benefits: • Self-smoothing levelling premium quality mortar • Recommended for floors with high traffic (P4/P4S) in large kitchen facilities, hospital hallways, airports, railroad stations, gymnasiums, etc… • High crush resistance • Uniform surface quality before covering - may be painted • Pumpable, pourable, free-flowing • Shelf life: 6 months in original unopened packaging and protected from moisture and heat Packaging Packaging/Pallet Spreading Capacity Color 23 kg/bag 42 bags / 966 kg 1.5kg/m² / mm depth Grey Fast-Setting High Quality Self-Levelling Compound Europlan Direct Rapid 991 Applications: • Designed for quick interior floor surface preparation before installing floor covering such as PVC, linoleum, rubber, textile, ceramic tiles, bonded wood flooring… • On new cement-based substrates - on older uncovered substrates and on existing floor coverings Features and Benefits: • Self-smoothing premium quality mortar • Very quick hardening, including in unfavorable weather conditions • Particularly suitable for renovation works in occupied premises • High mechanical properties • Fine and uniform surface quality before covering • Shelf life: 6 months in original unopened packaging and protected from moisture and heat Packaging Packaging/Pallet Spreading Capacity Color 23 kg/bag 42 bags / 966 kg 1.5kg/m² / mm depth Grey Surface Preparation 5 Surface Preparation Fast Set Non-Sag Cement Mortar for Levelling and Planishing Europlan Quick 940 Applications: • Flexible and ideal product to fill various voids and grooves and level important unevenness of cement screeds, concrete substrates, etc. • For fast-set ramping of surfaces of up to 50mm • For surface preparation of interior premises Features and Benefits: • Fast set premium quality mortar of thick consistency • Multipurpose product - quickly ready for application • 1 - 50mm layer in one single pour for P3 Class premises • High impact strength hardness • Fine and uniform surface quality - May be smoothed • Fast application system • Shelf life: 6 months in original unopened packaging and protected from moisture and heat Packaging Packaging/Pallet Spreading Capacity Color 23 kg / bag 30 bags / 690 kg 1.5kg/m² / mm depth Grey Dry Silica Sand - 0.5 to 1.2mm Grade Sable de quartz 845 Applications: • To create linkage bond after spreading until saturation on layer of 021 Euroblock Reno 028 Euroblock Rapid - 910 Europlan PU - 816 Crack treatment before levelling • As additional filler • To allow for greater depth of levelling Features and Benefits: • Interior and exterior applications • Mitigate tension in levelling operations and mortars • Saves cost of repair mortars (for instance for patching large cracks) • Shelf life: Unlimited in original unopened packaging and protected from moisture • 846 product is specially designed for use with 021 Euroblock Reno product according to technical evaluation Packaging Spreading Capacity Color 25 kg / bag Variable Natural tecspecialty.com/europe 6 Flooring Adhesives Fiber-Reinforced Dispersion-Based Adhesive with Very High Performance Eurostar Fibre 643 Applications: • General purpose adhesive for bonding of resilient floorings, including: - Rubber with sanded backing, in sheets or tiles of up to 4mm thickness - PVC tiles or sheets (homogeneous - multiple layers) - linoleum sheets - textile and needle felt flooring - decorative designs (Luxurious Vinyl Tiles) • On even and levelled absorbing substrates Features and Benefits: • Ange bleu and EC1, Solvent-free with very low VOC-emission (Volatile Organic Compounds) • Fiber-reinforcement: provides the adhesive with high ball penetration hardness • Very large field of application • High initial grab (tack) - high final bonding strength • Excellent resistance to plasticizing agents • Shelf life: 15 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 13 kg / pail 44 pails / 572 kg 250 to 450 gr/m² White High Performance Dispersion-Based Adhesive for PVC and Rubber Flooring Eurosafe Special 540 Applications: • Multipurpose adhesive for strong bonding of resilient flooring materials, including PVC, rubber with carded backing, in sheets or tiles up to 4mm thickness - Linoleum with an soundproofing layer backing of Marmoleum Décibel type - PVC to PVC - Polyolefin flooring material • On both absorbing and non-absorbing substrates Features and Benefits: • Superior bonding capacity making it suitable for various applications (bonding in wet conditions - self-bonding - contact) • High initial and final bonding, including to enclosed substrates • Excellent resistance to plasticizing agents • Solvent-free - installer-friendly • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 20 kg / pail 32 pails / 640 kg 250 to 350 gr/m² Light Beige Flooring Adhesives 7 Flooring Adhesives High Performance Dispersion-Based Adhesive for Technical Bonding Eurosafe Super Plus 522 Applications: • Multipurpose adhesive for floors and walls (e.g. bonding in shower wet conditions Self-bonding to intermediate sublayer of 805 Helmibase type and similar...) • On absorbing and non-absorbing substrates Features and Benefits: • Widely acclaimed adhesive with recognized qualities • Very long working time available due to its open time • High product efficiency - low consumption • Solvent-free - installer-friendly • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 900 gr / box Case of 12 200 to 350 gr/m² Light Beige 5 kg / pail 90 pails / 450 kg 200 to 350 gr/m² Light Beige 20 kg / pail 32 pails / 640 kg 200 to 350 gr/m² Light Beige Dispersion-Based Adhesive for Linoleum Floor Covering Eurostar Lino Plus 614 Applications: • Fast and high strength bonding of linoleum floor coverings (sheets and tiles) - Cork subfloor • Interior flooring, including premises subject to heavy traffic (school buildings, hospital hallways, gymnasiums, etc.) • On even, levelled and absorbing substrates Features and Benefits: • EC1, Solvent-free with very low COV emission (Volatile Organic Compounds) • Adhesive film hardens after setting, ensuring high linoleum dimensional stability • Very short gumming time - Fast set • High initial grab (tack) - High final bonding strength • Low consumption • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 11 kg / pail 44 pails / 484 kg 260 to 340 gr/m² White tecspecialty.com/europe 8 Water Dispersion-Based Adhesive for Bonding Textile Coverings Eurostar Tex 609 Applications: • Multipurpose adhesive for bonding various textile flooring materials (carpets - needle felt Coco-Sisal - sea reed with latex backing, etc.) • Suitable for all types of backing • On even, levelled and absorbing substrates - for interior flooring Features and Benefits: • EC1, solvent-free with very low VOC emission (Volatile Organic Compounds) • High bonding capacity - fast set • High cohesion - high final resistance • Suitable for radiant heated subfloors • Shelf life: in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 14 kg / pail 44 pails / 616 kg 300 to 400 gr/m² Beige Permanent Fixative for Loose Laid Tiles Eurosafe HR 541 Applications: • Recommended for installing loose laid tiles with asphalt felt or PVC backing • On normally absorbing or non-absorbing substrates - even and smooth surface - fine and uniform - on older uncovered substrates and on existing floor coverings Features and Benefits: • Very high initial grab (prevents shifting of tiles under pedestrian traffic or action of roller-caster-chairs) • Low consumption - easy application with roller • Allows for removal of tiles in the long run, including with subfloor heating • Solvent-free - installer-friendly, EC1 Plus with very low VOC emission • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet 5 kg / pail 90 pails / 450 kg 10 kg / pail 44 pails / 440 kg Spreading Capacity Color 80 to 150 gr/m² White Flooring Adhesives 9 Flooring Adhesives Polychloroprene-Based Contact Fixation Adhesive Eurosol Contact 233 Applications: • For fast, powerful and instant bonding of floor coverings (rubber, linoleum, ...) and wall coverings, profiles and other materials such as wood and wood-based products, laminates, rigid phenolic or polyurethane foam, polyester plates, rigid PVC, aluminum, etc. • On both absorbing and non-absorbing substrates Features and Benefits: • Ensures extra strong fixation - Immediate set • Fairly fluid, easy application • Long open time • Large field of application • Toluen-free - high solvent content • Shelf life: 12 months in original unopened packaging at room temperature Product Packaging/Carton Packaging/Pallet Spreading Capacity Color 650 gr / box 6 boxes - 150 gr/m²/pour Amber 5 kg / pail - 96 pails / 480 kg 150 gr/m²/pour Amber 15 kg / pail - 33 pails / 495 kg 150 gr/m²/pour Amber Flexible 2-part Epoxy Adhesive Euromix Epoxy Plus 131 Applications: • Epoxy adhesive ensuring extra strong bonding in virtually all situations • For floor coverings subject to extreme impact conditions in building construction, sport and industrial environments • For bonding of interior/exterior floor coverings subject to high mechanical stress due to humidity or temperature conditions, or to high dynamic stress due to heavy load carried over, on even, absorbing/non-absorbing substrates Features and Benefits: • Large field of application for floor covering subject to high impact stress in dry or humid conditions (e.g. bonding of PVC covering onto 805 Helmibase sub-layer up to 10 % dryness of substrate) • Extra final bonding strength, including in enclosed locations • High modulus of elasticity • Suitable for installation on floor heating and cooling systems • Shelf life: 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color Resin: 5 kg / can + hardener: 5 kg / can - 300 to 1200 gr/m² Grey tecspecialty.com/europe 10 1-Component, Solvent-Free MSPS Adhesive Eurowood Plus 153 Applications: • Apply with notch trowel for plain bonding of parquets • Solvent-free Features and Benefits: • Solvent-free adhesive with very low VOC emission (Volatile Organic Compounds) Class EC1-R • Free from isocyanates and silicones - cross links under the action of air and substrate moisture • Flexible hardening of adhesive film after set - retains high compactness • Contributes to sound deadening of parquets • Easy to apply - has no effect on varnishes • Suitable for low temperature subfloor heating installation • Shelf life: 9 months in unopened original packaging at room temperature - keep out of frost Packaging Packaging/Pallet Spreading Capacity Color 3 bags of 5kg in a 15kg/pail 44 pails / 660 kg 800 to 1100 g/m² Beige Static Conductive Floor Primer Europrimer EL 041 Applications: • For installing electro-conductive floor coverings: PVC - needle felt and other textile materials (do not use under conductive rubber floor coverings: non compatible) • Only on absorbing and levelled substrates • Only in combination with a conductive dispersion-based adhesive Features and Benefits: • May replace copper strip system (saves time and costs) • Ensures high conductivity resistance • Easy to use - apply with roller • Ready made - low consumption • Solvent-free - installer-friendly • Shelf life: up to 6 months in original unopened packaging at room temperature Product Packaging/Pallet Spreading Capacity Color 10 kg / jerry can - 100 to 150 gr/m² Black Flooring Adhesives 11 Flooring Adhesives Conductive Acrylic Adhesive Eurosafe Plus EL 523 Applications: • For bonding conductive, resilient and textile floor coverings in sheets or tiles • On even, levelled and absorbing substrates Features and Benefits: • Ensures perfect electric conductivity for at least 10 years (Tests by LCIE) • Non-flammable during application • Long open time • High initial grab (tack) - high final bond strength • Low consumption - easy to apply - odorless • Shelf life: up to 12 months in original unopened packaging at room temperature Packaging Packaging/Pallet Spreading Capacity Color 12 kg / pail 44 pails / 528 kg 250 to 400 gr/m² according to flooring material Light Grey Electrolyte Copper Strip Copper Strip 801 Applications: • Self-adhesive copper strip to accomplish an earth connection when fixing conductive floor covering Features and Benefits: • Easy application • Self-adhesive • 20m rolls High Performance Seaming Tape for Synthetic Turf Bonding Seaming Tape Applications: • For installation of exterior sports grounds (tennis, basketball, etc) Features and Benefits: • Structural bonding strip virtually indestructible • Ensures high strength bonding of synthetic turf sheets tecspecialty.com/europe 12 • • Bond strip structure is made of various synthetic layers: upper face with rough and dense surface for optimal adhesion; and waterproof lower face. This makes strips practically indestructible Packaging: 100 x 0.30m rolls 2-Part Adhesive for Bonding Synthetic Turf in Damp or Dry Conditions - Solvent-Free 2K Swift Bond Turf Adhesive 160 Applications: • Bonding of synthetic turf in damp/dry conditions, on plain surface or on seaming tape • In favourable and unfavourable (wet) weather conditions • Interior/exterior Features and Benefits: • High performance bonding even in damp environment • Excellent resistance to humidity and heat • Flexible film after polymerization • High final bonding strength • Shelf life: 12 months in original unopened packaging at room temperature and dry conditions Packaging Packaging/Pallet Spreading Capacity Color 13.8kg combined metal packaging 45 cans / 621 kg 500 to 1300 gr/m² Green after mixing 13.8kg combined plastic packaging 45 cans / 621 kg 500 to 1300 gr/m² Green after mixing 2-Part Adhesive for Bonding Synthetic Turf - Solvent-Free 2K Euromix Sport Extra 149 Applications: • Bonding of synthetic turf in dry conditions, on plain surface or on seaming tape • In favourable and unfavourable (wet) weather conditions • Interior/exterior Features and Benefits: • High performance bonding • Excellent resistance to humidity and heat • Flexible film after polymerization • High final bonding strength • Shelf life: 12 months in original unopened packaging at room temperature and dry conditions Packaging Packaging/Pallet Spreading Capacity Color 13.8kg combined metal packaging 45 cans / 594 kg 500 to 1300 gr/m² Green after mixing 16.5kg combined plastic packaging 32 cans / 528 kg 500 to 1300 gr/m² Green after mixing Flooring Adhesives 13 Profiles Profiles A60/A80/A100 Description: • PVC Hard-Foam-Skirtings 80 mm or 100 mm • Damp proof and keeps its shape for a long time • Flexible soft lips for perfect floor and wall end Colors: • 2011 White • 2002 Light grey • 2003 Black • 2008 Dark grey • Others colors available / Specific color creation: please consult us Quantity: • Carton of 25 pieces of 4,00 m = 100 m Disclaimer Disclaimer IMPORTANT: Information, specifications, procedures and recommendations provided (“information”) are based on our experience and we believe this to be accurate. No representation, guarantee or warranty is made as to the accuracy or completeness of the information or that use of the product will avoid losses or damages or give desired results. It is purchaser’s sole responsibility to test and determine the suitability of any product for the intended use. Tests should be repeated if materials or conditions change in any way. No employee, distributor or agent has any right to change these facts and offer a guarantee of performance. NOTE TO USER: by ordering/receiving product you accept the H.B. Fuller General Terms and Conditions of Sale applicable in the region. Please request a copy if you have not received these. These Terms and Conditions contain disclaimers of implied warranties (including but not limited to disclaiming warranties of fitness for a particular purpose) and limits of liability. All other terms are rejected. In any event, the total aggregate liability of H.B. Fuller for any claim or series of related claims however arising, in contract, tort (including negligence), breach of statutory duty, misrepresentation, strict liability or otherwise, is limited to replacement of affected products or refund of the purchase price for affected products. H.B. Fuller shall not be liable for loss of profit, loss of margin, loss of contract, loss of business, loss of goodwill or any indirect or consequential losses arising out of or in connection with product supply. Nothing in any term shall operate to exclude or limit H.B. Fuller’s liability for fraud, gross negligence or for death or personal injury caused by negligence or for breach of any mandatory implied terms. tecspecialty.com/europe 14 15 H.B. Fuller Adhesives France SAS 56 rue du général de Gaulle CS 10008 67250 Surbourg France Tel. + 33 (0)3 8 05 68 68 Fax +33 (0)3 88 80 54 14 [email protected] www.hbfuller.com Form #: EUFLB0213-16 ©Copyright 2013 H.B. Fuller Construction Products Inc. 16