Adhesive tape C6

HIGH-QUALITY INSULATION.
SUSTAINABLE LIVING.
Adhesive tape C6
All-round adhesive tape with fleece backing: Airtight bonding of vapour check and airtightness membrane as well as airtight wood-based panels, inside. Furthermore outside uasge,
airtight bonding of roof-mounted vapour check and refurbishment vapour check and airtightness membrane. Windproofing of sarking membrane, roof lining membrane and wall lining
membrane. Wind-proof bonding of wood-based panels used as sarking boards. All bonding, indoor and outdoor, can be between the same material as well as with adjacent structural
components with a smooth, non-mineral surface (e.g. pipe penetrations, roof windows).
YOUR ADVANTAGES
SUBSTRATES
All-round adhesive tape for internal and external
use, 6 months outdoor exposure
Easy to tear off by hand with the soft fleece
backing
Before bonding, the substrate surface should be swept clean with a broom or wiped with a cloth. Bonding to frozen
surfaces is not possible. The substrate material must be free of water-repellent substances (e.g. grease or silicone).
The substrate must offer sufficient load-bearing capacity.
For airtight bonds according to DIN 4108-7,
SIA 180 and OENORM B 8110-2
Top values in the hazardous substance test
The best results for protecting the structure can be achieved on high-quality substrates. You are responsible for
checking the suitability of the substrate. Adhesion tests are recommended.
FORMS OF DELIVERY
TECHNICAL DATA
SUBSTANCE
Backing
special PP fleece
Length
Width
Packing units
Trade unit
Adhesive
waterproof SOLID adhesive
30 m
60 mm
10
rolls
Release paper
siliconized paper
ATTRIBUTE
VALUE
Colour
green
UV stability and outdoor exposure
6 months
Application temperature
from -10 °C
Temperature resistance
permanent -40 °C to +90 °C
Storage
cool and dry
ANY QUESTIONS? USE THE FOLLOWING ADDRESSES FOR EXPERT ADVICE:
HOMATHERM GmbH · Ahornweg 1 · D-06536 Berga · Hotline +49 34651 4 1 661 · Fax +49 34651 41 639 · [email protected] · www.homatherm.com
International Hotline +44 844 8802478
Information sur le niveau
d‘émission
de
substances
volatiles dans l‘air intérieur, présentant un risque de
toxicité par inhalation, sur une
échelle de classe allant de A+
(très faibles émissions) à C
(fortes émissions)
This document is applicable in conjunction with other HOMATHERM® documentation. Please heed our detailed application notes in your application. National building regulations must be complied with. Information on and suitability of the material for the intended
purpose must in each case be examined by the customer. HOMATHERM® accepts no liability. This also applies to printing errors and subsequent amendments to technical data. Version: 05-2014