Korrektur zu den Betriebsanleitungen 19375204 - SEW
Transcription
Korrektur zu den Betriebsanleitungen 19375204 - SEW
Antriebstechnik \ Antriebsautomatisierung \ Systemintegration \ Services Korrektur zu den Betriebsanleitungen 19375204, 19376006, 19375603, 19376405 Elektronikmotor DRC Information Regarding UL Ausgabe 04/2013 20119739 / DE Korrektur Betroffene Dokumentation 1 1 Korrektur HINWEIS Für den Elektronikmotor DRC haben sich Änderungen ergeben, die in diesem Zusatz beschrieben sind: • Geändertes Kapitel "UL-compliant installation / UL-gerechte Installation". Dieses Dokument ersetzt nicht die ausführliche Betriebsanleitung! 1.1 Betroffene Dokumentation Die Korrekturen sind für die folgenden Druckschriften gültig: • Betriebsanleitung Elektronikmotor DRC.-...-DBC (Sachnummer 19375204, Ausgabe 02/2012) • Betriebsanleitung Elektronikmotor DRC.-...-DAC (Sachnummer 19376006, Ausgabe 02/2012) • Betriebsanleitung Elektronikmotor DRC.-...-DSC (Sachnummer 19375603, Ausgabe 02/2012) • Betriebsanleitung Elektronikmotor DRC.-...-SNI (Sachnummer 19376405, Ausgabe 02/2012) 2 Korrektur – Information Regarding UL Elektrische Installation UL-compliant installation 2 2 Elektrische Installation HINWEIS Das folgende Kapitel wird unabhängig von der Sprache der Ihnen vorliegenden Druckschrift aufgrund von UL-Anforderungen immer in englischer Sprache abgedruckt. 2.1 UL-compliant installation 2.1.1 Power terminals Observe the following notes for UL-compliant installation: 2.1.2 • Use 75 °C copper wire only. • DRC uses cage clamp terminals Short circuit current rating Suitable for use on a circuit capable of delivering not more than 200,000 rms symmetrical amperes when protected by 40 A, 600 V non-semiconductor fuses or 500 V minimum 40 A maximum inverse time circuit breakers. • 2.1.3 DRC, the max. voltage is limited to 500 V. Branch circuit protection Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit protection must be provided in accordance with the National Electrical Code and any additional local codes. The table below list the permitted maximum branch circuit protection: 2.1.4 Series Non-semiconductor fuses Inverse time circuit breakers DRC 40 A / 600 V 500 V minimum / 40 A maximum Motor overload protection DRC is provided with load and speed-sensitive overload protection and thermal memory retention upon shutdown or power loss. The trip current is adjusted to 150% of the rated motor current. 2.1.5 Ambient temperature DRC is suitable for an ambient temperature of 40 °C, max. 60 °C with derated output current. To determine the output current rating at temperatures above 40 °C, the output current should be derated by 3.0% per K between 40 °C and 60 °C. 2.1.6 Wiring diagrams For wiring diagrams, refer to chapter "Electrical installation". Korrektur – Information Regarding UL 3 SEW-EURODRIVE—Driving the world SEW-EURODRIVE Driving the world SEW-EURODRIVE GmbH & Co KG P.O. Box 3023 D-76642 Bruchsal/Germany Phone +49 7251 75-0 Fax +49 7251 75-1970 [email protected] www.sew-eurodrive.com