glass bead gun with atomizing air

Transcription

glass bead gun with atomizing air
P90
GLASS BEAD GUN WITH ATOMIZING AIR
This gun is equipped with a hardened steel closing piston. It can be fed with glass beads either by gravity or from a
pressurized tank. It has two inputs for beads.
CONNECTIONS:
Opening air Atomizing air
Ø passage of beads
BEAD NOZZLE:
Ø 6 to 14 mm
1/4 ’’
3/8 ”
18.5 mm
AIR NOZZLE:
Ø 2 mm
DIFFUSER
The gun is equipped with an adjustable (orientation and width) diffuser to spread the glass beads equally over a wide
line up to 30 cm. It has a stiffening plate in carbide to increase its lifetime. This can be easily replaced when it wears out.
The diffuser can be equipped with a glass bead sensor to avoid having a line without glass beads. This sensor is connected
to an electronic device, which manages the gun(s) in action and the alarms (on request).
RECOMMENDATIONS
•Block the suction tube when feeding by pressurized tank
•For air connection, use rather a Ø 8 mm hose
•Use an opening air pressure of 6 bar (87 psi)
SPECIFICATIONS
Dimensions:
Weight:
WITHOUT DIFFUSER
240 x 100 mm
2.2 kg
WITH DIFFUSER
350 x 100 mm
2.9 kg
Edwin Kamber SA reserves the right to change at any time this information
www.kambersa.ch
II 2G c T6
0314
8416A
8327
8416A
8311
9507
6626 8403
9504
6640
8322
9510
4033
18133
8407
9500
9566
2027
8404
9508
9501
8307B
8324 2017
7004
8573
8318
8059
4033
9509
2026
9510
2024
8325
2063
9526
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
Schéma 1
0314
9503
9535*
9506
9564
9566
9502
6712
9505
2047
8062
9566
4003
8058
640
*Indiquer N° ou Ø
*Indicate no. or Ø
*Indicar n.° o Ø
*Nr. oder Ø angeben
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
Schéma 2
0314
7515A
2026
9514
9515AL
4515N
2026
9514
KAMBER SA • Chemin des Champs-Courbes 19 • CH-1024 Ecublens
Tel. +41 21 691 69 51 • Fax +41 21 691 69 54 • [email protected] • www.kambersa.ch
4515N
Diffuseurs 1
0314

Documents pareils

glass bead gun with atomizing air

glass bead gun with atomizing air line up to 30 cm. It has a stiffening plate in carbide to increase its lifetime. This can be easily replaced when it wears out. The diffuser can be equipped with a glass bead sensor to avoid having...

Plus en détail