dover 176-nsu - Leds-C4
Transcription
dover 176-nsu - Leds-C4
DOVER 176-NSU IN TECHNICAL CHARACTERISTICS The photograph may not match the reference exactly. Please read the product description to identify the finish. Type: Floor lamp IP Protection degrees: IP20 Location: DRY Light source 1: 1 x E26 MAX 60W Total power consumption (W): 60 Voltage / Frequency: 120V/60Hz Warranty (Years): 2 Units per box: 1 Pes net (lb): 10.84 EAN: 8435381433000 Stability: >15º MATERIALS / FINISHES Structure material: Steel Download photometric file .ldt /.ies Structure finish: Satin nickel LEDS-C4 reserves the right to make the necessary technical changes they deem adequate, in order to improve the features of the product. Please consult the sales team to clarify any doubt. (+34) 973 468 100 [email protected] www.leds-c4.com OPTIONAL ACCESORIES PAN-184-14 Shade, white, Ø320mm Structure material: Steel Diffuser material: Fabric shade Diffuser finish: White PAN-184-BY Shade, beige fabric, Ø320mm Structure material: Steel Diffuser material: Fabric shade Diffuser finish: Sandblasted IP20 PAN-185-J6 Shade, brown, pleated, Ø320mm Structure material: Steel Diffuser material: Ribboned shade Diffuser finish: Brown PAN-181-14 Shade, white, 300x300x250mm Structure material: Steel Diffuser material: Fabric shade Diffuser finish: White IP20 LEDS-C4 reserves the right to make the necessary technical changes they deem adequate, in order to improve the features of the product. Please consult the sales team to clarify any doubt. (+34) 973 468 100 [email protected] www.leds-c4.com PAN-181-BY Shade, beige fabric, 300x300x250mm Structure material: Steel Diffuser material: Fabric shade Diffuser finish: Sandblasted IP20 PAN-189-20 Shade, beige, pleated,300x300x250mm Structure material: Steel Diffuser material: Fabric shade Diffuser finish: Beige IP20 LEDS-C4 reserves the right to make the necessary technical changes they deem adequate, in order to improve the features of the product. Please consult the sales team to clarify any doubt. (+34) 973 468 100 [email protected] www.leds-c4.com Luminaire Code 176-NS Name Pie DOVER 1x60W E27 incand Line Eulumdat Measurem. Code 172-NS Name Pie DOVER 1x60W E27 incand Date 22-04-2010 Lamp Code Number Position Efficiency 67.22% Coordinate system CG Total Flux Maximum value 100.07 cd Position C=90.00 G=40.00 Double Symmetrical 230 mm 230 mm Height Height CLAS A CL 60 1 710.00 lm Round Luminaire Round Luminous Area Diam. Diam. Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90° 0.041548 m2 0.040250 m2 0.040250 m2 Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76° 0.040250 m2 0.040250 m2 0.049106 m2 Symmetry Type Measurement Distance Double Symmetrical 0.00 Maximum Gamma Angle Measurement Flux 180 710.00 lm Operator Temperature Humidity Notes Asselum 25.00 °C 60.00 % Source voltage Source current Photocell Line Eulumdat Luminaire Lamps Name CLAS A CL 60 - 60.00 W Code CLAS A CL 60 C.I.E. F UTE 175 mm 175 mm 37 77 91 56 67 0.38 E + 0.29 T D DIN 5040 B NBN Flux [lm] 710.00 Pow. [W] Q.ty 60.00 1 C21 BZ 6 / 0.8 / BZ 5 Diam=230mm 90 135° Gamma Angles 180° 165° 150° 135° 0 80 180 120° 120° 60 270 40 C Halfplanes 180.0 0.0 270.0 105° 105° 20 90.0 90° 90° 20 75° 75° 40 ULOR 29.40 % DLOR 37.82 % RN 43.73 % 60 60° 60° 80 cd 100 45° LITESTAR (c)OxyTech Srl www.oxytech.it 30° 15° 0° 15° 30° 45° Page 1 LEDS, C4 S.A. CIF/VAT: A-59.410.910 C/ Afueras s/n -TORA- 25750 (LLEIDA) SPAIN TEL: 34 (73) 46 81 02 FAX: 34 (73) 46 81 06 FIGURE Nº 1. UNPACK THE FIXTURE: CHECK THE CONTENTS OF THE BOX. YOU SHOULD RECEIVE: FIGURE Nº 1. DÉBALLER LE PLAFONIER: VÉRIFIER LE CONTENU DU CARTON, VOUS DEVEZ RECEVOIR: SHEET: 1/1 EDITION: 01 REF: 176U 2 3 4 B 5 6 CAUTION: ATTENTION: "Warning", "This product is to be installed by a qualified electrician only." "Suitable for dry locations only" "Attention", le raccordement électrique sera effectué par un téchnicien électricien qualifié" "Adéquat seulement en lieux secs." CAUTION: 1.- Wrong lighting installation can be dangerous for your safety. 2.- Before starting, disconnect the power by turning off the general switch of the electric installation. 3.- Install light bulbs (not provided) that must not exceed markings on the fixture. 4.- To change the bulbs, disconnect the power by turning off the general switch and wait for the bulbs cool down. INSTALLATION: 1.- Assembly according to the attached instructions. ELECTRICAL CONNECTIONS: ATTENTION: 1. Une mauvaise installation peut compromettre votre sécurité. 2. Déconnecter la tension du réseau d'alimentation avant de réaliser toute opération. 3. Installer les ampoules (non fournies), ne pas utiliser d'ampoules d'un autre type ou d'une puissance supérieure à celle indiquée sur l'étiquette de la lampe. 4. Pour changer les ampoules, déconnecter la tension du réseau d'alimention et laisser refroider les ampoules. INSTALLATION: 1. Suivre le mode d’emploi quand vous faites le montage. RACCORDEMENTS ÉLECTRIQUES: