Setup Guide
Transcription
Setup Guide
Setup Guide Setup Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference. Guide d'installation Lire ce guide avant d’utiliser l’appareil. Après l’avoir lu, ranger ce guide dans un endroit sûr afin de pouvoir le consulter ultérieurement. Setuphandbuch Bitte lesen Sie diese Anleitung vor der Inbetriebnahme des Geräts durch. Bewahren Sie die Anleitung danach zum späteren Nachschlagen sorgfältig auf. Guida all'installazione Leggere la presente guida prima di utilizzare l’apparecchio, quindi conservarla in un luogo sicuro per riferimenti futuri. Guía de instalación Lea esta guía antes de utilizar el equipo. Después de leer esta guía, guárdela en un lugar seguro para futuras consultas. FAX-L2000/L2000IP Setup Guide Manuals for the Machine The manuals for this machine are divided as follows. Please refer to them for detailed information. The manuals supplied with optional equipment are included in the list below. Depending on the system configuration and product purchased, some manuals may not be needed. ENGLISH Guides with this symbol are printed manuals. • Basic Operations • Troubleshooting • Sending Instructions • Fax Instructions • Setting Up the Network Connection and Installing the CD-ROM Software • Remote User Interface Instructions • Network Connectivity and Setup Instructions • PCL Printer Instructions • PCL Printer Driver Installation and Instructions • Fax Driver and Cover Sheet Editor Installation and Instructions The machine illustration on the cover may differ slightly from your machine. CD-ROM Guides with this symbol are PDF manuals included on the accompanying CD-ROM. Reference Guide Sending Guide Facsimile Guide Setup Guide (This Document) CD-ROM CD-ROM CD-ROM CD-ROM Remote UI Guide CD-ROM Network Guide CD-ROM PCL Printer Guide CD-ROM PCL Driver Guide CD-ROM Fax Driver Guide with Cover Sheet Editor CD-ROM How This Manual Is Organized Connecting the Machine to a Network Chapter 2 Installing Software ENGLISH Chapter 1 Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon. Contents ENGLISH Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Illustrations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Abbreviations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Chapter 1 Connecting the Machine Setting Up the Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Settings Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a 100Base-TX Network . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a 10Base-T Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting through a Parallel Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting through a USB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 2 1-3 1-3 1-4 1-5 1-6 1-6 1-7 1-7 Installing Software About the User’s CD-ROM Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network User Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 2-2 2-3 2-4 Installing the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 For Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 When the Machine Is Connected to a Network . . . . . . . . . . . . . . . . . . . . . . . 2-5 Software Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the PCL Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Installer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Add Printer Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the LPR Port Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installing the NetBIOS/NetBEUI Port Monitor . . . . . . . . . . . . . . . . . . . . . . . . Installing DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . iv 2-6 2-6 2-6 2-6 2-8 2-8 2-8 2-9 2-9 ENGLISH Installing the NDPS Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installing the Fax Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Using the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Using the Add Printer Wizard for Windows . . . . . . . . . . . . . . . . . . . . . . .2-10 v Preface ENGLISH Thank you for purchasing the Canon FAX-L2000/L2000IP. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. I WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons, or damage to property if not performed correctly. In order to use the machine safely, always pay attention to these cautions. IMPORTANT NOTE vi Indicates operational requirements and restrictions. Be sure to read these items carefully in order to operate the machine correctly, and to avoid damage to the machine. Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended. Illustrations Used in This Manual ENGLISH Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the FAX-L2000/L2000IP. Abbreviations Used in This Manual In this manual, product names and model names are abbreviated as follows: Microsoft® Windows® 95 operating system: Microsoft® Windows® 98 operating system: Microsoft® Windows® Millennium Edition operating system: Microsoft® Windows NT® operating system: Microsoft® Windows® 2000 operating system: Microsoft® Windows® XP operating system: Microsoft® Windows® operating System: Novell NetWare®: Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows NetWare Trademarks Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated. Canon, the Canon Logo, FAX-L2000/L2000IP, and NetSpot are trademarks of Canon Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and in other countries. Wingdings is a trademark of Microsoft Corporation. NetWare and Novell are registered trademarks of Novell Inc. Novell Distributed Print Service and NDPS are trademarks of Novell Inc. PCL, PCL 5e, and PCL 6 are trademarks of Hewlett-Packard Company. UNIX is a registered trademark exclusively licensed from X/Open Company, Ltd. in the United States and in other countries. Other product and company names herein may be the trademarks of their respective owners. vii Copyright Copyright 2003 by Canon Inc. All rights reserved. ENGLISH No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc. viii Connecting the Machine 1 CHAPTER ENGLISH This chapter describes how to connect the machine to a computer or network so that you can print from the machine. Setting Up the Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Settings Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Connecting to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Connecting through a Parallel Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 Connecting through a USB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 1-1 Setting Up the Connection ENGLISH This section describes how to connect the machine to a personal computer or network, and describes the types of connectors and cables you should use. Settings Flowchart Making Connection Connect the necessary cables required for your environment. (See pages 1-3 through 1-7.) Using the interface cable Connecting to a network Environment Settings Enter the date and time, and the System Manager settings for system management operations. (See Chapter 1, "Before You Start Using This Machine," in the Facsimile Guide, and Chapter 4, "Restricting the Use of the Machine," in the Reference Guide.) Network Settings Enter the necessary network and server settings. (See Chapter 2, "Using a TCP/IP Network (Windows/UNIX)," in the Network Guide.) Printer Driver Installation Install the printer driver on personal computers. Install any utility software that may be necessary for your network environment. (See Chapter 2, "Getting Started," in the PCL Driver Guide.) 1-2 Setting Up the Connection Making Connections WARNING To avoid electrical shock, disconnect the power cord from the power outlet, before connecting an interface cable or network cable. (See Chapter 1, “Before You Start Using This Machine,” in the Reference Guide.) NOTE This machine is not supplied with an interface cable or a network cable. Please purchase the correct cable that is compatible with your computer or network. Connecting to a Network This machine has a built-in print server that is compatible with a TCP/IP network, and allows you to use the machine as a network printer for UNIX and Windows. The print server is supplied with a 100Base-TX/10Base-T port, which allows you to connect it to a LAN (Local Area Network). The connection examples in this section show you how to connect this machine to a network, depending on the type of LAN. IMPORTANT In order to connect the machine to your network, you need a LAN cable, hub and FAX-L2000 Network Printer/Fax Kit. NOTE • The print server of this machine is compatible with a NetWare network. For details, contact your local authorized Canon dealer. • The print server of this machine automatically detects the 100Base-TX or 10Base-T interface connection. • After connecting the network cable, perform the following procedures. For details on each procedure, refer to the corresponding manual. - Installing the printer driver. (See Chapter 2, “Getting Started,” in the PCL Driver Guide.) - Date/time and system management settings. (See Chapter 1, “Before You Start Using This Machine,” in the Facsimile Guide, and Chapter 4, “Restricting the Use of the Machine,” in the Reference Guide.) - Print server and network settings. (See Chapter 2, “Using a TCP/IP Network (Windows/UNIX),” in the Network Guide.) Making Connections 1-3 ENGLISH Connect the machine to a computer or network using an interface cable which supports bidirectional communication or a 100Base-TX or 10Base-T Ethernet cable. Connecting to a 100Base-TX Network Connect the 10Base-T/100Base-TX cable to the hub port using a Category 5 rated twisted-pair LAN cable for use on a 100Base-TX network. Then, connect the 10Base-T/100Base-TX cable to the optional Network Kit at the back of the FAX-L2000/L2000IP machine. If your computer is not compatible with a 100Base-TX network, you would also need a 100Base-TX network board. Computer without a 100Base-TX Port ENGLISH Computer with a 100Base-TX Port 100Base-TX LAN Board 100Base-TX Cable 100Base-TX Hub 10Base-T/100Base-TX Port NOTE The hub, LAN cable, and Network Kit that is connected to the LAN, should be compatible with a 100Base-TX network. For details, contact your local authorized Canon dealer. 1-4 Making Connections Connecting to a 10Base-T Network Connect the 10Base-T/100Base-TX cable to the hub port using a Category 3 or higher rated twisted-pair LAN cable for use on a 10Base-T network. Then, connect the 10Base-T/100Base-TX cable to the optional Network Kit at the back of the FAX-L2000/L2000IP machine. If your computer is not compatible with a 10Base-T network, you would also need a 10Base-T network board. Computer without a 10Base-T Port ENGLISH Computer with a 10Base-T Port 10Base-T LAN Board 10Base-T Cable 10Base-T Hub 10Base-T/100Base-TX Port NOTE The hub, LAN cable, and Network Kit that is connected to the LAN, should be compatible with a 10Base-T network. For details, contact your local authorized Canon dealer. Making Connections 1-5 Connecting through a Parallel Interface This machine can connect to a computer through a parallel interface. After making the connection, install the supplied printer driver and utility software that is compatible with the operating system on your computer. For more information on installing the printer driver and utility software, see “Software Installation Instructions,” on p. 2-6. ENGLISH Connecting to a Windows Computer Most IBM PC/AT, and other Windows compatible computers contain a parallel printer port connection (IEEE 1284 compliant). Connect a parallel printer cable to the back of your FAX-L2000/L2000IP machine, and to the printer port of your computer. Printer Driver Software Printer Cable Parallel Port * Printer Port a 36-pin Centronics cable. * Connect Be sure to secure the clips on both sides. IMPORTANT If you have connected a computer to the parallel port of this machine, some utility software cannot be used. For details, contact your local authorized Canon dealer. 1-6 Making Connections Connecting through a USB Interface This machine can connect to a computer through a USB interface. After making the connection, install the supplied printer driver and utility software that is compatible with the operating system on your computer. For more information on installing the printer driver and utility software, see “Software Installation Instructions,” on p. 2-6. Connect a USB cable to the back of your FAX-L2000/L2000IP machine, and to the USB port of your computer. Printer Driver Software USB Cable USB Port USB Port IMPORTANT If you have connected a computer to the USB port of this machine, some utility software cannot be used. For details, contact your local authorized Canon dealer. Making Connections 1-7 ENGLISH Connecting to a Windows Computer ENGLISH 1-8 Making Connections Installing Software 2 CHAPTER ENGLISH This chapter describes how to install the software on the User Software CD-ROM supplied with your machine. About the User’s CD-ROM Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 For Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 When the Machine Is Connected to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Software Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Installing the PCL Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 Installing Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installing the NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installing the LPR Port Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installing the NetBIOS/NetBEUI Port Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installing DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installing the NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installing the Fax Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 2-1 About the User’s CD-ROM Software ENGLISH This section provides a list of what is on the CD-ROM, and discusses which software you should install. CD-ROM Contents The CD-ROM contains the following software and documentation: Driver Software ■ Acrobat Reader Install this software to view online manuals. ■ PCL Printer Guide This PDF manual contains the PCL printer instructions. ■ PCL Driver Guide This PDF manual contains the PCL printer driver installation and instructions. ■ Fax Driver Guide with Cover Sheet Editor This PDF manual contains the fax driver and cover sheet editor installation and instructions. ■ PCL Printer Driver This is essential software when you print from Windows based applications. Be sure to install this software. ■ Fax Driver Install this software in order to use the facsimile function. ■ Font Manager 2000 Install this software to manage the 96 screen fonts which are included on the CD-ROM. ■ Bar Code and OCR TTF Install these fonts in order to display them correctly. 2-2 About the User’s CD-ROM Software NOTE • For the detailed installation procedures, refer to the PDF manuals and readme.txt files in each program folder on the CD-ROM. • The PDF manuals may differ depending on which FAX-L2000/L2000IP machine you have. Refer to the PDF manuals specifically for your machine. • To access the CD-ROM menu, insert the Driver Software CD into your CD-ROM drive ➞ double-click the [FAXL2000.EXE]. ENGLISH Network User Software ■ Acrobat Reader Install this software to view online manuals. ■ Network Guide (with the optional Canon Network Kit) This PDF manual contains detailed information on connecting the optional Network Kit to your network. ■ Remote UI Guide This PDF manual contains detailed information on controlling the machine via a web browser. ■ Setup Guide This PDF manual (this manual) contains detailed information on connecting your machine to a network and setting up the network environment. ■ NetSpot NetSpot is software that enables you to display the status of any machine that is connected to a computer or network on your computer screen. This software is applicable for Windows, Macintosh, and UNIX computers. ■ LPR Port Utility The LPR Port Utility for Microsoft Windows 95/98/Me is software that enables you to print from Windows 95/98/Me computers to printers on a TCP/IP network. ■ NetBIOS/NetBEUI Port Monitor Utility NetBIOS/NetBEUI Port Monitor Utility for Microsoft Windows 95/98/Me is software that enables you to print from Windows 95/98/Me computers to printers on a NetBIOS/ NetBEUI network. ■ DSE (Device Status Extension) DSE is software that enables you to browse the information on shared printers and manage print jobs via a web browser. This software can be installed into Windows 2000/XP computers only. About the User’s CD-ROM Software 2-3 ■ Canon NDPS Gateway The Canon NDPS Gateway software configures Canon printers to operate in the Novell NetWare NDPS (Novell Distributed Print Services) architecture. ENGLISH NOTE • For the detailed installation procedures, refer to the PDF manuals and readme.txt files in each program folder on the CD-ROM. • The PDF manuals may differ depending on which FAX-L2000/L2000IP machine you have. Refer to the PDF manuals specifically for your machine. System Requirements The CD-ROM is designed for use with Windows 95/98/Me, Windows NT or Windows 2000/XP computers. 2-4 About the User’s CD-ROM Software Installing the Software ENGLISH Before printing, you need to install the printer drivers and utility software. When you install the software, take care to install the correct version of the software that is compatible with the operating system of your computer. IMPORTANT For details on the printer drivers and the installation of the software, see Chapter 2, “Getting Started,” in the PCL Driver Guide. For Windows To print from a Windows 95/98/Me/2000/XP or Windows NT computer, install the printer driver and utility software from the supplied CD-ROM. The following software is included on the supplied CD-ROM. ■ PCL Printer Driver This is essential software if you want to print from Windows based applications. Be sure to install this software. ■ NetSpot This printer utility software enables you to display the status of a printer that is connected to a computer or network on your computer screen. If you set up the printer and Network Kit, you can operate the printer from the connected computer in the same way as you would operate the printer from the operation panel. Install this software if necessary. When the Machine Is Connected to a Network Install the supplied “NetSpot” network administration software. NOTE • When this machine is connected to a network, you need to set up the network’s operating system (NetWare, UNIX, etc.), and the optional Network Kit. For these settings, see Chapter 1, “Before You Start,” in the Network Guide. • When this machine is connected to a network, print the “PRINT EN CONFIG” list from the TEST MENU to check the MAC address of the Network Kit. Then, set up the network OS (NetWare, UNIX, etc.), and the Network Kit. For details, see Chapter 3, “Summary of the Printer Menus,” in the PCL Printer Guide. Installing the Software 2-5 Software Installation Instructions This section describes how to install the printer driver, fax driver, and other software included on the accompanying CD-ROM. ENGLISH NOTE • For details on installing the printer driver, see Chapter 2, “Getting Started,” in the PCL Driver Guide. • For details on installing the fax driver, see Chapter 2, “Getting Started,” in the Fax Driver Guide. Installing the PCL Printer Driver IMPORTANT For Windows NT or Windows 2000, log on to as Administrator when you install the driver. Using the Installer 1 Insert the Driver Software CD-ROM into the CD-ROM drive. ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the following folders: [Drivers] ➞ [uk_eng] ➞ [prnsetup]. ❑ Double-click the [Setup.exe] icon to start the installation process. 2 Follow the on screen instructions to finish installing the printer driver. Using the Add Printer Wizard 1 2 3 2-6 On the [Start] menu, point to [Settings] ➞ click [Printers]. In the [Printers] folder, double-click the [Add Printer] icon to start the Add Printer Wizard ➞ follow the instructions on the screen to continue the installation. Insert the Driver Software CD-ROM into the CD-ROM drive ➞ click [Have Disk]. Software Installation Instructions 4 Click [Browse] to select the folder of the driver you want to install ➞ click [OK]. You can select the driver from the following folders on the CD-ROM. •PCL5e OS Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Path \Drivers\uk_eng\printer\pcl5e_5c\win9x_me \Drivers\uk_eng\printer\pcl5e_5c\winnt40 \Drivers\uk_eng\printer\pcl5e_5c\win2k_xp OS Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 5 6 ENGLISH •PCL6 Path \Drivers\uk_eng\printer\pcl6\win9x_me \Drivers\uk_eng\printer\pcl6\winnt40 \Drivers\uk_eng\printer\pcl6\win2k_xp Select your printer model from [Printers] ➞ click [Next]. Follow the instructions on the screen to continue ➞ click [Finish] to start copying the files. Software Installation Instructions 2-7 Installing Canon Font Manager 1 Insert the Driver Software CD-ROM into the CD-ROM drive. ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the [Canonfm] folder ➞ [English] folder. ❑ Double-click the [Setup.exe] icon to start the installation process. ENGLISH 2 Follow the on screen instructions to finish installing Canon Font Manager. Installing the NetSpot You can install NetSpot from the Network User Software CD. For instructions on how to install NetSpot, see the NetSpot Quick Start Guide on the same CD. v Installing the LPR Port Utility 1 Insert the Network User Software CD-ROM into the CD-ROM drive. ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the [Lprport] folder. ❑ Double-click the [Setup.exe] icon to start the installation process. 2 2-8 Follow the on screen instructions to finish installing the LPR Port Utility. Software Installation Instructions Installing the NetBIOS/NetBEUI Port Monitor 1 Insert the Network User Software CD into the CD-ROM drive. ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the [Portmon] folder. ❑ Double-click the [Setup.exe] icon to start the installation process. Follow the on screen instructions to finish installing the NetBIOS/NetBEUI Port Monitor. ENGLISH 2 Installing DSE (Device Status Extension) 1 Insert the Network User Software CD into the CD-ROM drive. n ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the [DSE] folder ➞ select [Win2000] or [WinXP] ➞ click [english] folder. ❑ Double-click the [Setup.exe] icon to start the installation process. 2 Follow the on screen instructions to finish installing DSE. Installing the NDPS Gateway You can install NDPS Gateway from the Network User Software CD. For instructions on how to install NDPS Gateway, see the NDPS Gateway User’s Guide on the same CD. Software Installation Instructions 2-9 Installing the Fax Driver IMPORTANT For Windows NT or Windows 2000, log on to as Administrator when you install the driver. Using the Installer ENGLISH 1 Insert the Driver Software CD-ROM into the CD-ROM drive. ❑ Double-click the [My Computer] icon ➞ the CD-ROM drive icon. ❑ Double-click the following folders: [Fax_Driver] ➞ [uk_eng] ➞ [faxsetup]. ❑ Double-click the [Setup.exe] icon to start the installation process. 2 Follow the on screen instructions to finish installing the fax driver. Using the Add Printer Wizard for Windows 1 2 3 4 On the [Start] menu, point to [Settings] ➞ click [Printers]. In the [Printers] folder, double-click the [Add Printer] icon to start the Add Printer Wizard ➞ follow the instructions on the screen to continue the installation. Insert the Driver Software CD-ROM into the CD-ROM drive ➞ click the [Have Disk]. Click [Browse] to select the folder of your driver you want to install ➞ click [OK]. You can select the driver from the following folders on the CD-ROM. OS Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 5 6 2-10 Path \Fax_Drivers\uk_eng\fax\win9x_me \Fax_Drivers\uk_eng\fax\winnt40 \Fax_Drivers\uk_eng\fax\win2k_xp Select your fax model from [Printers] ➞ click [Next]. Follow the instructions on the screen to continue ➞ click [Finish] to start copying the files. Software Installation Instructions FAX-L2000/L2000IP Guide d'installation Guide du télécopieur Les guides de ce télécopieur sont les suivants. Consultez-les pour obtenir des informations détaillées. Les guides fournis avec l’équipement en option sont inclus dans la liste ci-dessous. Selon la configuration du système et le type de télécopieur, certains guides peuvent être inutiles. Les guides signalés par ce symbole sont imprimés sur papier. • Principes d’utilisation • Dépannage FRANÇAIS • Principes d’utilisation de la fonction d’envoi • Principes de télécopie • Configuration de la connexion au réseau et installation du logiciel du CD-ROM • Utilisation de l’interface utilisateur distante • Connexion et configuration du réseau • Utilisation de la fonction d’impression • Installation et utilisation du pilote d’imprimante PCL • Installation et utilisation du pilote de télécopie et de Editeur de page de garde L’illustration de la couverture peut différer légèrement de votre télécopieur. CD-ROM Les guides signalés par ce symbole sont des manuels au format PDF inclus sur les CD-ROM fournis. Guide de référence Guide de la fonction envoi Guide de la fonction télécopie Guide d'installation (Le présent document) CD-ROM CD-ROM CD-ROM CD-ROM Guide du logiciel d’administration CD-ROM Guide de mise en réseau CD-ROM Guide de l’impression PCL CD-ROM Guide du pilote PCL CD-ROM Guide du pilote de télécopie et de Cover Sheet Editor CD-ROM Plan du présent guide Connexion du télécopieur à un réseau Chapitre 2 Installation des logiciels FRANÇAIS Chapitre 1 Des efforts considérables ont été mis en œuvre pour que ce guide soit exempt d’erreur et d’omission. Néanmoins, comme nous améliorons constamment nos produit, n’hésitez pas à contacter Canon pour obtenir une spécification précise. Contents Préface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi Présentation du guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Conventions adoptées . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Illustrations utilisées dans ce guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Abréviations utilisées dans le présent guide . . . . . . . . . . . . . . . . . . . . . . . . . . vii Marques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Chapitre 1 Connexion du télécopieur à un réseau FRANÇAIS Configuration de la connexion au réseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Diagramme des réglages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Connexions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion à un réseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion à un réseau 100Base-TX . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion à un réseau 10Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion via une interface parallèle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion à un ordinateur Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion via une interface USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connexion à un ordinateur Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapitre 2 1-3 1-3 1-4 1-5 1-6 1-6 1-7 1-7 Installation des logiciels A propos des logiciels du CD-ROM utilisateur . . . . . . . . . . . . . . . . . . . . . . . . Contenu du CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network User Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration requise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 2-2 2-3 2-4 Installation des logiciels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Pour Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Si le télécopieur est connectée à un réseau . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Instructions d'installation des logiciels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation du pilote d'imprimante PCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utilisation du programme d'installation . . . . . . . . . . . . . . . . . . . . . . . . . . Utilisation de l'Assistant Ajout d'imprimante . . . . . . . . . . . . . . . . . . . . . . Installation de Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation de NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation de l'utilitaire de port LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation du moniteur de port NetBIOS/NetBEUI . . . . . . . . . . . . . . . . . . . . Installation de DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . iv 2-6 2-6 2-6 2-6 2-8 2-8 2-8 2-9 2-9 FRANÇAIS Installation de NDPS Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installation du pilote de télécopie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Utilisation du programme d'installation . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Utilisation de l'Assistant Ajout d'imprimante pour Windows . . . . . . . . . .2-10 v Préface Nous vous remercions d’avoir porté votre choix sur le télécopieur FAX-L2000/L2000IP de Canon. Nous vous invitons à lire intégralement le présent guide avant de manipuler le télécopieur afin de vous familiariser avec ses fonctions et de tirer le meilleur parti de ses avantages. Une fois la lecture terminée, rangez le guide dans un endroit sûr pour pouvoir le consulter en cas de besoin. Présentation du guide FRANÇAIS Conventions adoptées Les symboles ci-dessous sont utilisés dans ce guide pour attirer votre attention sur des procédures, des restrictions, des précautions d’emploi ainsi que des consignes de sécurité à observer. I AVERTISSEMENT Signale la présence d’opérations devant être exécutées correctement sous peine de provoquer des blessures corporelles graves ou mortelles. Pour utiliser le télécopieur en toute sécurité, respectez toujours ces avertissements. ATTENTION IMPORTANT REMARQUE vi Signale la présence d’opérations devant être exécutées correctement sous peine de provoquer des blessures corporelles ou d’endommager du matériel. Pour utiliser le télécopieur en toute sécurité, respectez toujours ces recommandations. Signale des exigences ou des restrictions fonctionnelles. Lisez attentivement ces instructions pour utiliser correctement le télécopieur et éviter de l’endommager. Clarifie une opération ou fournit des informations complémentaires sur une procédure. Nous vous conseillons vivement de lire ces instructions. Illustrations utilisées dans ce guide FRANÇAIS Sauf indication contraire, les illustrations contenues dans ce guide sont celles d’une télécopieur FAX-L2000/L2000IP dépourvue d’équipement en option. Abréviations utilisées dans le présent guide Dans ce guide, les noms de produit et de modèle sont abrégés de la manière suivante : Système d'exploitation Microsoft® Windows® 95 : Système d'exploitation Microsoft® Windows® 98 : Système d'exploitation Microsoft® Windows® Edition Millenium : Système d'exploitation Microsoft® Windows NT® : Système d'exploitation Microsoft® Windows® 2000 : Système d'exploitation Microsoft® Windows® XP : Système d'exploitation Microsoft® Windows® : Novell NetWare® : Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows NetWare vii Marques Adobe et Acrobat Reader sont des marques d'Adobe Systems Incorporated. Canon, le logo Canon, FAX-L2000/L2000IP et NetSpot sont des marques de Canon Inc. Microsoft, Windows et Windows NT sont des marques déposées de Microsoft Corporation aux Etats-Unis et dans d'autres pays. Wingdings est une marque de Microsoft Corporation. NetWare et Novell sont des marques déposées de Novell Inc. Novell Distributed Print Service et NDPS sont des marques de Novell Inc. PCL, PCL 5e et PCL 6 sont des marques de Hewlett-Packard Company. UNIX est une marque déposée et fournie exclusivement sous licence par X/Open Company, Ltd., aux Etats-Unis et dans d'autres pays. FRANÇAIS Les autres noms de produit et de société mentionnés dans ce guide peuvent être des marques de leurs propriétaires respectifs. Copyright Copyright 2003, Canon Inc. Tous droits réservés. Aucune partie de ce document ne peut être reproduite ou transmise sous une forme ou un moyen quelconque, électronique ou mécanique, y compris la photocopie et l'enregistrement, ou par un système de récupération ou de stockage d'informations, sans le consentement écrit préalable de Canon Inc. viii Connexion du télécopieur à un réseau 1 CHAPITRE Ce chapitre explique comment raccorder le télécopieur à un ordinateur ou un réseau pour pouvoir imprimer à partir de celle-ci. Configuration de la connexion au réseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 FRANÇAIS Diagramme des réglages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Connexions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Connexion à un réseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Connexion via une interface parallèle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 Connexion via une interface USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 1-1 Configuration de la connexion au réseau Cette section explique comment connecter le télécopieur à un ordinateur personnel ou un réseau et décrit les types de connecteurs et de câbles à utiliser. Diagramme des réglages Etablissement de la connexion FRANÇAIS Raccordez les câbles correspondant à l'environnement utilisé. (Voir pages 1-3 à 1-7.) Utilisation du câble d'interface Connexion à un réseau Réglages d'environnement Saisissez la date, l'heure et les réglages administrateur système nécessaires aux opérations de gestion. (Voir le Chapitre 1 «Avant de commencer à utiliser le télécopieur» du Guide de la fonction télécopie et le Chapitre 4 «Restriction de l'utilisation du télécopieur» du Guide de référence.) Réglages du réseau Saisissez les réglages appropriés au réseau et au serveur. (Voir le Chapitre 2 «Utilisation d'un réseau TCP/IP (Windows/UNIX)» du Guide de mise en réseau.) Installation du pilote d'imprimante Installez le pilote d'imprimante sur les ordinateurs personnels et tout utilitaire approprié à l'environnement réseau utilisé. (Voir le Chapitre 2 «Prise en main» du Guide du pilote PCL.) 1-2 Configuration de la connexion au réseau Connexions Raccordez l'imprimante à un ordinateur ou un réseau avec un câble d'interface permettant la communication bidirectionnelle ou un câble Ethernet 100Base-TX ou 10Base-T. AVERTISSEMENT REMARQUE Le câble d'interface ou le câble réseau n'est pas fourni avec ce télécopieur. Il doit être acheté séparément en fonction de l'ordinateur ou du réseau. Connexion à un réseau Ce télécopieur est équipée d'un serveur d'impression intégré compatible avec un réseau TCP/IP, permettant de l'utiliser comme imprimante de réseau sous UNIX et Windows. Le serveur d'impression est équipé d'un port 100Base-TX/10Base-T, pour la connexion à un réseau local. Les exemples de connexion figurant dans cette section expliquent comment connecter le télécopieur à un réseau, selon le type de réseau local. IMPORTANT Pour connecter le télécopieur à votre réseau, vous avez besoin d'un câble LAN, d'un concentrateur et du Kit Réseau Imprimante/Fax pour FAX-L2000. REMARQUE • Le serveur d'impression de ce télécopieur est compatible avec le réseau NetWare. Pour plus d'informations, consultez le représentant Canon agréé local. • Le serveur d'impression de ce télécopieur détecte automatiquement l'interface 100Base-TX ou 10Base-T connectée. • Après la connexion du câble réseau, exécutez les procédures suivantes. Pour plus d'informations sur chaque procédure, consultez le manuel correspondant. - Installation du pilote d'imprimante. (Voir le Chapitre 2 «Prise en main» du Guide du pilote PCL.) - Réglage de la date et de l'heure et du mode de gestion du système. (Voir le Chapitre 1 «Avant de commencer à utiliser le télécopieur» du Guide de la fonction télécopie et le Chapitre 4 «Restriction de l'utilisation du télécopieur» du Guide de référence.) Connexions 1-3 FRANÇAIS Pour éviter tout risque d'électrocution, débranchez le cordon d'alimentation de la prise secteur avant de connecter un câble d'interface ou un câble réseau. (Voir le Chapitre 1 «Avant de commencer à utiliser le télécopieur» du Guide de référence.) - Paramètres du serveur d'impression et du réseau. (Voir le Chapitre 2 «Utilisation d'un réseau TCP/IP (Windows/UNIX)» du Guide de mise en réseau.) Connexion à un réseau 100Base-TX Connectez le câble 10Base-T/100Base-TX au port du concentrateur à l’aide d’un câble LAN à paire torsadée Catégorie 5 pour le réseau 100Base-TX. Ensuite, connectez le câble 10Base-T/100Base-TX au Kit réseau en option au dos du télécopieur FAX-L2000/L2000IP. Si l’ordinateur n’est pas compatible avec le réseau 100Base-TX, une carte réseau 100Base-TX peut être nécessaire. FRANÇAIS Ordinateur avec port 100Base-TX Ordinateur sans port 100Base-TX Carte LAN 100Base-TX Câble 100Base-TX Concentrateur 100Base-TX Port 10Base-T/100Base-TX REMARQUE Le concentrateur, le câble LAN et le Kit réseau connectés au réseau local doivent être compatibles avec le réseau 100Base-TX. Pour plus d’informations, consultez le représentant Canon agréé local. 1-4 Connexions Connexion à un réseau 10Base-T Connectez le câble 10Base-T/100Base-TX au port du concentrateur à l’aide d’un câble LAN à paire torsadée Catégorie 3 ou supérieure pour le réseau 10Base-T. Ensuite, connectez le câble 10Base-T/100Base-TX au Kit réseau en option au dos du télécopieur FAX-L2000/L2000IP. Si l’ordinateur n’est pas compatible avec le réseau 10Base-T, une carte réseau 10Base-T peut être nécessaire. Ordinateur sans port 10Base-T FRANÇAIS Ordinateur avec port 10Base-T Carte LAN 10Base-T Câble 10Base-T Concentrateur 10Base-T Port 10Base-T/100Base-TX REMARQUE Le concentrateur, le câble LAN et le Kit réseau connectés au réseau local doivent être compatibles avec le réseau 10Base-T. Pour plus d’informations, consultez le représentant Canon agréé local. Connexions 1-5 Connexion via une interface parallèle Ce télécopieur peut être connectée à un ordinateur via une interface parallèle. Une fois la connexion établie, installez le pilote d’imprimante et les logiciels utilitaires fournis pour le système d’exploitation de l’ordinateur. Pour plus d’informations sur l’installation du pilote d’imprimante et des logiciels utilitaires, voir «Instructions d'installation des logiciels,» à la page 2-6. Connexion à un ordinateur Windows FRANÇAIS Le port imprimante des ordinateurs IBM PC/AT et compatibles Windows est normalement un port parallèle (conforme IEEE 1284). Connectez le câble d’imprimante parallèle au dos du télécopieur FAX-L2000/L2000IP et au port imprimante de l’ordinateur. Logiciel du pilote d’imprimante Câble imprimante Port parallèle* Port imprimante un câble Centronics 36 broches. * Brancher Verrouiller les clips des deux côtés. IMPORTANT Si le port parallèle du télécopieur est connecté à un ordinateur, certains logiciels utilitaires seront inutilisables. Pour plus d’informations, consultez le représentant Canon agréé local. 1-6 Connexions Connexion via une interface USB Ce télécopieur peut être connectée à un ordinateur via une interface USB. Une fois la connexion établie, installez le pilote d’imprimante et les logiciels utilitaires fournis pour le système d’exploitation de l’ordinateur. Pour plus d’informations sur l’installation du pilote d’imprimante et des logiciels utilitaires, voir «Instructions d'installation des logiciels,» à la page 2-6. Connexion à un ordinateur Windows Connectez le câble USB au dos du télécopieur FAX-L2000/L2000IP et au port USB de l’ordinateur. FRANÇAIS Logiciel du pilote d’imprimante Câble USB Port USB Port USB IMPORTANT Si le port USB du télécopieur est connecté à un ordinateur, certains logiciels utilitaires seront inutilisables. Pour plus d’informations, consultez le représentant Canon agréé local. Connexions 1-7 FRANÇAIS 1-8 Connexions Installation des logiciels 2 CHAPITRE Ce chapitre explique comment installer les logiciels contenus sur le CD-ROM des logiciels utilisateur fourni avec le télécopieur. A propos des logiciels du CD-ROM utilisateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 FRANÇAIS Contenu du CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Configuration requise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Installation des logiciels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Pour Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Si le télécopieur est connectée à un réseau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Instructions d'installation des logiciels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Installation du pilote d'imprimante PCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 Installation de Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installation de NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installation de l'utilitaire de port LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installation du moniteur de port NetBIOS/NetBEUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installation de DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installation de NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installation du pilote de télécopie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 2-1 A propos des logiciels du CD-ROM utilisateur Cette section donne la liste du contenu du CD-ROM et un guide condensé des logiciels à installer. Contenu du CD-ROM Le CD-ROM contient les logiciels et documents suivants : FRANÇAIS Driver Software ■ Acrobat Reader Installez ce logiciel pour consulter les guides en ligne. ■ Guide de l'impression PCL Ce manuel PDF contient des instructions relatives à l'imprimante PCL. ■ Guide du pilote PCL Ce manuel PDF contient des instructions relatives au pilote d'imprimante PCL et à son installation. ■ Guide du pilote de télécopie avec Cover Sheet Editor Ce manuel PDF contient des instructions relatives au pilote de télécopie PCL et à Cover Sheet Editor ainsi qu'à leur installation. ■ Pilote d'imprimante PCL Logiciel indispensable pour imprimer à partir des applications Windows. N'oubliez pas de l'installer. ■ Pilote de télécopie Installez ce logiciel pour pouvoir utiliser la fonction télécopie. ■ Font Manager 2000 Installez ce logiciel pour utiliser les 96 polices d'écran fournies sur le CD-ROM. ■ Code à barre et OCR TTF Installez ces polices pour pouvoir les afficher correctement. 2-2 A propos des logiciels du CD-ROM utilisateur REMARQUE • Pour obtenir des informations détaillées sur les procédures d'installation, consultez les manuels PDF et les fichiers readme.txt de chaque dossier programme du CD-ROM. • Les manuels PDF peuvent varier en fonction du modèle de télécopieur FAX-L2000/ L2000IP que vous possédez. Consultez les manuels PDF appropriés à votre télécopieur. • Pour accéder au menu du CD-ROM, insérez le Driver Software CD d'imprimante dans votre lecteur de CD-ROM ➞ cliquez deux fois sur [FAXL2000.EXE]. Network User Software ■ Acrobat Reader Installez ce logiciel pour consulter les guides en ligne. ■ Guide de mise en réseau (avec Kit réseau Canon en option) FRANÇAIS Ce manuel PDF fournit des informations détaillées sur la manière de raccorder le Kit réseau en option à votre réseau. ■ Guide du logiciel d'administration Ce manuel PDF fournit des informations détaillées sur la manière de contrôler le télécopieur via un navigateur Web. ■ Guide d'installation Ce manuel PDF (le présent document) fournit des informations détaillées sur la manière de raccorder le télécopieur à un réseau et de configurer l'environnement réseau. ■ NetSpot Ce logiciel permet d'afficher sur l'écran de l'ordinateur le statut de n'importe quelle télécopieur connectée à un ordinateur ou à un réseau. Ce logiciel s'applique aux ordinateurs Windows, Macintosh et UNIX. ■ Utilitaire de port LPR L'utilitaire de port LPR pour Microsoft Windows 95/98/Me est le logiciel qui permet d'imprimer à partir d'ordinateurs Windows 95/98/Me vers des imprimantes connectées à un réseau TCP/IP. ■ Utilitaire de surveillance de port NetBIOS/NetBEUI L'utilitaire de surveillance de port NetBIOS/NetBEUI pour Microsoft Windows 95/98/Me est le logiciel qui permet d'imprimer à partir d'ordinateurs Windows 95/98/Me vers des imprimantes connectées à un réseau NetBIOS/NetBEUI. ■ DSE (Device Status Extension) DSE est le logiciel qui permet de rechercher des informations stockées sur des imprimantes partagées et de gérer des tâches d'impression via un navigateur Web. A propos des logiciels du CD-ROM utilisateur 2-3 ■ Canon NDPS Gateway Le logiciel Canon NDPS Gateway configure des imprimantes Canon pour fonctionner dans l'architecture Novell NetWare NDPS (Novell Distributed Print Services). REMARQUE • Pour obtenir des informations détaillées sur les procédures d'installation, consultez les manuels PDF et les fichiers readme.txt de chaque dossier programme du CD-ROM. • Les manuels PDF peuvent varier en fonction du modèle de télécopieur FAX-L2000/ L2000IP que vous possédez. Consultez les manuels PDF appropriés à votre télécopieur. Configuration requise FRANÇAIS Le CD-ROM est conçu pour être utilisé avec des ordinateurs Windows 95/98/Me, Windows NT ou Windows 2000/XP. 2-4 A propos des logiciels du CD-ROM utilisateur Installation des logiciels Avant d'imprimer, vous devez installer les pilotes d'imprimante et les logiciels utilitaires. Quand vous installez les logiciels, veillez à sélectionner la version compatible avec le système d'exploitation de votre ordinateur. Pour Windows Pour imprimer à partir d'un ordinateur Windows 95/98/Me/2000/XP ou Windows NT, installez le pilote d'imprimante et les logiciels utilitaires contenus sur le CD-ROM fourni. Le CD-ROM contient les logiciels suivants. ■ Pilote d'imprimante PCL Logiciel indispensable pour imprimer à partir des applications Windows. N'oubliez pas de l'installer. ■ NetSpot Cet utilitaire d'impression permet d'afficher sur l'écran de l'ordinateur le statut d'une imprimante connectée à un ordinateur ou à un réseau. Si vous configurez l'imprimante et le Kit réseau, vous pouvez commander l'imprimante à partir de l'ordinateur auquel elle est raccordée de la même manière qu'à partir de son panneau de commande. Installez ce logiciel le cas échéant. Si le télécopieur est connectée à un réseau Installez le logiciel d'administration réseau «NetSpot» fourni. REMARQUE • Si le télécopieur est connectée à un réseau, vous devez installer le système d'exploitation réseau (NetWare, UNIX, etc.) ainsi que le Kit réseau en option. Pour plus d'informations, voir le Chapitre 1 «Avant de commencer» du Guide de mise en réseau. • Si le télécopieur est connectée à un réseau, imprimez la liste «PAGE EN CONFIG.» du MENU TEST pour vérifier l'adresse MAC du Kit réseau. Ensuite, installez le système d'exploitation réseau (NetWare, UNIX, etc.) et le Kit réseau. Pour plus d'informations, voir le Chapitre 3 «Résumé des menus de l'imprimante» du Guide de l'impression PCL. Installation des logiciels 2-5 FRANÇAIS IMPORTANT Pour plus d'informations sur les pilotes d'imprimante et l'installation des logiciels, voir le Chapitre 2 «Prise en main» du Guide du pilote PCL. Instructions d'installation des logiciels Cette section décrit comment installer le pilote d'imprimante, le pilote de télécopie ainsi que d'autres logiciels contenus sur le CD-ROM fourni avec le télécopieur. FRANÇAIS REMARQUE • Pour plus d'informations sur l'installation du pilote d'imprimante, voir le Chapitre 2 «Prise en main» du Guide du pilote PCL. • Pour plus d'informations sur l'installation du pilote de télécopie, voir le Chapitre 2 «Prise en main» du Guide du pilote de télécopie. Installation du pilote d'imprimante PCL IMPORTANT Sous Windows NT ou Windows 2000, connectez-vous en tant qu'administrateur pour installer le pilote. Utilisation du programme d'installation 1 Insérez le CD-ROM du logiciel du pilote dans le lecteur de CD-ROM. ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur les dossiers suivants : [Pilotes] ➞ [francais] ➞ [prnsetup]. ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. 2 Suivez les instructions à l'écran pour terminer l'installation du pilote d'imprimante. Utilisation de l'Assistant Ajout d'imprimante 1 2-6 Dans le menu [Démarrer], pointez sur [Paramètres] ➞ cliquez sur [Imprimantes]. Instructions d'installation des logiciels 2 3 4 Dans le dossier [Imprimantes], cliquez deux fois sur l'icône [Ajout d'imprimante] pour démarrer l'Assistant Ajout d'imprimante ➞ suivez les instructions à l'écran pour poursuivre l'installation. Insérez le CD-ROM du logiciel du pilote d'imprimante dans le lecteur de CD-ROM ➞ cliquez sur [Disquette fournie]. Cliquez sur [Parcourir] pour sélectionner le dossier du pilote à installer ➞ cliquez sur [OK]. Vous pouvez sélectionner le pilote à partir des dossiers suivants sur le CD-ROM. •PCL5e Chemin d'accès \Drivers\francais\printer\pcl5e_5c\win9x_me \Drivers\francais\printer\pcl5e_5c\winnt40 \Drivers\francais\printer\pcl5e_5c\win2k_xp FRANÇAIS Système d'exploitation Windows 95/98/Me Windows NT 4.0 Windows 2000/XP •PCL6 Système d'exploitation Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 5 6 Chemin d'accès \Drivers\francais\printer\pcl6\win9x_me \Drivers\francais\printer\pcl6\winnt40 \Drivers\francais\printer\pcl6\win2k_xp Sélectionnez votre modèle d'imprimante sous [Imprimantes] ➞ cliquez sur [Suivant]. Suivez les instructions à l'écran pour continuer ➞ cliquez sur [Terminer] pour commencer à copier les fichiers. Instructions d'installation des logiciels 2-7 Installation de Canon Font Manager 1 Insérez le Driver Software CD dans le lecteur de CD-ROM. ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur le dossier [Canonfm] ➞ dossier [francais]. ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. 2 Suivez les instructions à l'écran pour terminer l'installation de Canon Font Manager. FRANÇAIS Installation de NetSpot Vous pouvez installer NetSpot à partir du Network User Software CD. Pour plus d'informations sur la procédure d'installation de NetSpot, consultez le Guide de démarrage rapide de NetSpot sur le même CD. v Installation de l'utilitaire de port LPR 1 Insérez le Network User Software CD dans le lecteur de CD-ROM. ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur le dossier [Lprport]. ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. 2 2-8 Suivez les instructions à l'écran pour terminer l'installation de l'utilitaire de port LPR. Instructions d'installation des logiciels Installation du moniteur de port NetBIOS/NetBEUI 1 Insérez le Network User Software CD dans le lecteur de CD-ROM. ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur le dossier [Portmon]. ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. Suivez les instructions à l'écran pour terminer l'installation du moniteur de port NetBIOS/NetBEUI. FRANÇAIS 2 Installation de DSE (Device Status Extension) 1 Insérez le Network User Software CD dans le lecteur de CD-ROM. n ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur le dossier [DSE] ➞ sélectionnez [Win2000] ou [WinXP] ➞ cliquez sur le dossier [francais]. ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. 2 Suivez les instructions à l'écran pour terminer l'installation de DSE. Installation de NDPS Gateway Vous pouvez installer NDPS Gateway à partir du Network User Software CD. Pour plus d'informations sur la procédure d'installation de NDPS Gateway, consultez le Guide de l'utilisateur de NDPS Gateway sur le même CD. Instructions d'installation des logiciels 2-9 Installation du pilote de télécopie IMPORTANT Sous Windows NT ou Windows 2000, connectez-vous en tant qu'administrateur pour installer le pilote. Utilisation du programme d'installation 1 Insérez le Driver Software CD dans le lecteur de CD-ROM. ❑ Cliquez deux fois sur l'icône [Poste de travail] ➞ icône du lecteur de CD-ROM. ❑ Cliquez deux fois sur les dossiers suivants : [Fax_Driver] ➞ [francais] ➞ [faxsetup]. FRANÇAIS ❑ Cliquez deux fois sur l'icône [Setup.exe] pour démarrer le processus d'installation. 2 Suivez les instructions à l'écran pour terminer l'installation du pilote de télécopie. Utilisation de l'Assistant Ajout d'imprimante pour Windows 1 2 3 4 Dans le menu [Démarrer], pointez sur [Paramètres] ➞ cliquez sur [Imprimantes]. Dans le dossier [Imprimantes], cliquez deux fois sur l'icône [Ajout d'imprimante] pour démarrer l'Assistant Ajout d'imprimante ➞ suivez les instructions à l'écran pour poursuivre l'installation. Insérez le Driver Software CD dans le lecteur de CD-ROM ➞ cliquez sur [Disquette fournie]. Cliquez sur [Parcourir] pour sélectionner le dossier du pilote à installer ➞ cliquez sur [OK]. Vous pouvez sélectionner le pilote à partir des dossiers suivants sur le CD-ROM. Système d'exploitation Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 2-10 Instructions d'installation des logiciels Chemin d'accès \Fax_Drivers\francais\fax\win9x_me \Fax_Drivers\francais\fax\winnt40 \Fax_Drivers\francais\fax\win2k_xp 6 Sélectionnez votre modèle de télécopieur sous [Imprimantes] ➞ cliquez sur [Suivant]. Suivez les instructions à l'écran pour continuer ➞ cliquez sur [Terminer] pour commencer à copier les fichiers. FRANÇAIS 5 Instructions d'installation des logiciels 2-11 FRANÇAIS 2-12 Instructions d'installation des logiciels FAX-L2000/L2000IP Setuphandbuch Handbücher für das Gerät Zu diesem Gerät gibt es die folgenden Handbücher. Bitte schlagen Sie zu den jeweiligen Themen dort nach. Die mit Optionen gelieferten Handbücher sind in der untenstehenden Liste enthalten. Je nach Systemkonfiguration und erworbenem Produkt werden gewisse Handbücher unter Umständen nicht gebraucht. Handbücher mit diesem Symbol liegen in gebundener Form vor. • Grundlegende Bedienung • Störungsbeseitigung • Sendefunktionen und ihre Programmierung DEUTSCH • Faxfunktionen und ihre Programmierung • Informationen zum Einrichten der Netzwerkverbindung und Installieren der Software auf der CD-ROM • Funktionen des Remote UI und ihre Programmierung • Anweisungen zum Einbinden und Einrichten in einem Netzwerk • Anweisungen zur Verwendung des PCL Druckers • Anweisungen zur Installation und Verwendung des PCL Druckertreibers • Anweisungen zur Installation und Verwendung des Faxtreibers mit Cover Sheet Editor CD-ROM Handbücher mit diesem Symbol sind in Form von PDF-Dateien auf der mitgelieferten CD-ROM enthalten. Referenzhandbuch Handbuch Sendefunktionen Faxhandbuch Setuphandbuch (Dieses Dokument) CD-ROM CD-ROM CD-ROM CD-ROM Handbuch Remote UI CD-ROM Netzwerkhandbuch CD-ROM PCL Druckerhandbuch CD-ROM Handbuch zum PCL-Druckertreiber CD-ROM Handbuch zum Faxtreiber mit Cover Sheet Editor CD-ROM Die Abbildung des Geräts auf dem Titel kann geringfügig vom Aussehen Ihres Modells abweichen. Aufbau dieses Handbuchs Verbinden des Geräts mit einem Netzwerk Kapitel 2 Installieren von Software DEUTSCH Kapitel 1 Es wurden große Anstrengungen unternommen, Fehler und Auslassungen in diesem Handbuch zu vermeiden. Die stetige Produktverbesserung kann jedoch Abweichungen mit sich bringen. Wenn Sie eine genaue Angabe benötigen, setzen Sie sich bitte mit Canon in Verbindung. Contents Vorwort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi Konventionen in diesem Handbuch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Verwendete Symbole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi IIlustrationen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Abkürzungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warenzeichen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Copyright-Vermerk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Kapitel 1 Verbinden des Geräts mit einem Netzwerk Einrichten der Netzwerkverbindung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Übersicht über die Einstellungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 DEUTSCH Anschlüsse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anschließen an ein Netzwerk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verbinden mit einem 100Base-TX-Netzwerk . . . . . . . . . . . . . . . . . . . . . . Verbinden mit einem 10Base-T-Netzwerk . . . . . . . . . . . . . . . . . . . . . . . . Verbinden über eine parallele Schnittstelle . . . . . . . . . . . . . . . . . . . . . . . . . . Verbinden mit einem Windows-Computer . . . . . . . . . . . . . . . . . . . . . . . . Verbinden über eine USB-Schnittstelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verbinden mit einem Windows-Computer . . . . . . . . . . . . . . . . . . . . . . . . Kapitel 2 1-3 1-3 1-4 1-5 1-6 1-6 1-7 1-7 Installieren von Software Informationen über die Software auf der CD-ROM . . . . . . . . . . . . . . . . . . . . . Inhalt der CD-ROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network User Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Systemanforderungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 2-2 2-3 2-4 Installieren der Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Für Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Bei Anschluß des Geräts an einem Netzwerk . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Software-Installationsanweisungen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Installieren des PCL Druckertreibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Unter Verwendung des Installationsprogramms . . . . . . . . . . . . . . . . . . . 2-7 Unter Verwendung des Assistenten für die Druckerinstallation . . . . . . . . 2-8 Installieren von Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Installieren von NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Installieren von LPR Port Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Installieren von NetBIOS/NetBEUI Port Monitor . . . . . . . . . . . . . . . . . . . . . 2-10 Installieren von DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . 2-10 iv DEUTSCH Installieren des NDPS Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Installieren des Faxtreibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11 Unter Verwendung des Installationsprogramms . . . . . . . . . . . . . . . . . . .2-11 Unter Verwendung des Assistenten für die Druckerinstallation (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11 v Vorwort Zunächst einmal vielen Dank für den Kauf des Canon FAX-L2000/L2000IP. Bitte lesen Sie dieses Handbuch vor Gebrauch des Geräts aufmerksam durch, um sich einen Überblick über seine Fähigkeiten zu verschaffen und mit seinen Funktionen vertraut zu werden. Bewahren Sie das Handbuch dann zum Nachschlagen an einem sicheren Ort auf. Konventionen in diesem Handbuch Verwendete Symbole Die folgenden Symbole kennzeichnen Vorgänge, Einschränkungen, Vorsichtsmaßnahmen und Anweisungen, die aus Sicherheitsgründen zu beachten sind. DEUTSCH I WARNUNG Identifiziert Warnhinweise, die Vorgänge betreffen, welche bei unvorschriftsmäßiger Durchführung eine Verletzung oder den Tod zur Folge haben können. Bitte beachten Sie diese Warnungen unbedingt, um den sicheren Betrieb des Geräts zu gewährleisten. ACHTUNG Identifiziert Vorsichtshinweise, die Vorgänge betreffen, welche bei unvorschriftsmäßiger Durchführung eine Verletzung oder einen Sachschaden zur Folge haben können. Bitte beachten Sie diese Vorsichtshinweise unbedingt, um den sicheren Betrieb des Geräts zu gewährleisten. WICHTIG HINWEIS vi Kennzeichnet Betriebsvoraussetzungen und Einschränkungen. Bitte lesen Sie diese Hinweise unbedingt, damit Sie das Gerät richtig bedienen und Beschädigungen vermeiden. Kennzeichnet Hinweise zur Bedienung und zusätzliche Erläuterungen zu einem Vorgang. Wir raten Ihnen, diese Hinweise zu lesen. IIlustrationen Sofern nicht anders angegeben, stellen die Abbildungen in diesem Handbuch das FAX-L2000/L2000IP in Standardausführung ohne Optionen dar. Abkürzungen Betriebssystem Microsoft® Windows® 95: Betriebssystem Microsoft® Windows® 98: Betriebssystem Microsoft® Windows® Millennium Edition: Betriebssystem Microsoft® Windows NT®: Betriebssystem Microsoft® Windows® 2000: Betriebssystem Microsoft® Windows® XP: Betriebssystem Microsoft® Windows® : Novell NetWare®: DEUTSCH Produktnamen und Modellbezeichnungen sind in diesem Handbuch folgendermaßen abgekürzt. Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows NetWare vii Warenzeichen Adobe und Acrobat Reader sind Warenzeichen von Adobe Systems Incorporated. Canon, das Canon Logo, FAX-L2000/L2000IP und NetSpot sind Warenzeichen von Canon Inc. Microsoft, Windows und Windows NT sind eingetragene Warenzeichen von Microsoft Corporation in den USA und in anderen Ländern. Wingdings ist ein Warenzeichen von Microsoft Corporation. NetWare und Novell sind eingetragene Warenzeichen von Novell Inc. Novell Distributed Print Service und NDPS sind Warenzeichen von Novell Inc. PCL, PCL 5e, and PCL 6 sind Warenzeichen von Hewlett-Packard Company. UNIX ist ein speziell von X/Open Company, Ltd. lizenziertes eingetragenes Warenzeichen in den USA und in anderen Ländern. Andere in diesem Handbuch angeführte Handels- und Firmennamen sind die Warenzeichen des jeweiligen Eigentümers. Copyright-Vermerk Copyright 2003 von Canon Inc. Alle Rechte vorbehalten. DEUTSCH Ohne vorherige schriftliche Genehmigung von Canon Inc. darf kein Teil dieser Veröffentlichung in irgendeiner Form reproduziert oder übertragen werden, egal in welcher Form und mit welchen Mitteln, sei es elektronisch oder mechanisch, einschließlich Fotokopie und Aufzeichnung und auch nicht mit Hilfe eines beliebigen anderen Systems zur Speicherung oder zum Auffinden von Informationen. viii Verbinden des Geräts mit einem Netzwerk 1 KAPITEL Dieses Kapitel beschreibt, wie Sie das Gerät für Druckbetrieb an einen Computer oder ein Netzwerk anschließen. Einrichten der Netzwerkverbindung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Übersicht über die Einstellungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Anschlüsse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 DEUTSCH Anschließen an ein Netzwerk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Verbinden über eine parallele Schnittstelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 Verbinden über eine USB-Schnittstelle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 1-1 Einrichten der Netzwerkverbindung Dieser Abschnitt beschreibt, wie Sie das Gerät an einen Personal-Computer oder das Netzwerk anschließen, und führt die Stecker und Kabel auf, die Sie verwenden sollten. Übersicht über die Einstellungen Neztwerkverbindung Verbinden Sie die Geräte mit für Ihre Umgebung geeigneten Kabeln. (Siehe Seiten 1-3 bis 1-7.) Über das Schnittstellenkabel Verbindung mit einem Netzwerk DEUTSCH Umgebungseinstellungen Geben Sie Datum und Zeit sowie die Systemadministrator-Einstellungen für die Verwaltung des Systems ein. (Siehe Kapitel 1, „Vor dem Start”, im Faxhandbuch, sowie Kapitel 4, „Einschränken des Systemzugriffs”, im Referenzhandbuch.) Netzwerkeinstellungen Geben Sie die nötigen Einstellungen für Netzwerk und Server ein. (Siehe Kapitel 2, „Einsatz in einem TCP/IP Netzwerk (Windows/UNIX)”, im Netzwerkhandbuch.) Installation des Druckertreibers Installieren Sie den Druckertreiber auf den PCs. Installieren Sie eine beliebige Werkzeugsoftware (Utility) für Ihre Druckumgebung. (Siehe Kapitel 2, „Erste Schritte”, im Handbuch zum PCL-Druckertreiber.) 1-2 Einrichten der Netzwerkverbindung Anschlüsse Verwenden Sie zum Verbinden des Geräts mit dem Computer bzw. Netzwerk ein Schnittstellenkabel, das bidirektionale Kommunikation unterstützt, oder ein 100Base-TX- bzw. 10Base-T Ethernet-Kabel. WARNUNG Ziehen Sie vor dem Herstellen der Schnittstellenkabelverbindung den Netzstecker, um einen elektrischen Schlag zu vermeiden. (Siehe Kapitel 1, „Vor dem Start”, im Referenzhandbuch.) HINWEIS Dieses Gerät wird ohne Schnittstellen- oder Netzwerkkabel ausgeliefert. Beschaffen Sie bitte ein Kabel, das sich für Ihren Computer bzw. das Netzwerk eignet. Dieses Gerät verfügt über einen internen Druckserver, der mit TCP/IP Netzwerken kompatibel ist und den Einsatz des Geräts als Netzwerkdrucker unter UNIX oder Windows erlaubt. Der Druckserver besitzt einen 100Base-TX/10Base-T Port für den Anschluß an ein LAN (lokales Netzwerk). Die Anschlußbeispiele in diesem Abschnitt illustrieren den Anschluß des Geräts an Netzwerke unterschiedlicher LAN-Typen. WICHTIG Zum Anschließen des Geräts an Ihr Netzwerk benötigen Sie ein LAN-Kabel, ein Hub und den Netzwerkdrucker/Fax-Nachrüstsatz FAX-L2000. HINWEIS • Der Druckserver dieses Geräts ist mit NetWare Netzwerken kompatibel. Einzelheiten erfahren Sie bei Ihrem Canon Servicepartner. • Der Druckserver erkennt automatisch, ob er über 100Base-TX oder 10Base-T verbunden ist. • Nach dem Anschluß des Netzwerkkabels führen Sie die folgenden Einrichtungsarbeiten durch. Eine detaillierte Beschreibung der einzelnen Vorgänge finden Sie in den angegebenen Handbüchern. - Installieren des Druckertreibers. (Siehe Kapitel 2, „Erste Schritte”, im Handbuch zum PCL-Druckertreiber.) - Einstellungen für Datum/Uhrzeit und Systemverwaltung. (Siehe Kapitel 1, „Vor dem Start”, im Faxhandbuch, sowie Kapitel 4, „Einschränken des Systemzugriffs”, im Referenzhandbuch.) Anschlüsse 1-3 DEUTSCH Anschließen an ein Netzwerk - Druckserver- und Netzwerkeinstellungen. (Siehe Kapitel 2, „Einsatz in einem TCP/IP Netzwerk (Windows/UNIX)”, im Netzwerkhandbuch.) Verbinden mit einem 100Base-TX-Netzwerk Verbinden Sie das 10Base-T/100Base-TX-Kabel über ein Twisted Pair LAN-Kabel der Kategorie 5 mit dem Hub Port (in einem 100Base-TX-Netzwerk). Verbinden Sie dann das 10Base-T/100Base-TX-Kabel mit dem optionalen Netzwerk-Nachrüstsatz an der Rückseite der FAX-L2000/L2000IP. Wenn Ihr Computer nicht kompatibel mit dem 100Base-TX- Netzwerk ist, benötigen Sie außerdem eine 100Base-TX-Netzwerkkarte. Computer mit 100Base-TX-Anschluß Computer ohne 100Base-TX-Anschluß DEUTSCH 100Base-TXLAN-Karte 100BaseTX-Kabel 100Base-TX-Hub 10Base-T/100Base-TX-Anschluß HINWEIS Hub, LAN-Kabel und Netzwerk-Nachrüstsatz für LAN-Anschluß müssen mit dem 100Base-TX-Netzwerk kompatibel sein. Näheres hierzu erfahren Sie beim Canon-Fachhändler vor Ort. 1-4 Anschlüsse Verbinden mit einem 10Base-T-Netzwerk Verbinden Sie das 10Base-T/100Base-TX-Kabel über ein Twisted Pair LAN-Kabel der Kategorie 3 oder höher mit dem Hub Port (in einem 100Base-T-Netzwerk). Verbinden Sie dann das 10Base-T/100Base-TX-Kabel mit dem optionalen Netzwerk-Nachrüstsatz an der Rückseite der FAX-L2000/L2000IP. Wenn Ihr Computer nicht mit dem 10Base-T-Netzwerk kompatibel ist, benötigen Sie außerdem eine 10Base-T-Netzwerkkarte. Computer mit einem 10Base-T-Anschluß Computer ohne 10Base-T-Anschluß 10Base-TLAN-Karte DEUTSCH 10Base-T-Kabel 10Base-T-Hub 10Base-T/100Base-TX-Anschluß HINWEIS Hub, LAN-Kabel und Netzwerk-Nachrüstsatz für LAN-Anschluß müssen mit dem 100Base-TX-Netzwerk kompatibel sein. Näheres hierzu erfahren Sie beim Canon-Fachhändler vor Ort. Anschlüsse 1-5 Verbinden über eine parallele Schnittstelle Das System läßt sich über eine parallele Schnittstelle mit dem Computer verbinden. Nach dem Verbinden installieren Sie den mitgelieferten Druckertreiber und die passende Utility Software für das Betriebssystem Ihres Computers. Näheres zum Installieren des Druckertreibers und der Utility Software finden Sie im Abschnitt „Software-Installationsanweisungen“ auf Seite 2-7. Verbinden mit einem Windows-Computer Die meisten Computer mit IBM PC/AT-Architektur und andere Windows-Kompatible haben eine parallele Druckerschnittstelle (nach IEEE 1284). Verbinden Sie ein paralleles Druckerkabel mit der Rückseite von FAX-L2000/L2000IP und dem Druckeranschluß des Computers. Druckertreibersoftware Druckerkabel DEUTSCH Paralleler Anschluß * Druckeranschluß Sie ein Centronics-Kabel * Verwenden mit 36-poligem Stecker. Sichern Sie ihn unbedingt mit den Clips an den Seiten. WICHTIG Beim Verbinden eines Computers mit dem parallelen Anschluß des Druckers ist manche Utility Software nicht einsetzbar. Näheres hierzu erfahren Sie beim Canon-Fachhändler vor Ort. 1-6 Anschlüsse Verbinden über eine USB-Schnittstelle Das System läßt sich über eine USB-Schnittstelle mit dem Computer verbinden. Nach dem Verbinden installieren Sie den mitgelieferten Druckertreiber und die passende Utility Software für das Betriebssystem Ihres Computers. Näheres zum Installieren des Druckertreibers und der Utility Software finden Sie im Abschnitt „Software-Installationsanweisungen“ auf Seite 2-7. Verbinden mit einem Windows-Computer Verbinden Sie ein USB-Kabel mit der Rückseite von FAX-L2000/L2000IP und dem USB-Anschluß des Computers. Druckertreibersoftware DEUTSCH USB-Kabel USB-Anschluß USB-Anschluß WICHTIG Bei Anschluß eines Computers an den USB-Anschluß des Druckers ist manche Utility Software nicht einsetzbar. Näheres hierzu erfahren Sie beim Canon-Fachhändler vor Ort. Anschlüsse 1-7 DEUTSCH 1-8 Anschlüsse Installieren von Software 2 KAPITEL Dieses Kapitel beschreibt, wie Sie die Software auf der mit dem Gerät gelieferten Anwendersoftware-CD-ROM installieren. Informationen über die Software auf der CD-ROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Inhalt der CD-ROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Systemanforderungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Installieren der Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Für Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Bei Anschluß des Geräts an einem Netzwerk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 Software-Installationsanweisungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 DEUTSCH Installieren des PCL Druckertreibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7 Installieren von Canon Font Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installieren von NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installieren von LPR Port Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installieren von NetBIOS/NetBEUI Port Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Installieren von DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Installieren des NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Installieren des Faxtreibers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11 2-1 Informationen über die Software auf der CD-ROM Dieser Abschnitt führt die auf der CD-ROM enthaltene Software auf und behandelt, welche Software Sie installieren sollten. Inhalt der CD-ROM Die CD-ROM enthält die folgende Software und Dokumentation: Driver Software ■ Acrobat Reader Wenn diese Software installiert ist, können Sie Online-Handbücher am Bildschirm anzeigen und lesen. ■ PCL Druckerhandbuch DEUTSCH Dieses PDF-Handbuch enthält die Anweisungen für den PCL Drucker. ■ Handbuch zum PCL Druckertreiber Dieses PDF-Handbuch enthält die Anweisungen für die Installation und die Einrichtung des PCL Druckertreibers. ■ Handbuch zum Faxtreiber mit Cover Sheet Editor Dieses PDF-Handbuch enthält die Anweisungen für die Installation und die Einrichtung des Faxtreibers mit Cover Sheet Editor. ■ PCL Druckertreiber Diese Software wird für den Druck aus Windows-basierten Anwendungen benötigt. Installieren Sie diese Software unbedingt. ■ Faxtreiber Installieren Sie diese Software, damit sie die Faxfunktion nutzen können. ■ Font Manager 2000 Installieren Sie diese Software zur Verwaltung der 96 Bildschirm-Schriften (Screen Fonts), die auf der CD-ROM enthalten sind. ■ Bar Code und OCR TTF Installieren Sie diese Schriften, damit sie ordnungsgemäß angezeigt werden können. 2-2 Informationen über die Software auf der CD-ROM HINWEIS • Genauere Angaben zur Installation entnehmen Sie bitte den PDF-Handbüchern und Readme-Dateien in den einzelnen Programmordnern auf der CD-ROM. • Die relevanten PDF-Handbücher hängen von Ihrem FAX-L2000/L2000IP Modell ab. Beziehen Sie sich auf die speziell für Ihr Gerät vorbereiteten PDF-Handbücher. • Zum Aufrufen des CD-ROM-Menüs legen Sie die CD mit der Druckertreiber-Software in Ihr CD-ROM-Laufwerk ein und doppelklicken dann auf [FAXL2000.EXE]. Network User Software ■ Acrobat Reader Wenn diese Software installiert ist, können Sie Online-Handbücher am Bildschirm anzeigen und lesen. ■ Netzwerkhandbuch (mit dem optionalen Canon Netzwerk-Nachrüstsatz) Dieses PDF-Handbuch enthält detaillierte Informationen für den Anschluß der optionalen Netzwerk-Nachrüstsatz an Ihr Netzwerk. ■ Handbuch Remote UI ■ Drucker Installationshandbuch Dieses PDF-Handbuch (die vorliegende Anleitung) enthält detaillierte Informationen für den Anschluß des Geräts und die Einrichtung der Netzwerkumgebung. ■ NetSpot NetSpot ist eine Software, mit der Sie den Status beliebiger Geräte, die an einem Computer oder Netzwerk angeschlossen sind, am Bildschirm Ihres Computers anzeigen können. Die Software eignet sich für Windows-, Macintosh- und UNIX-Rechner. ■ LPR Port Utility LPR Port Utility für Microsoft Windows 95/98/Me ist eine Software für die Druckausgabe von Windows 95/98/Me-Computern an Drucker in einem TCP/IP Netzwerk. ■ NetBIOS/NetBEUI Port Monitor Utility NetBIOS/NetBEUI Port Monitor Utility für Microsoft Windows 95/98/Me ist eine Software für die Druckausgabe von Windows 95/98/Me-Computern an Drucker in einem NetBIOS/ NetBEUI Netzwerk. ■ DSE (Device Status Extension) DSE ist eine Software zum Abrufen von Informationen über gemeinsam genutzte Drucker sowie zum Verwalten von Druckjobs über einen Webbrowser. Informationen über die Software auf der CD-ROM 2-3 DEUTSCH Dieses PDF-Handbuch enthält detaillierte Informationen über die Gerätesteuerung per Webbrowser. ■ Canon NDPS Gateway Mit der Software Canon NDPS Gateway können Canon-Drucker so konfiguriert werden, daß sie in einer Novell NetWare NDPS-Architektur (NDPS = Novell Distributed Print Services) eingesetzt werden können. HINWEIS • Genauere Angaben zur Installation entnehmen Sie bitte den PDF-Handbüchern und Readme-Dateien in den einzelnen Programmordnern auf der CD-ROM. • Die relevanten PDF-Handbücher hängen von Ihrem FAX-L2000/L2000IP Modell ab. Beziehen Sie sich auf die speziell für Ihr Gerät vorbereiteten PDF-Handbücher. Systemanforderungen DEUTSCH Die CD-ROM ist für den Gebrauch mit Windows 95/98/Me-, Windows NT- oder Windows 2000/XP-Computern geeignet. 2-4 Informationen über die Software auf der CD-ROM Installieren der Software Zur Einrichtung der Druckfunktion müssen Sie die Druckertreiber und die relevante Utility-Software installieren. Achten Sie beim Installieren von Software darauf, daß sie die Version verwenden, die mit dem Betriebssystem Ihres Computers kompatibel ist. WICHTIG Genaue Informationen zu den Druckertreibern und der Installation der Software finden Sie in Kapitel 2, „Erste Schritte”, im Handbuch zum PCL Druckertreiber. Für Windows DEUTSCH Wenn Sie mit einem Windows 95/98/Me/2000/XP- oder Windows NT-Computer drucken, installieren Sie den Druckertreiber und die Utility-Software von der mitgelieferten CD-ROM. Die folgende Software ist auf der CD-ROM enthalten. ■ PCL Druckertreiber Diese Software wird für den Druck aus Windows-basierten Anwendungen benötigt. Installieren Sie diese Software unbedingt. ■ NetSpot Mit dieser Drucker-Utilitysoftware können Sie den Status eines Druckers, der an einem Computer oder Netzwerk angeschlossen ist, am Bildschirm Ihres Computers anzeigen. Beim Einrichten des Druckers und seiner Netzwerk-Nachrüstsatz können Sie ihn vom angeschlossenen Computer aus so bedienen wie über sein Bedienfeld. Installieren Sie diese Software bei Bedarf. Installieren der Software 2-5 Bei Anschluß des Geräts an einem Netzwerk Installieren Sie die mitgelieferte „NetSpot” Netzwerkverwaltungssoftware. DEUTSCH HINWEIS • Wenn dieses Gerät an einem Netzwerk angeschlossen wird, müssen Sie das Netzwerk-Betriebssystem (NetWare, UNIX usw.) und die optionale Netzwerk-Nachrüstsatz einrichten. Genauere Informationen zu diesen Einstellungen finden Sie in Kapitel 1, „Vor dem Start”, im Netzwerkhandbuch. • Drucken Sie für den Einsatz in einem Netzwerk die Liste „EN.KONFIG DRUCK” über das TEST MENÜ aus, um die MAC-Adresse der Netzwerk-Nachrüstsatz zu prüfen. Richten Sie dann das Netzwerk-Betriebssystem (NetWare, UNIX usw.) und die Netzwerk-Nachrüstsatz ein. Einzelheiten finden Sie in Kapitel 3, „Übersicht über die Druckermenüs”, im PCL Druckerhandbuch. 2-6 Installieren der Software Software-Installationsanweisungen In diesem Anschnitt erfahren Sie, wie Sie den Druckertreiber, den Faxtreiber und andere Software der mitgelieferten CD-ROM installieren. HINWEIS • Einzelheiten zur Installation des Druckertreibers finden Sie in Kapitel 2, „Erste Schritte”, im Handbuch zum PCL Druckertreiber. • Einzelheiten zur Installation des Faxtreibers finden Sie in Kapitel 2, „Erste Schritte”, im Handbuch zum Faxtreiber. Installieren des PCL Druckertreibers Unter Verwendung des Installationsprogramms 1 Legen Sie die CD-ROM mit der Druckertreiber-Software in das CD-ROM-Laufwerk ein. ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf die folgenden Ordner: [Drivers] ➞ [deutsch] ➞ [prnsetup]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. 2 Folgen Sie zum Beenden der Druckertreiberinstallation den Anweisungen am Bildschirm. Software-Installationsanweisungen 2-7 DEUTSCH WICHTIG Bei Windows NT oder Windows 2000 müssen Sie sich für die Installation des Treibers als Administrator einloggen. Unter Verwendung des Assistenten für die Druckerinstallation 1 2 3 4 Zeigen Sie im Menü [Start] auf [Einstellungen] ➞ Klicken Sie auf [Drucker]. Doppelklicken Sie im Ordner [Drucker] auf das Symbol [Drucker hinzufügen], um den Assistenten für die Druckerinstallation zu starten ➞ Folgen Sie zum Fortsetzen der Installation den Anweisungen am Bildschirm. Legen Sie die CD-ROM mit der Druckertreiber-Software in das CD-ROM-Laufwerk ein ➞ Klicken Sie auf [Diskette]. Klicken Sie auf [Durchsuchen], um den Ordner des zu installierenden Treibers zu wählen ➞ Klicken Sie auf [OK]. Sie können den Treiber aus den folgenden Ordnern auf der CD-ROM auswählen. •PCL5e DEUTSCH Betriebssystem Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Pfad \Drivers\deutsch\printer\pcl5e_5c\win9x_me \Drivers\deutsch\printer\pcl5e_5c\winnt40 \Drivers\deutsch\printer\pcl5e_5c\win2k_xp •PCL6 Betriebssystem Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 2-8 Pfad \Drivers\deutsch\printer\pcl6\win9x_me \Drivers\deutsch\printer\pcl6\winnt40 \Drivers\deutsch\printer\pcl6\win2k_xp 5 Wählen Sie bei [Drucker] Ihr Druckermodell ➞ Klicken Sie auf [Weiter]. 6 Folgen Sie danach den Anweisungen am Bildschirm ➞ Klicken Sie auf [Fertig stellen], um die Dateien zu kopieren. Software-Installationsanweisungen Installieren von Canon Font Manager 1 Legen Sie die CD-ROM mit der Druckertreiber-Software in das CD-ROM-Laufwerk ein. ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf den Ordner [Canonfm] und dann auf den Ordner [deutsch]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. 2 Folgen Sie zum Beenden der Installation den Anweisungen am Bildschirm. Sie können NetSpot von der Network User Software CD installieren. Anweisungen zum Installieren von NetSpot finden Sie in der Anleitung NetSpot-Kurzanleitung. v Installieren von LPR Port Utility 1 Legen Sie die Network User Software CD in das CD-ROM-Laufwerk ein. ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf den Ordner [Lprport]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. 2 Folgen Sie zum Installieren von LPR Port Utility den Anweisungen am Bildschirm. Software-Installationsanweisungen 2-9 DEUTSCH Installieren von NetSpot Installieren von NetBIOS/NetBEUI Port Monitor 1 Legen Sie die Network User Software CD in das CD-ROM-Laufwerk ein. ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf den Ordner [Portmon]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. 2 Folgen Sie zum Installieren von NetBIOS/NetBEUI den Anweisungen am Bildschirm. Installieren von DSE (Device Status Extension) DEUTSCH 1 Legen Sie die Network User Software CD in das CD-ROM-Laufwerk ein. n ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf den Ordner [DSE] ➞ Wählen Sie [Win2000] oder [WinXP] ➞ Klicken Sie auf den Ordner [deutsch]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. 2 Folgen Sie zum Beenden der DSE-Installation den Anweisungen am Bildschirm. Installieren des NDPS Gateway Sie können NDPS Gateway von der Network User Software CD installieren. Anweisungen zum Installieren von NDPS Gateway finden Sie im Handbuch für NDPS Gateway auf derselben CD. 2-10 Software-Installationsanweisungen Installieren des Faxtreibers WICHTIG Bei Windows NT oder Windows 2000 müssen Sie sich für die Installation des Treibers als Administrator einloggen. Unter Verwendung des Installationsprogramms 1 Legen Sie die CD-ROM mit der Druckertreiber-Software in das CD-ROM-Laufwerk ein. ❑ Doppelklicken Sie auf das Symbol [Arbeitsplatz] und dann auf das Symbol des CD-ROM-Laufwerks. ❑ Doppelklicken Sie auf die folgenden Ordner: [Fax_Driver] ➞ [deutsch] ➞ [faxsetup]. ❑ Doppelklicken Sie auf das Symbol [Setup.exe], um den Installationsvorgang zu starten. Folgen Sie zum Beenden der Faxtreiberinstallation den Anweisungen am Bildschirm. DEUTSCH 2 Unter Verwendung des Assistenten für die Druckerinstallation (Windows) 1 2 3 Zeigen Sie im Menü [Start] auf [Einstellungen] ➞ Klicken Sie auf [Drucker]. Doppelklicken Sie im Ordner [Drucker] auf das Symbol [Drucker hinzufügen], um den Assistenten für die Druckerinstallation zu starten. ➞ Folgen Sie zum Fortsetzen der Installation den Anweisungen am Bildschirm. Legen Sie die CD-ROM mit der Druckertreiber-Software in das CD-ROM-Laufwerk ein. ➞ Klicken Sie auf [Diskette]. Software-Installationsanweisungen 2-11 4 Klicken Sie auf [Durchsuchen], um den Ordner des zu installierenden Treibers zu wählen. ➞ Klicken Sie auf [OK]. Sie können den Treiber aus den folgenden Ordnern auf der CD-ROM auswählen. Betriebssystem Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 5 Wählen Sie bei [Drucker] Ihr Faxmodell. ➞ Klicken Sie auf [Weiter]. 6 Folgen Sie danach den Anweisungen am Bildschirm. ➞ Klicken Sie auf [Fertig stellen], um die Dateien zu kopieren. DEUTSCH 2-12 Pfad \Fax_Drivers\deutsch\fax\win9x_me \Fax_Drivers\deutsch\fax\winnt40 \Fax_Drivers\deutsch\fax\win2k_xp Software-Installationsanweisungen FAX-L2000/L2000IP Guida all’installazione Manuali del dispositivo I manuali relativi al presente dispositivo sono suddivisi nel modo qui esposto. Per informazioni dettagliate, consultare i singoli manuali. Nell'elenco riportato di seguito sono compresi i manuali forniti insieme alle apparecchiature opzionali. In base alla configurazione del sistema e al prodotto acquistato, alcuni manuali potrebbero non essere necessari. I documenti accompagnati da questo simbolo sono manuali stampati. • Operazioni principali • Risoluzione dei problemi • Istruzioni per l'invio CD-ROM I documenti accompagnati da questo simbolo sono manuali in formato PDF contenuti nel CD-ROM accluso. Guida di riferimento Guida alla funzione di transmissione • Istruzioni per il fax • Configurazione della connessione di rete e installazione del software dal CD-ROM Guida Fax Guida all’installazione (Questo documento) ITALIANO • Istruzioni per l'interfaccia utente remoto stampante PCL • Installazione e istruzioni per il driver fax e l'editor di copertina CD-ROM CD-ROM CD-ROM Guida per la rete CD-ROM Guida di Stampa PCL CD-ROM Guida del Driver PCL CD-ROM Guida del driver del fax con Cover Sheet Editor CD-ROM configurazione • Installazione e istruzioni per il driver CD-ROM Guida Interfaccia Utente Remota • Connettività di rete e istruzioni per la • Istruzioni per la stampante PCL CD-ROM Il dispositivo illustrato in copertina può risultare leggermente diverso da quello utilizzato. How Suddivisione del presente manuale Collegamento del dispositivo alla rete Capitolo 2 Installazione del software ITALIANO Capitolo 1 Sono stati notevoli gli sforzi tesi a garantire l'assenza di imprecisioni e omissioni nel presente manuale. Tuttavia, i nostri prodotti sono sottoposti a continui sviluppi; pertanto, per ottenere specifiche esatte, rivolgersi a Canon. Contents Prefazione. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi Come leggere questo manuale. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Simboli utilizzati in questo manuale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Illustrazioni utilizzate in questo manuale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Abbreviazioni utilizzate in questo manuale . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Marchi di fabbrica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Capitolo 1 Collegamento del dispositivo alla rete Configurazione di un collegamento di rete . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Diagramma di flusso delle impostazioni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Realizzazione dei collegamenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento alla rete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento a una rete 100Base-TX . . . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento a una rete 10Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento attraverso un’interfaccia parallela . . . . . . . . . . . . . . . . . . . . . . Collegamento a un computer Windows . . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento attraverso un’interfaccia USB . . . . . . . . . . . . . . . . . . . . . . . . . Collegamento a un computer Windows . . . . . . . . . . . . . . . . . . . . . . . . . . ITALIANO Capitolo 2 1-3 1-3 1-4 1-5 1-6 1-6 1-7 1-7 Installazione del software Informazioni sul software contenuto nel CD-ROM . . . . . . . . . . . . . . . . . . . . . Contenuto del CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network User Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Requisiti di sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2-2 2-2 2-3 2-4 Installazione del software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 In Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Dispositivo collegato alla rete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Istruzioni di installazione del software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installazione del driver stampante PCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Uso del programma di installazione. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Uso dell'Installazione guidata stampante . . . . . . . . . . . . . . . . . . . . . . . . Installazione di Canon Font Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installazione di NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installazione di LPR Port Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installazione di NetBIOS/NetBEUI Port Monitor. . . . . . . . . . . . . . . . . . . . . . . Installazione di DSE (Device Status Extension). . . . . . . . . . . . . . . . . . . . . . . iv 2-6 2-6 2-6 2-6 2-8 2-8 2-8 2-9 2-9 ITALIANO Installazione di NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installazione del driver fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Uso del programma di installazione . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Uso dell'Installazione guidata stampante di Windows . . . . . . . . . . . . . .2-10 v Prefazione Grazie per avere acquistato Canon FAX-L2000/L2000IP. Leggere attentamente il presente manuale prima di utilizzare il dispositivo, in modo da imparare a conoscerne le capacità e a sfruttarne al meglio le varie funzioni. Dopo la lettura, conservare il presente manuale in luogo sicuro come riferimento per il futuro. Come leggere questo manuale Simboli utilizzati in questo manuale I seguenti simboli vengono utilizzati nel presente manuale per spiegare procedure, limitazioni, precauzioni per il maneggiamento e istruzioni da seguire ai fini della sicurezza. I AVVERTENZA Si riferisce alle operazioni che possono comportare la morte o il ferimento delle persone, se non eseguite correttamente. Per utilizzare il dispositivo in modo sicuro, prestare sempre attenzione a queste avvertenze. ITALIANO ATTENZIONE IMPORTANTE NOTA vi Si riferisce alle operazioni che possono comportare il ferimento delle persone o il danneggiamento delle cose, se non eseguite correttamente. Per utilizzare il dispositivo in modo sicuro, prestare sempre attenzione a questi richiami. Indica requisiti e limitazioni operative. Accertarsi di leggere attentamente questi richiami per utilizzare correttamente il dispositivo ed evitare di danneggiarlo. Indica un chiarimento relativo a un'operazione o contiene spiegazioni aggiuntive su una procedura. La lettura di queste note è particolarmente consigliata. Illustrazioni utilizzate in questo manuale Tranne nei casi diversamente specificati, le illustrazioni di questo manuale si riferiscono al dispositivo FAX-L2000/L2000IP senza apparecchiature opzionali. Abbreviazioni utilizzate in questo manuale Nel presente manuale, i nomi dei prodotti e i nomi dei modelli sono abbreviati come segue: Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows NetWare ITALIANO Sistema operativo Microsoft® Windows® 95: Sistema operativo Microsoft® Windows® 98: Sistema operativo Microsoft® Windows® Millennium Edition: Sistema operativo Microsoft® Windows NT®: Sistema operativo Microsoft® Windows® 2000: Sistema operativo Microsoft® Windows® XP: Sistema operativo Microsoft® Windows®: Novell NetWare®: vii Marchi di fabbrica Adobe e Acrobat Reader sono marchi di fabbrica di Adobe Systems Incorporated. Canon, il logo Canon, FAX-L2000/L2000IP e NetSpot sono marchi di fabbrica di Canon Inc. Microsoft, Windows e Windows NT sono marchi registrati di Microsoft Corporation negli Stati Uniti d'America e in altri Paesi. Wingdings è un marchio di fabbrica di Microsoft Corporation. NetWare e Novell sono marchi registrati di Novell Inc. Novell Distributed Print Service e NDPS sono marchi di fabbrica di Novell Inc. PCL, PCL 5e e PCL 6 sono marchi di fabbrica di Hewlett-Packard Company. UNIX è un marchio registrato concesso in licenza esclusiva da X/Open Company, Ltd. negli Stati Uniti d'America e in altri Paesi. Gli altri nomi di prodotti e società qui citati possono essere marchi di fabbrica dei rispettivi proprietari. Copyright Copyright 2003 by Canon Inc. Tutti i diritti riservati. ITALIANO Nessuna parte di questo documento può essere riprodotta o trasmessa in qualsiasi forma e con qualsiasi mezzo, elettronico o meccanico, compresa la copia fotostatica e la registrazione, o mediante sistemi di memorizzazione e recupero di informazioni senza autorizzazione scritta da parte di Canon Inc. viii Collegamento del dispositivo alla rete 1 CAPITOLO Nel presente capitolo viene descritto come collegare il dispositivo a un computer o alla rete in modo da potere eseguire stampe. Configurazione di un collegamento di rete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Diagramma di flusso delle impostazioni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Realizzazione dei collegamenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 ITALIANO Collegamento alla rete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Collegamento attraverso un’interfaccia parallela. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 Collegamento attraverso un’interfaccia USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 1-1 Configurazione di un collegamento di rete Nella presente sezione viene descritto come collegare il dispositivo al PC o alla rete e vengono elencati i tipi di connettori e di cavi da utilizzare. Diagramma di flusso delle impostazioni Esecuzione di un collegamento Collegare i cavi necessari per l'ambiente specifico (vedere da pagina 1-3 a pagina 1-7). Uso del cavo di interfaccia Collegamento alla rete Impostazioni dell'ambiente ITALIANO Immettere la data e l'ora e le impostazioni di System Manager per le operazioni di gestione del sistema (vedere il capitolo 1 "Prima di utilizzare la macchina" nel documento Guida Fax e il capitolo 4 "Restrizioni all'uso della macchina" nel documento Guida di riferimento). Impostazioni della rete Immettere le necessarie impostazioni relative alla rete e al server (vedere il capitolo 2 "Uso di una rete TCP/IP (Windows/UNIX)" nel documento Guida per la rete). Installazione del driver stampante Installare il driver stampante sui PC. Installare il software di utilità eventualmente necessario per l'ambiente di rete specifico (vedere il capitolo 2 "Guida introduttiva" nel documento Guida del Driver PCL). 1-2 Configurazione di un collegamento di rete Realizzazione dei collegamenti Collegare il dispositivo a un computer o alla rete con un cavo di interfaccia capace di supportare la comunicazione bidirezionale o con un cavo Ethernet 100Base-TX o 10Base-T. AVVERTENZA Per evitare il rischio di scosse elettriche, scollegare il cavo di alimentazione dalla presa a muro prima di inserire il cavo di interfaccia o il cavo di rete (vedere il capitolo 1 “Prima di utilizzare la macchina” nel documento Guida di riferimento). NOTA Il cavo di interfaccia e il cavo di rete non vengono forniti in dotazione con questo dispositivo. Si raccomanda di acquistare il tipo di cavo compatibile con il computer o la rete in uso. Questo dispositivo dispone di un server di stampa incorporato compatibile con le reti TCP/IP, il quale consente di utilizzare l'apparecchio come stampante di rete per UNIX e Windows. Il server di stampa è dotato di una porta 100Base-TX/10Base-T per il collegamento a una rete locale LAN (Local Area Network). Gli esempi di collegamento riportati in questa sezione mostrano come collegare il dispositivo a una rete, a seconda del tipo di LAN. IMPORTANTE Per collegare la macchina alla rete è necessario un cavo LAN, un hub e un kit per stampante/fax di rete FAX-L2000. NOTA • Il server di stampa di questo dispositivo è compatibile con le reti NetWare. Per maggiori dettagli, rivolgersi al più vicino rivenditore Canon autorizzato. • Il server di stampa di questo dispositivo rileva automaticamente il collegamento di interfaccia 100Base-TX o 10Base-T. • Dopo avere collegato il cavo di rete, eseguire le procedure elencate qui sotto. Per maggiori dettagli sulle singole procedure, fare riferimento al manuale corrispondente. - Installazione del driver stampante (vedere il capitolo 2 “Guida introduttiva” nel documento Guida del Driver PCL). Realizzazione dei collegamenti 1-3 ITALIANO Collegamento alla rete - Immissione di data/ora e impostazioni di gestione del sistema (vedere il capitolo 1 “Prima di utilizzare la macchina” nel documento Guida Fax e il capitolo 4 “Restrizioni all’uso della macchina” nel documento Guida di riferimento). - Impostazioni del server di stampa e della rete (vedere il capitolo 2 “Uso di una rete TCP/IP (Windows/UNIX)” nel documento Guida per la rete). Collegamento a una rete 100Base-TX Collegare il cavo 10Base-T/100Base-TX alla porta dell’hub utilizzando un cavo LAN a doppino intrecciato categoria 5 per reti 100Base-TX. Quindi, collegare il cavo 10Base-T/100Base-TX al kit di rete opzionale presente sul retro della macchina FAX-L2000/L2000IP. Se il computer non è compatibile con una rete 100Base-TX è necessaria anche una scheda di rete 100Base-TX. Computer con una porta 100Base-TX Computer senza una porta 100Base-TX Scheda LAN 100Base-TX ITALIANO Cavo 100Base-TX Hub 100Base-TX Porta 10Base-T/100Base-TX NOTA L’hub, il cavo LAN e il kit di rete collegati alla LAN devono essere compatibili con reti 100Base-TX. Per ulteriori dettagli, contattare un rivenditore autorizzato Canon. 1-4 Realizzazione dei collegamenti Collegamento a una rete 10Base-T Collegare il cavo 10Base-T/100Base-TX alla porta dell’hub utilizzando un cavo LAN a doppino intrecciato categoria 3 o superiore per reti 10Base-T. Quindi, collegare il cavo 10Base-T/100Base-TX al kit di rete opzionale presente sul retro della macchina FAX-L2000/L2000IP. Se il computer non è compatibile con una rete 10Base-T è necessaria anche una scheda di rete 10Base-T. Computer con una porta 10Base-T Computer senza una porta 10Base-T Scheda LAN 10Base-T Cavo 10Base-T ITALIANO Hub 10Base-T Porta 10Base-T/100Base-TX NOTA L’hub, il cavo LAN e il kit di rete collegati alla LAN devono essere compatibili con reti 10Base-T. Per ulteriori dettagli, contattare un rivenditore autorizzato Canon. Realizzazione dei collegamenti 1-5 Collegamento attraverso un’interfaccia parallela Questa macchina può essere collegata a un computer attraverso un’interfaccia parallela. Dopo il collegamento, installare il driver di stampa e il software utility forniti, specifici per il sistema operativo del computer. Per ulteriori informazioni sull’installazione del driver di stampa e del software utility, vedere “Istruzioni di installazione del software” a p. 2-6. Collegamento a un computer Windows La maggior parte dei computer IBM PC/AT e altri computer Windows compatibili contengono un collegamento di porta stampante parallelo (conforme allo standard IEEE 1284). Collegare un cavo stampante parallelo al retro della macchina FAX-L2000/L2000IP e alla porta stampante del computer. Software driver stampante Cavo della stampante ITALIANO Porta parallela * Porta della stampante un cavo Centronics a 36 pin. * Collegare Assicurarsi di fissare i fermi a entrambi i lati. IMPORTANTE Se si è collegato un computer alla porta parallela di questa macchina, alcuni programmi utility non possono essere utilizzati. Per ulteriori dettagli, contattare un rivenditore autorizzato Canon. 1-6 Realizzazione dei collegamenti Collegamento attraverso un’interfaccia USB Questa macchina può essere collegata a un computer attraverso un’interfaccia USB. Dopo il collegamento, installare il driver di stampa e il software utility forniti, specifici per il sistema operativo del computer. Per ulteriori informazioni sull’installazione del driver di stampa e del software utility, vedere “Istruzioni di installazione del software” a p. 2-6. Collegamento a un computer Windows Collegare un cavo USB al retro della macchina FAX-L2000/L2000IP e alla porta USB del computer. Software driver stampante Cavo USB Porta USB ITALIANO Porta USB IMPORTANTE Se si è collegato un computer alla porta USB di questa macchina, alcuni programmi utility non possono essere utilizzati. Per ulteriori dettagli, contattare un rivenditore autorizzato Canon. Realizzazione dei collegamenti 1-7 ITALIANO 1-8 Realizzazione dei collegamenti Installazione del software 2 CAPITOLO Nel presente capitolo viene descritto come installare il software contenuto nel CD-ROM User Software fornito insieme al dispositivo. Informazioni sul software contenuto nel CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Contenuto del CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Requisiti di sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Installazione del software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 In Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Dispositivo collegato alla rete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Istruzioni di installazione del software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 ITALIANO Installazione del driver stampante PCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 Installazione di Canon Font Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installazione di NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installazione di LPR Port Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Installazione di NetBIOS/NetBEUI Port Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installazione di DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installazione di NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Installazione del driver fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 2-1 Informazioni sul software contenuto nel CD-ROM Nella presente sezione viene elencato il contenuto del CD-ROM e viene indicato il software da installare. Contenuto del CD-ROM Il CD-ROM contiene il software e la documentazione descritti di seguito: Driver Software ■ Acrobat Reader Installare questo software per visualizzare i manuali in linea. ■ Guida di Stampa PCL Questo manuale in formato PDF contiene le istruzioni per le stampanti PCL. ■ Guida del Driver PCL Questo manuale in formato PDF contiene le istruzioni per l'installazione del driver stampante PCL. ITALIANO ■ Guida del driver del fax cover sheet editor Questo manuale in formato PDF contiene le istruzioni per l'installazione del driver fax e dell'editor di copertina. ■ PCL Printer Driver È essenziale installare questo software per eseguire la stampa dalle applicazioni basate su Windows. Accertarsi di installare questo software. ■ Driver fax Installare questo software per utilizzare la funzione fax. ■ Font Manager 2000 Installare questo software per gestire i 96 tipi di caratteri per schermo contenuti nel CD-ROM. ■ Bar Code e OCR TTF Installare questi caratteri per una visualizzazione corretta. 2-2 Informazioni sul software contenuto nel CD-ROM NOTA • Per maggiori dettagli sulle procedure di installazione, fare riferimento ai manuali in formato PDF e ai file readme.txt in ciascuna cartella di programma contenuta nel CD-ROM. • I manuali in formato PDF possono variare in base al dispositivo FAX-L2000/L2000IP utilizzato. Consultare i manuali in formato PDF relativi al dispositivo specifico. • Per accedere al menu del CD-ROM, inserire il CD Driver Software nell'unità CD-ROM ➞ fare doppio clic su [FAXL2000.EXE]. Network User Software ■ Acrobat Reader Installare questo software per visualizzare i manuali in linea. ■ Guida per la rete (con Canon Kit di rete opzionale) Questo manuale in formato PDF contiene informazioni dettagliate sul collegamento della Kit di rete opzionale alla rete. ■ Guida Interfaccia Utente Remota Questo manuale in formato PDF contiene informazioni dettagliate sul controllo del dispositivo attraverso un browser Web. ■ Guida all’installazione Questo manuale in formato PDF (il presente manuale) contiene informazioni dettagliate sul collegamento del dispositivo alla rete e sulla configurazione dell'ambiente di rete. ■ NetSpot ITALIANO NetSpot è un software che consente di visualizzare lo stato di qualsiasi dispositivo collegato al computer o alla rete sullo schermo del computer. Questo software viene eseguito su computer dotati di Windows, Macintosh e UNIX. ■ LPR Port Utility LPR Port Utility per Microsoft Windows 95/98/Me è un software che consente di inviare comandi di stampa da computer Windows 95/98/Me a stampanti collegate in rete TCP/IP. ■ NetBIOS/NetBEUI Port Monitor Utility NetBIOS/NetBEUI Port Monitor Utility per Microsoft Windows 95/98/Me è un software che consente di inviare comandi di stampa da computer Windows 95/98/Me a stampanti collegate in rete NetBIOS/NetBEUI. ■ DSE (Device Status Extension) DSE è un software che consente di esaminare informazioni sulle stampanti condivise e di gestire lavori di stampa attraverso un browser Web. Informazioni sul software contenuto nel CD-ROM 2-3 ■ Canon NDPS Gateway Il software Canon NDPS Gateway configura le stampanti Canon per consentirne il funzionamento nell'architettura Novell NetWare NDPS (Novell Distributed Print Services). NOTA • Per maggiori dettagli sulle procedure di installazione, fare riferimento ai manuali in formato PDF e ai file readme.txt in ciascuna cartella di programma contenuta nel CD-ROM. • I manuali in formato PDF possono variare in base al dispositivo FAX-L2000/L2000IP utilizzato. Consultare i manuali in formato PDF relativi al dispositivo specifico. Requisiti di sistema ITALIANO Il CD-ROM è progettato per essere utilizzato su computer dotati di Windows 95/98/Me, Windows NT o Windows 2000/XP. 2-4 Informazioni sul software contenuto nel CD-ROM Installazione del software Prima di stampare, è necessario installare i driver stampante e il software di utilità. Nell'installazione del software, accertarsi di installare la corretta versione di software compatibile con il sistema operativo del computer. IMPORTANTE Per maggiori dettagli sui driver stampante e sull'installazione del software, vedere il capitolo 2 “Guida introduttiva” nel documento Guida del Driver PCL. In Windows Per stampare da un computer dotato di Windows 95/98/Me/2000/XP o Windows NT, installare il driver stampante e il software di utilità contenuti nel CD-ROM in dotazione. Il CD-ROM fornito in dotazione contiene il seguente software. ■ PCL Printer Driver ■ NetSpot Il software di utilità della stampante consente di visualizzare lo stato di una stampante collegata al computer o alla rete sullo schermo del computer. Se vengono configurate la stampante e il Kit di rete, la stampante può essere controllata dal computer collegato nello stesso modo in cui viene controllata dal pannello operativo. Installare questo software se necessario. Dispositivo collegato alla rete Installare il software di amministrazione della rete “NetSpot” fornito in dotazione. NOTA • Se il dispositivo viene collegato in rete, è necessario configurare il sistema operativo della rete (NetWare, UNIX, ecc.) e il Kit di rete opzionale. Per queste impostazioni, vedere il capitolo 1 “Prima di iniziare” nel documento Guida per la rete. • Se il dispositivo viene collegato in rete, stampare l'elenco “PRINT EN CONFIG” dal TEST MENU per verificare l'indirizzo MAC del Kit di rete. Quindi, configurare il sistema operativo della rete (NetWare, UNIX, ecc.) e il Kit di rete. Per maggiori dettagli, vedere il capitolo 3 “Sommario dei menu della stampante” nel documento Guida di Stampa PCL. Installazione del software 2-5 ITALIANO È essenziale installare questo software per eseguire la stampa dalle applicazioni basate su Windows. Accertarsi di installare questo software. Istruzioni di installazione del software Nella presente sezione viene descritto come installare il driver stampante, il driver fax e l'altro software contenuto nel CD-ROM in dotazione. NOTA • Per maggiori dettagli sull'installazione del driver stampante, vedere il capitolo 2 “Guida introduttiva” nel documento Guida del Driver PCL. • Per maggiori dettagli sull'installazione del driver fax, vedere il capitolo 2 “Guida introduttiva” nel documento Fax Driver Guide. Installazione del driver stampante PCL IMPORTANTE In Windows NT o Windows 2000, accedere come “administrator” per installare il driver. Uso del programma di installazione 1 Inserire il CD Driver Software nell'unità CD-ROM. ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ITALIANO ❑ Fare doppio clic sulle seguenti cartelle: [Drivers] ➞ [italiano] ➞ [prnsetup]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. 2 Seguire le istruzioni a video per completare l'installazione del driver stampante. Uso dell'Installazione guidata stampante 1 2 2-6 Nel menu [Start], puntare su [Impostazioni] ➞ fare clic su [Stampanti]. Nella cartella [Stampanti], fare doppio clic sull'icona [Aggiungi stampante] per avviare l'Installazione guidata stampante ➞ seguire le istruzioni a video per procedere all'installazione. Istruzioni di installazione del software 3 4 Inserire il CD Driver Software nell'unità CD-ROM ➞ fare clic su [Disco driver]. Fare clic su [Sfoglia] per selezionare la cartella del driver da installare ➞ fare clic su [OK]. È possibile selezionare il driver dalle seguenti cartelle contenute nel CD-ROM. •PCL5e Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Percorso \Drivers\italiano\printer\pcl5e_5c\win9x_me \Drivers\italiano\printer\pcl5e_5c\winnt40 \Drivers\italiano\printer\pcl5e_5c\win2k_xp •PCL6 Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Percorso \Drivers\italiano\printer\pcl6\win9x_me \Drivers\italiano\printer\pcl6\winnt40 \Drivers\italiano\printer\pcl6\win2k_xp Selezionare il modello di stampante da [Stampanti] ➞ fare clic su [Avanti]. 6 Seguire le istruzioni a video per continuare ➞ fare clic su [Fine] per avviare la copia dei file. ITALIANO 5 Istruzioni di installazione del software 2-7 Installazione di Canon Font Manager 1 Inserire il CD Driver Software nell'unità CD-ROM. ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ❑ Fare doppio clic sulla cartella [Canonfm] ➞ cartella [italiano]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. 2 Seguire le istruzioni a video per completare l'installazione di Canon Font Manager. Installazione di NetSpot È possibile installare NetSpot dal CD Network User Software. Per istruzioni sull'installazione di NetSpot, consultare la Guida di installazione rapida NetSpot contenuta nello stesso CD. v Installazione di LPR Port Utility 1 Inserire il CD Network User Software nell'unità CD-ROM. ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ITALIANO ❑ Fare doppio clic sulla cartella [Lprport]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. 2 2-8 Seguire le istruzioni a video per completare l'installazione di LPR Port Utility. Istruzioni di installazione del software Installazione di NetBIOS/NetBEUI Port Monitor 1 Inserire il CD Network User Software nell'unità CD-ROM. ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ❑ Fare doppio clic sulla cartella [Portmon]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. 2 Seguire le istruzioni a video per completare l'installazione di NetBIOS/NetBEUI Port Monitor. Installazione di DSE (Device Status Extension) 1 Inserire il CD Network User Software nell'unità CD-ROM. n ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ❑ Fare doppio clic sulla cartella [DSE] ➞ selezionare [Win2000] o [WinXP] ➞ fare clic sulla cartella [italiano]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. Seguire le istruzioni a video per completare l'installazione di DSE. Installazione di NDPS Gateway È possibile installare NDPS Gateway dal CD Network User Software. Per istruzioni sull'installazione di NDPS Gateway, consultare la relativa guida dell'utente contenuta nello stesso CD. Installazione del driver fax IMPORTANTE In Windows NT o Windows 2000, accedere come “administrator” per installare il driver. Istruzioni di installazione del software 2-9 ITALIANO 2 Uso del programma di installazione 1 Inserire il CD Driver Software nell'unità CD-ROM. ❑ Fare doppio clic sull'icona [Risorse del computer] ➞ icona dell'unità CD-ROM. ❑ Fare doppio clic sulle seguenti cartelle: [Fax_Driver] ➞ [italiano] ➞ [faxsetup]. ❑ Fare doppio clic sull'icona [Setup.exe] per avviare la procedura di installazione. 2 Seguire le istruzioni a video per completare l'installazione del driver fax. Uso dell'Installazione guidata stampante di Windows 1 2 3 ITALIANO 4 Nel menu [Start], puntare su [Impostazioni] ➞ fare clic su [Stampanti]. Nella cartella [Stampanti], fare doppio clic sull'icona [Aggiungi stampante] per avviare l'Installazione guidata stampante ➞ seguire le istruzioni a video per procedere all'installazione. Inserire il CD Driver Software nell'unità CD-ROM ➞ fare clic su [Disco driver]. Fare clic su [Sfoglia] per selezionare la cartella del driver da installare ➞ fare clic su [OK]. È possibile selezionare il driver dalle seguenti cartelle contenute nel Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Percorso \Fax_Drivers\italiano\fax\win9x_me \Fax_Drivers\italiano\fax\winnt40 \Fax_Drivers\italiano\fax\win2k_xp CD-ROM. 2-10 5 Selezionare il modello di fax da [Stampanti] ➞ fare clic su [Avanti]. 6 Seguire le istruzioni a video per continuare ➞ fare clic su [Fine] per avviare la copia dei file. Istruzioni di installazione del software FAX-L2000/L2000IP Guía de Instalación Manuales del equipo Los manuales de esta máquina se dividen de la siguiente forma. Consúltelos para obtener información detallada. Los manuales suministrados con los equipos opcionales están incluidos en la lista anterior. Según la configuración del sistema y el producto adquirido, es posible que algunos manuales no sean necesarios. Las guías con este símbolo son manuales impresos. • Funciones básicas • Solución de problemas CD-ROM Las guías señaladas con este símbolo son manuales en formato PDF incluidos en el CD-ROM entregado con el equipo. Guía de Referencia • Instrucciones de envío Guía de Envío • Instrucciones de fax • Configurar la conexión de red e instalar el software del CD-ROM • Instrucciones sobre el IU remoto Guía de Facsímil Guía de Instalación (Esta documentación) ESPAÑOL impresora PCL • Instalación e instrucciones del controlador de fax y el editor de portadas CD-ROM CD-ROM CD-ROM Guía de Red CD-ROM Guía de impresora PCL CD-ROM Guía del Controlador PCL CD-ROM Guía del Controlador de Fax con Editor de Portadas CD-ROM configuración de red • Instalación e instrucciones del controlador de CD-ROM Guía de IU Remoto • Instrucciones sobre conexiones y • Instrucciones de impresora PCL CD-ROM El equipo cuya ilustración aparece en la portada puede ser ligeramente distinto al suyo. Organización de este manual Conectar el equipo Capítulo 2 Instalar el software ESPAÑOL Capítulo 1 Se ha desarrollado un considerable esfuerzo para asegurar que este manual esté libre de inexactitudes y omisiones. No obstante, y debido al continuo perfeccionamiento de nuestros productos, consulte a Canon si necesita una especificación exacta. Indice Prefacio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi Cómo utilizar este manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Símbolos utilizados en este manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Ilustraciones utilizadas en este manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Abreviaturas utilizadas en este manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Marcas comerciales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Capítulo 1 Conectar el equipo Configurar la conexión . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Flujograma de configuración . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Realización de conexiones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a una red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a una red 100Base-TX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a una red 10Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a través de un interface paralelo . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a un ordenador Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a través de un interface USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conexión a un ordenador Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Capítulo 2 Instalar el software Acerca del CD-ROM del software de usuario . . . . . . . . . . . . . . . . . . . . . . . . . Contenido del CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Network User Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Requisitos del sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ESPAÑOL 1-3 1-3 1-4 1-5 1-6 1-6 1-7 1-7 2-2 2-2 2-2 2-3 2-4 Instalar el software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 En Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Cuando el equipo está conectado a una red . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Instrucciones de instalación del software. . . . . . . . . . . . . . . . . . . . . . . . . . . . Instalar el controlador de impresora PCL. . . . . . . . . . . . . . . . . . . . . . . . . . . . Mediante el instalador . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mediante el Asistente para agregar impresora . . . . . . . . . . . . . . . . . . . . Instalar Canon Font Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instalar NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instalar la utilidad de puerto LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instalar el monitor de puerto NetBIOS/NetBEUI . . . . . . . . . . . . . . . . . . . . . . Instalar DSE (Device Status Extension). . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv 2-6 2-6 2-6 2-7 2-8 2-8 2-8 2-9 2-9 ESPAÑOL Instalar NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Instalar el controlador de fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Mediante el instalador . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 Mediante el Asistente para agregar impresora de Windows. . . . . . . . . .2-10 v Prefacio Gracias por adquirir el FAX-L2000/L2000IP de Canon. Antes de utilizar la máquina, lea atentamente este manual con el fin de familiarizarse con las prestaciones del equipo y aprovechar al máximo sus múltiples funciones. Después de leer este manual, guárdelo en un lugar seguro para futuras consultas. Cómo utilizar este manual Símbolos utilizados en este manual En este manual se utilizan los siguientes símbolos para explicar procedimientos, limitaciones, precauciones de manipulación e instrucciones que deben ser observadas por razones de seguridad. I ADVERTENCIA Indica una advertencia relativa a operaciones que pueden ocasionar lesiones personales si no se ejecutan correctamente. Con objeto de utilizar la máquina de forma segura, preste especial atención a estas advertencias. PRECAUCIÓN Indica una precaución relativa a operaciones que pueden ocasionar lesiones personales o daños materiales si no se efectúa correctamente. Con objeto de utilizar la máquina de forma segura, preste especial atención a estas precauciones. IMPORTANTE ESPAÑOL NOTA Indica requisitos y limitaciones de manejo. Lea estos puntos para asegurarse de que maneja la máquina correctamente y, de esta forma, evitar averías. Indica una aclaración acerca de una operación o contiene explicaciones adicionales para un determinado procedimiento. Se recomienda encarecidamente la lectura de estas notas. Este equipo cumple con los requerimientos esenciales de la Directive EC 1999/ 5/ EC. Declaramos que este producto cumple con los requerimientos EMC de la Directiva 1999/ 5/ EC para 230V y 50Hz de entrada nominal, aunque además acepta entradas en el rango 220V- 240V, 50/ 60Hz. Si cambia a otro país de la UE y tiene problemas, por favor llame al servicio Help Desk de Canon. (Sólo para Europa) vi Ilustraciones utilizadas en este manual A menos que se indique lo contrario, las ilustraciones de este manual corresponden al FAX-L2000/L2000IP sin equipos opcionales instalados. Abreviaturas utilizadas en este manual En este manual, los nombres de los productos y de los modelos han sido abreviados de la siguiente manera: Windows 95 Windows 98 Windows Me Windows NT Windows 2000 Windows XP Windows NetWare ESPAÑOL Sistema operativo Microsoft® Windows® 95: Sistema operativo Microsoft® Windows® 98: Sistema operativo Microsoft® Windows® Millennium Edition: Sistema operativo Microsoft® Windows NT®: Sistema operativo Microsoft® Windows® 2000: Sistema operativo Microsoft® Windows® XP: Sistema operativo Microsoft® Windows®: Novell NetWare®: vii Marcas comerciales Adobe y Acrobat Reader son marcas comerciales de Adobe Systems Incorporated. Canon, el logotipo de Canon, FAX-L2000/L2000IP, y NetSpot son marcas comerciales de Canon Inc. Microsoft, Windows y Windows NT son marcas registradas de Microsoft Corporation en los Estados Unidos de América y en otros países. Wingdings es una marca comercial de Microsoft Corporation. NetWare y Novell son marcas registradas de Novell Inc. Novell Distributed Print Service y NDPS son marcas comerciales de Novell Inc. PCL, PCL 5e y PCL 6 son marcas comerciales de Hewlett-Packard Company. UNIX es una marca registrada licenciada exclusivamente de X/Open Company, Ltd. en los Estados Unidos de América y en otros países. El resto de nombres de productos y compañías citados son marcas comerciales propiedad de sus respectivas compañías. Copyright Copyright 2003 by Canon, Inc. Todos los derechos reservados. ESPAÑOL Ninguna parte de esta publicación puede ser reproducida o transmitida de ninguna forma o con ningún método, electrónico o mecánico, fotocopias y grabación, o mediante ningún sistema de almacenamiento y recuperación de la información sin el previo consentimiento escrito de Canon Inc. viii Conectar el equipo 1 CAPÍTULO Este capítulo describe cómo conectar el equipo a un ordenador o red para poder imprimir con él. Configurar la conexión . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Flujograma de configuración . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Realización de conexiones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 ESPAÑOL Conexión a una red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Conexión a través de un interface paralelo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6 Conexión a través de un interface USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 1-1 Configurar la conexión Esta sección describe cómo conectar el equipo a un ordenador personal o a una red, y los tipos de conectores y cables que debe usar. Flujograma de configuración Conexiones Conecte los cables necesarios según su configuración. (Consulte las págs. 1-3 a 1-7.) Con el cable de interface Conexión a una red Configuración del entorno Introduzca la fecha y la hora, y las opciones del administrador del sistema para las operaciones de administración del sistema. (Consulte el Capítulo 1, "Antes de utilizar este equipo", en la Guía de Facsímil, y el Capítulo 4 , "Limitar el uso del equipo", en la Guía de Referencia.) Configuración de red ESPAÑOL Introduzca las opciones necesarias para la red y el servidor. (Consulte el Capítulo 2, "Usar una Red TCP/IP (Windows/UNIX)", en la Guía de Red.) Instalación del controlador de impresora Instale el controlador de impresora en los ordenadores personales. Instale las utilidades necesarias para su configuración de red. (Consulte el Capítulo 2, "Introducción", de la Guía del controlador PCL.) 1-2 Configurar la conexión Realización de conexiones Conecte el equipo a un ordenador o una red usando un cable de interface que admita comunicación bidireccional o un cable Ethernet 100Base-TX o 10Base-T. ADVERTENCIA Para evitar descargas eléctricas, desenchufe el cable de alimentación de la toma eléctrica antes de conectar un cable de interface o un cable de red. (Consulte el Capítulo 1, "Antes de utilizar este equipo", en la Guía de Referencia.) NOTA El equipo no se suministra con un cable de interface o un cable de red. Adquiera el cable correcto que sea compatible con su ordenador o su red. Conexión a una red El equipo dispone de un servidor de impresión interno compatible con una red TCP/IP, y le permite utilizar el equipo como impresora de red para UNIX y Windows. El servidor de impresión se suministra con un puerto 100Base-TX/ 10Base-T, que le permite conectarlo a una red local. Los ejemplo de conexión de esta sección le indican cómo conectar el equipo a una red según del tipo de red local. NOTA • El servidor de impresión de este equipo es compatible con redes NetWare. Para más detalles, consulte a su distribuidor local Canon. • El servidor de impresión de este equipo detecta automáticamente la conexión de interface 100Base-TX o 10Base-T. • Después de conectar el cable de red, lleve a cabo los siguientes procedimientos. Para conocer los detalles de cada procedimiento, consulte el correspondiente manual. - Instalar el controlador de impresora. (Consulte el Capítulo 2, "Introducción," de la Guía del controlador PCL.) - Configuración de fecha/hora y administración del sistema. (Consulte el Capítulo 1, "Antes de utilizar este equipo", en la Guía de Facsímil, y el Capítulo 4 , "Limitar el uso del equipo," en la Guía de Referencia.) Realización de conexiones 1-3 ESPAÑOL IMPORTANTE Para conectar el equipo a su red, necesita un cable de red local, un concentrador (hub) y el Kit de Impresora/Fax de red FAX-L2000. - Configuración del servidor de impresión y la red. (Consulte el Capítulo 2, "Empleo de una red TCP/IP (Windows/UNIX)," en la Guía de Red.) Conexión a una red 100Base-TX Conecte el cable 10Base-T/100Base-TX al puerto del hub mediante cable de red de pares trenzados de categoría 5 para su empleo en una red 100Base-TX. A continuación, conecte el cable 10Base-T/100Base-TX al Kit de red opcional situado en la parte posterior del equipo FAX-L2000/L2000IP. Si su ordenador no es compatible con una red 100Base-TX, necesitará también una tarjeta de red 100Base-TX. Ordenador con un puerto 100Base-TX Ordenador sin puerto 100Base-TX Tarjeta de red100 Base-TX Cable 100 Base-TX ESPAÑOL Hub 100 Base-TX Puerto 10Base-T/100Base-TX NOTA El hub, el cable de red y el Kit de red que se conecten a la red local deben ser compatibles con una red 100Base-TX. Para más detalles, consulte a su distribuidor local Canon. 1-4 Realización de conexiones Conexión a una red 10Base-T Conecte el cable 10Base-T/100Base-TX al puerto del hub mediante cable de red de pares trenzados de categoría 3 o superior para su empleo en una red 10Base-T. A continuación, conecte el cable 10Base-T/100Base-TX al Kit de red opcional situado en la parte posterior del equipo FAX-L2000/L2000IP. Si su ordenador no es compatible con una red 10Base-T, necesitará también una tarjeta de red 10Base-T. Ordenador con un puerto 10Base-T Ordenador sin puerto 10Base-T Tarjeta de red 10Base-T Cable 10Base-T Hub 10Base-T NOTA El hub, el cable de red y el Kit de red que se conecten a la red local deben ser compatibles con una red 10Base-T. Para más detalles, consulte a su distribuidor local Canon. Realización de conexiones 1-5 ESPAÑOL Puerto 10Base-T/100Base-TX Conexión a través de un interface paralelo Este equipo se puede conectar a un ordenador a través de un interface paralelo. Después de hace la conexión, instale el controlador de impresora y el software de utilidades suministrado que sea compatible con el sistema operativo de su ordenador. Para más información sobre la instalación del controlador de impresora y el software de utilidades, consulte “Instrucciones de instalación del software,” en la pág. 2-6. Conexión a un ordenador Windows La mayoría de los ordenadores IBM PC/AT y otros ordenadores compatibles con Windows contienen una conexión de puerto paralelo de impresora (compatible con IEEE 1284). Conecte un cable de impresora paralelo a la parte posterior de su equipo FAX-L2000/L2000IP, y al puerto de impresora de su ordenador. Software controlador de impresora Cable de impresora Puerto paralelo* Puerto de impresora ESPAÑOL * Conecte un cable Centronics de 36 contactos. Sujete los clips de ambos extremos. IMPORTANTE Si ha conectado un ordenador al puerto paralelo de este equipo, es posible que no pueda usar algunas utilidades de software. Para más detalles, consulte a su distribuidor local Canon. 1-6 Realización de conexiones Conexión a través de un interface USB Este equipo se puede conectar a un ordenador a través de un interface USB. Después de hace la conexión, instale el controlador de impresora y el software de utilidades suministrado que sea compatible con el sistema operativo de su ordenador. Para más información sobre la instalación del controlador de impresora y el software de utilidades, consulte “Instrucciones de instalación del software,” en la pág. 2-6. Conexión a un ordenador Windows Conecte un cable USB a la parte posterior de su equipo FAX-L2000/L2000IP, y al puerto USB de su ordenador. Software controlador de impresora Cable USB Puerto USB IMPORTANTE Si ha conectado un ordenador al puerto USB de este equipo, es posible que no pueda usar algunas utilidades de software. Para más detalles, consulte a su distribuidor local Canon. Realización de conexiones 1-7 ESPAÑOL Puerto USB ESPAÑOL 1-8 Realización de conexiones Instalar el software 2 CAPÍTULO Este capítulo describe cómo instalar el software contenido en el CD-ROM del software de usuario que se suministra con su equipo. Acerca del CD-ROM del software de usuario. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Contenido del CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 Requisitos del sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Instalar el software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 En Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Cuando el equipo está conectado a una red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5 Instrucciones de instalación del software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 ESPAÑOL Instalar el controlador de impresora PCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 Instalar Canon Font Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Instalar NetSpot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Instalar la utilidad de puerto LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8 Instalar el monitor de puerto NetBIOS/NetBEUI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Instalar DSE (Device Status Extension) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Instalar NDPS Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 Instalar el controlador de fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 2-1 Acerca del CD-ROM del software de usuario Esta sección ofrece una lista del contenido del CD-ROM y explica el software que debe instalar. Contenido del CD-ROM El CD-ROM contiene el software y la documentación que se indica a continuación: Driver Software ■ Acrobat Reader Instale este software para ver los manuales en línea. ■ Guía de impresora PCL Este manual en PDF contiene las instrucciones de la impresora PCL. ■ Guía del controlador PCL Este manual en PDF contiene la instalación e instrucciones del controlador de impresora PCL. ■ Guía del controlador de fax con Cover Sheet Editor Este manual en PDF contiene la instalación e instrucciones del controlador de fax y el editor de portadas. ■ Controlador de impresora PCL ESPAÑOL Este es un software esencial si desea imprimir desde aplicaciones Windows. Asegúrese de instalar este software. ■ Controlador de Fax Instale este software para poder utilizar la función de facsímil. ■ Font Manager 2000 Instale este software para administrar las 96 fuentes de pantalla que se incluyen en el CD-ROM. ■ Bar Code y OCR TTF Instale estas fuentes para que aparezcan correctamente en pantalla. 2-2 Acerca del CD-ROM del software de usuario NOTA • Para conocer los procedimientos de instalación detallados, consulte los manuales en PDF y los archivos léame.txt que se encuentran en la carpeta de cada programa del CD-ROM. • Los manuales en PDF pueden variar según el equipo FAX-L2000/L2000IP que tenga. Consulte los manuales en PDF específicos para su equipo. • Para acceder al menú del CD-ROM, introduzca el CD de Driver Software en su unidad CD-ROM ➞ haga doble clic en [FAXL2000.EXE]. Network User Software ■ Acrobat Reader Instale este software para ver los manuales en línea. ■ Guía de red (con el Kit de Red Canon opcional) Este manual en PDF contiene información detallada sobre la conexión del Kit de Red opcional a su red. ■ Guía de IU Remoto Este manual en PDF contiene información detallada para controlar el equipo a través de un navegador web. ■ Guía de Instalación Este manual en PDF (este manual) contiene información detallada acerca de la conexión de su equipo a una red y la configuración del entorno de red. ■ NetSpot NetSpot es el software que le permite ver en la pantalla de su ordenador el estado de cualquier equipo que esté conectado a un ordenador o red. Este software se puede usar en ordenadores Windows, Macintosh y UNIX. La utilidad de puerto LPR para Microsoft Windows 95/98/Me es el software que le permite imprimir desde ordenadores con Windows 95/98/Me en impresoras de una red TCP/IP. ■ Utilidad de monitor de puerto NetBIOS/NetBEUI La utilidad de monitor de puerto NetBIOS/NetBEUI para Microsoft Windows 95/98/Me es el software que le permite imprimir desde ordenadores Windows 95/98/Me en impresoras de una red NetBIOS/NetBEUI. ■ DSE (Device Status Extension) DSE es un software que le permite examinar la información sobre impresoras compartidas y administrar los trabajos de impresión mediante un navegador web. Este software únicamente se puede instalar en ordenadores Windows 2000/XP. Acerca del CD-ROM del software de usuario 2-3 ESPAÑOL ■ Utilidad de puerto LPR ■ Canon NDPS Gateway El software Canon NDPS Gateway configura las impresoras Canon para que funcionen en la arquitectura Novell NetWare NDPS (Novell Distributed Print Services). NOTA • Para conocer los procedimientos de instalación detallados, consulte los manuales en PDF y los archivos léame.txt que se encuentran en la carpeta de cada programa del CD-ROM. • Los manuales en PDF pueden variar según el equipo FAX-L2000/L2000IP que tenga. Consulte los manuales en PDF específicos para su equipo. Requisitos del sistema ESPAÑOL El CD-ROM está diseñado para su uso con ordenadores Windows 95/98/Me, Windows NT o Windows 2000/XP. 2-4 Acerca del CD-ROM del software de usuario Instalar el software Antes de imprimir, es necesario que instale los controladores de impresora y el software de utilidades. Cuando instale el software, tenga cuidado de instalar la versión correcta que sea compatible con el sistema operativo de su ordenador. IMPORTANTE Para conocer los detalles de los controladores de impresora y de la instalación del software, consulte el Capítulo 2, "Introducción", de la Guía del controlador PCL.. En Windows Para imprimir desde un ordenador Windows 95/98/Me/2000/XP o Windows NT, instale el controlador de impresora y el software de utilidades desde el CD-ROM suministrado. En el CD-ROM suministrado se incluye el siguiente software. ■ Controlador de impresora PCL Este es un software esencial si desea imprimir desde aplicaciones Windows. Asegúrese de instalar este software. ■ NetSpot ESPAÑOL Este software de utilidad de impresora le permite ver en la pantalla de su ordenador el estado de una impresora que esté conectada a un ordenador o red. Si configura la impresora y el Kit de Red, puede manejar la impresora desde el ordenador de igual forma que lo haría desde el panel de control de la propia impresora. Instale este software si lo necesita. Cuando el equipo está conectado a una red Instale el software de administración de red "NetSpot" que se suministra. NOTA • Cuando este equipo se conecte a una red, debe configurar el sistema operativo de red (NetWare, UNIX, etc.), y el Kit de Red opcional. Para realizar esta configuración, consulte el Capítulo 1, "Antes de comenzar", de la Guía de Red. • Cuando el equipo esté conectado a una red, imprima la lista "CONFIG EN IMPR" desde el MENÚ TEST para comprobar la dirección MAC del Kit de Red. A continuación, configure el sistema operativo de red (NetWare, UNIX, etc.), y el Kit de Red. Para más detalles, consulte el Capítulo 3, "Resumen de menús de impresora", de la Guía de impresora PCL. Instalar el software 2-5 Instrucciones de instalación del software Esta sección describe cómo instalar el controlador de impresora, el controlador de fax y el resto del software incluido el CD-ROM suministrado. NOTA • Para conocer los detalles de instalación del controlador de impresora, consulte el Capítulo 2 , "Introducción", de la Guía del controlador PCL. • Para conocer los detalles de instalación del controlador de fax, consulte el Capítulo 2 , "Introducción", de la Guía del controlador de fax. Instalar el controlador de impresora PCL IMPORTANTE En Windows NT o Windows 2000, inicie la sesión como administrador para instalar el controlador. Mediante el instalador 1 Introduzca el CD-ROM del software de controladores en la unidad CD-ROM. ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en las siguientes carpetas: [Drivers] ➞ [español] ➞ [prnsetup]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. ESPAÑOL 2 2-6 Siga las instrucciones que aparecen en pantalla para finalizar la instalación del controlador de impresora. Instrucciones de instalación del software Mediante el Asistente para agregar impresora 1 2 3 4 En el menú [Inicio], señale [Configuración] ➞ haga clic en [Impresoras]. En la carpeta [Impresoras], haga doble clic en el icono [Agregar impresora] para iniciar el Asistente para agregar impresora ➞ siga las instrucciones que aparecen en pantalla para continuar con la instalación. Inserte el CD-ROM del software del controlador de impresora en la unidad de CD-ROM ➞ haga clic en [Utilizar disco]. Haga clic en [Examinar] para seleccionar la carpeta del controlador que desea instalar ➞ haga clic en [Aceptar]. Puede seleccionar el controlador de las siguientes carpetas del CD-ROM. •PCL5e Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Ruta de acceso \Drivers\español\printer\pcl5e_5c\win9x_me \Drivers\español\printer\pcl5e_5c\winnt40 \Drivers\español\printer\pcl5e_5c\win2k_xp •PCL6 Ruta de acceso \Drivers\español\printer\pcl6\win9x_me \Drivers\español\printer\pcl6\winnt40 \Drivers\español\printer\pcl6\win2k_xp 5 Seleccione el modelo de su impresora en [Impresoras] ➞ haga clic en [Siguiente]. 6 Siga las instrucciones que aparecen en pantalla ➞ haga clic en [Finalizar] para comenzar a copiar los archivos. Instrucciones de instalación del software 2-7 ESPAÑOL Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP Instalar Canon Font Manager 1 Introduzca el CD-ROM de Driver Software en la unidad CD-ROM. ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en la carpeta [Canonfm] ➞ carpeta [English]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. 2 Siga las instrucciones que aparecen en pantalla para finalizar la instalación de Canon Font Manager. Instalar NetSpot Puede instalar NetSpot desde el CD de Network User Software. Para conocer las instrucciones sobre cómo instalar NetSpot, consulte la Guía de puesta en marcha de NetSpot en el mismo CD. v Instalar la utilidad de puerto LPR 1 Introduzca el CD-ROM de Network User Software en la unidad CD-ROM. ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en la carpeta [Lprport]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. ESPAÑOL 2 2-8 Siga las instrucciones que aparecen en pantalla para finalizar la instalación de la utilidad de puerto LPR. Instrucciones de instalación del software Instalar el monitor de puerto NetBIOS/NetBEUI 1 Introduzca el CD de Network User Software en la unidad CD-ROM. ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en la carpeta [Portmon]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. 2 Siga las instrucciones que aparecen en pantalla para finalizar la instalación del monitor de puerto NetBIOS/NetBEUI. Instalar DSE (Device Status Extension) 1 Introduzca el CD de Network User Software en la unidad CD-ROM. n ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en la carpeta [DSE] ➞ seleccione [Win2000] o [WinXP] ➞ haga clic en la carpeta [español]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. 2 Siga las instrucciones que aparecen en pantalla para finalizar la instalación de DSE. Puede instalar NDPS Gateway desde el CD de Network User Software. Para conocer las instrucciones sobre cómo instalar NDPS Gateway, consulte la Guía de usuario de NDPS Gateway en el mismo CD. Instrucciones de instalación del software 2-9 ESPAÑOL Instalar NDPS Gateway Instalar el controlador de fax IMPORTANTE En Windows NT o Windows 2000, inicie la sesión como administrador para instalar el controlador. Mediante el instalador 1 Introduzca el CD-ROM de Driver Software en la unidad CD-ROM. ❑ Haga doble clic en el icono [Mi PC] ➞ icono de la unidad CD-ROM. ❑ Haga doble clic en las siguientes carpetas: [Fax_Driver] ➞ [español] ➞ [faxsetup]. ❑ Haga doble clic en el icono [Setup.exe] para iniciar el proceso de instalación. 2 Siga las instrucciones que aparecen en pantalla para finalizar la instalación del controlador de fax. Mediante el Asistente para agregar impresora de Windows 1 2 ESPAÑOL 3 4 En el menú [Inicio], señale [Configuración] ➞ haga clic en [Impresoras]. En la carpeta [Impresoras], haga doble clic en el icono [Agregar impresora] para iniciar el Asistente para agregar impresora ➞ siga las instrucciones que aparecen en pantalla para continuar con la instalación. Introduzca el CD-ROM de Driver Software en la unidad CD-ROM ➞ haga clic en [Utilizar disco]. Haga clic en [Examinar] para seleccionar la carpeta del controlador que desea instalar ➞ haga clic en [Aceptar]. Puede seleccionar el controlador de las siguientes carpetas del CD-ROM. Sistema operativo Windows 95/98/Me Windows NT 4.0 Windows 2000/XP 2-10 Instrucciones de instalación del software Ruta de acceso \Fax_Drivers\español\fax\win9x_me \Fax_Drivers\español\fax\winnt40 \Fax_Drivers\español\fax\win2k_xp Seleccione el modelo de su fax en [Impresoras] ➞ haga clic en [Siguiente]. 6 Siga las instrucciones que aparecen en pantalla ➞ haga clic en [Finalizar] para comenzar a copiar los archivos. ESPAÑOL 5 Instrucciones de instalación del software 2-11 ESPAÑOL 2-12 Instrucciones de instalación del software CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON FRANCE S.A. 17,quai du President Paul Doumer 92414 Courbevoie Cedex, France CANON (U.K.) LTD. Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom CANON DEUTSCHLAND GmbH Europark Fichtenhain A10, 47807 Krefeld, Germany CANON ITALIA S.p.A. Palazzo L Strada 6 20089 Milanofiori Rozzano (MI) Italy CANON LATIN AMERICA, INC. 703 Waterford Way, Suite 400, Miami, Florida 33126, U.S.A. CANON AUSTRALIA PTY. LTD 1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia CANON SINGAPORE PTE. LTD. 79 Anson Road #09-01/06, Singapore 079906 CANON HONGKONG CO., LTD 9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong HT1-8012-000-V.1.0 C CANON INC. 2003