Autoheat C1250

Autoheat C1250
A flameless heat system that is faster
and safer than blowtorches, ideal for
many automotive uses
autoclimate
TM
Autoheat C1250
Electromagnetic technology
for fast and easier removal of
those tricky nuts and bolts
Powerful and easy to use
The Autoheat C1250 is a powerful handheld
induction power inverter that features an
ergonomically shaped, slip-resistant grip
and an ultra bright LED to illuminate the
working area.
The tool is faster and safer than a
blowtorch; it uses high frequency magnetic
fields to quickly heat metal without an open
flame. This approach greatly reduces the
possibility of collateral damage normally
associated with an open flame.
Used for all types of work
The Autoheat C1250 can be used for many
tasks; including removing bonded glass,
SMC panels, metal bond adhesives, vinyl
graphics and mouldings, as well as heating
steel or aluminium. Easy to use, the
The Autoheat C1250 also effortlessly
removes seized or rusty nuts and bolts.
Using the The Autoheat C1250 allows the
accident repairer to recycle and reduce
labour time by as much as 75%, saving
time and money. Additionally, because of
the electromagnetic technology no harmful
chemicals or solvents are required.
How the tool works
When an electrical current passes through
a wire, which is wrapped around a ferro
magnetic or conducting material, it forms
a high-frequency magnetic field. This
magnetic field then travels through a few
inches of space, such as plastic trim or
moulding, until it reaches the metal base.
Once this magnetic field reaches the metal,
it induces an electrical current, creating heat
from the inside out.
Autoheat C1250
Work near plastic and
sensitive areas of the
vehicle with the the
Autoheat C1250
✕
The Autoheat C1250 Features
•
Faster / Safer than a blowtorch
•
Heats ferrous metals, and other electrical conductors, with NO flame
•
Significantly reduces damage to plastic and rubber components
•
Eliminates unnecessary removal and install procedures
•
Releases hardware from thread lock compounds or corrosion
•
Removes vinyl graphics
•
Completely handheld
•
Ergonomic slip resistant gripping
•
LED light illuminates work surface
•
No need for expensive training
For more information
0345 50 50 900
Autoheat C1250
technical summary
Part no.
02503-0211
Power supply
220-240v AC
Work Area illuminated
LED light
supplied with:
One preformed 22mm coil
One preformed 19mm coil
One universal rope coil
Disclaimer
The contents of this publication are correct at time
of publication. Autoclimate Limited reserves the
right to vary, modify or change any of its products,
services or specifications including those described
or referred to in this publication at any time without
prior notice.
A robust carry case
Owners manual
Autoclimate Ltd
Head Office & Development Centre
37 Atcham Business Park
Shrewsbury SY4 4UG
Tel: 0345 50 50 900
Fax: 0345 50 50 901
[email protected]
www.autoclimate.com
autoclimate
TM
Document Ref: PGAHEAT v1.0 Mar 2013