XTRM SYSTEMS English2012
Transcription
XTRM SYSTEMS English2012
Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 The professional protection for civil, industrial, military tires Get more secure working conditions. The best asset to optimize your tire’s life. What is XTRM SYSTEMS®? XTRM SYSTEMS® is a preventative fluid which previously installed through the valve or the flank, allows the reduction of air loss from tires caused by punctures, porosity and bead leaks. Perforations from 4 mm or 1/6 inch up to 8 mm or 1/3 inch (according to the reference used) are immediately detected since XTRM SYSTEMS® is made with mobile rubber particles, expanded and active of different sizes. The formulation XTRM SYSTEMS® looks like a viscous cream of a dark grey colour that remains homogeneous inside the tire while it turns, creating an uniform layer on the tread area and/or flank and can be easily removed with water. XTRM SYSTEMS® is made of very dynamic chemical components, corrosion and rust inhibitors, bacteriacide, thermoconductive fluids and ethanediol ensuring the use of XTRM SYSTEMS® at temperatures between - 40ºC (-160ºF) up to 110ºC (246ºF). When sealing punctures and leaks, the expanded and active rubber particles detect and concentrate spontaneously ant the perforation site. XTRM SYSTEMS® is noncorrosive, non-flammable, non-explosive, non toxic (excluding swallowing) neutral and environmentally friendly. 1 Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 How does XtrmsSystems ® Tire Protection™ work inside the tire? 1. XTRM SYSTEMS® remains viscous on the tire’s internal side because its ingredients are combined to maintain the perfect blend of viscosity and fluidity inside the tire while driving. 2. The permanent mobility of XTRM SYSTEMS® inside the tire detects and corrects immediately any puncture, cut or air loss. 3. The rubber particles of XTRM SYSTEMS® agglutinate and vulcanize to “heal” the “wounded” area similarly than human blood coagulation. XTRM SYSTEMS® APPLICATIONS: XTRM SYSTEMS® Tire Protection™ has multiple applications that fit the needs of a wide range of industrial and professional pneumatic tires. Our targeted markets are the following: Civil Applications: 4Wheels, cars, mountain bikes, motorbikes, quads, etc. Public Works Substitution tires: industrial tires, telescopic handler, compactors, graders, loaders, etc. Slow Moving Logistic Vehicles: off-road trucks, tractors, vans, armoured vehicles, etc 2 Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 XTRM SYSTEMS® and the competition: ANTIPUNCTURE SPRAYS: aerosols used when the puncture occurs. Low cost products made out of latex with poor effectiveness, the anti-puncture sprays destroy seriously the internal tire structure, rims and metallic parts and can also be explosive. Normally, after using the anti-puncture spray tires are definitely damaged and the driver needs to use the spare tire anyhow. ADVANTAGES OF XTRM SYSTEMS®: without latex, it doesn’t damage tires or structures and rims remain protected. Tires can be eventually repaired by the traditional methods. SEALING PRODUCTS MADE FROM FIBERS: liquid products of different colours (green, yellow, blue) containing fibers and ethylene glycol. These products are all injected through the valve and contain short fibers of different origins, only fitted for the tread area. When rolling, the fibers develop into balls falling off the puncture. Costly, these products are normally imported. ADVANTAGES OF XTRM SYSTEMS®: its formulation containing active rubber, offers a high resistance to leaks and possesses a very rich and homogeneous texture while rolling, thus long-lasting effectiveness and lower cost. RUNFLAT SYSTEMS: the very exclusive runflat mechanical systems like Michelin’s Pax System or Hutchinson’s VFI include a reinforced elastomer built in a specific rim, allowing in case of puncture or air loss, to drive runflat slowly over the tread area. These systems are used in some limousines but also for military use and vehicles 4WD, 6WD, 8WD. 3 Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 ADVANTAGES OF XTRM SYSTEMS® the runflat systems are not the specificity of our company. However, we have launched and commercialize our new formulations since 2007 being compatible with the elastomers to be costly effective with these systems, boosting tire life on military and security tires. XTRM SYSTEMS® PRODUCTS: XTRM T3 & XTRM T6 These anti-punctures had a specific research to be totally compatible to the tire’s elastomers, rims, run flat systems, competition tires and have the benefit to be non-toxic & environment friendly. • XTRM® T3: specific for installation through the valve on tubeless and tube tires. Made out of small and medium particles of active rubber, XTRM® T3 is adapted to punctures and porosity up to 4 mm (1/6 inch) of diameter FOR THE PROTECTION OF THE TREAD AREA. • XTRM® T6: specific for installation through the flank on tubeless tires. Made out of medium and large particles of active rubber, XTRM® T6 is adapted to punctures and porosity up to 8 mm (1/3 inch) of diameter FOR THE PROTECTION OF THE TREAD AREA AND THE FLANKS. 4 Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 Packaging: Bottle 250 gr XTRM T3 Bottle 750 Gr XTRM T3 Drum 5 Kg XTRM T3 or T6 Drum 25 Kg XTRM T3 – T6 Injection syringue for XTRM T3 5 Last updated 10-01-12 LA FERME DES VIKINGS SARL Manufacturer and Distributor of XTRM SYSTEMS tire sealants 33 Rue de l’Eglise – 70360 Scey sur Saône - France Tél : +33 3 84 76 07 88 Fax +33 3 59 08 77 71 Mobile +33 6 74 97 92 80 Email [email protected] XTRM patents FR 04 09201 FR 06 03061 • MANUFACTURE: Turco Española SA under ISO 9001:2000 and aeronautic requirements. (ATECMA/QC/24281 Aerospace Suppliers Quality Systems Certification Procedure). NATO CODE KCY86 • • TECHNOLOGICAL PARTNERSHIP: CERTECH (Centre de Ressources Technologiques en Chimie, Seneffe, Belgique). Registered at the Anti-poison center under the number: 9886, BNPC (National Database of Products and Compositions of Nancy, France) ORFILA phone number: 0033 (0) 1 45 42 59 59. Distribution of our product range : 1. Military market, police and security forces, France, Israel, Congo 2. Public Works tires, industrial tires, renting companies. 3. We entrusted the Würth group for the distribution of XTRM SYSTEMS Business to Business in France. 6