P43 FLAT PROFILE WITH TBS NON-SLIP
Transcription
P43 FLAT PROFILE WITH TBS NON-SLIP
Page 1/3 Non-slip Inserts and Profiles P43 FLAT PROFILE WITH TBS NON-SLIP INDOOR Description PASSAGE has designed P43 flat aluminium profile for TBS non-slip adhesive tape x 30mm width. This flat stair tread ensures safe footsteps while giving high visual and tactile contrast on all stair nosings in new and old buildings a like. Applications : Indoors (non-slip tape): Stair nosing, indoor access steps Stairs, buildings, schools, colleges, universities Hotels, restaurants, shopping centres, department stores Hotels, restaurants, shopping centres, department stores Banks, administrative buildings Hospitals, retirement homes Accessibility in premises with public access Public transport Law texts Extract from the French legislation of the 30 November 2007 R.111-19-2 article 7-1, modifying the decree of 1 August 2006. Stairs must be used in secure by visually impaired people. The stairs nosing should be visually contrasted from the rest of the stairs, be non-slip and not to present any excessive overflow compared with the riser. Decree of December 8, 2014 - The nosing meet the following requirements : be visually contrasting with the rest of the steps to at least 3 cm in horizontal be non-slip Characteristics PASSAGE SAS, 1 rue du Coteau Moreau, ZI de l'Eperonnerie, 49290 CHALONNES SUR LOIRE, FRANCE Tél : +33 (0)2 41 72 35 25 - Fax : +33 (0)2 41 72 35 30 - E-mail : [email protected] www.passage-securite.com Version : Page 2/3 Non-slip Inserts and Profiles Profiles are not sold pre-drilled. Material : 6060t5 anodised aluminium x 20 microns thickness, total thickness 4 mm, tickness of the aluminium 20 mm adhesive strip available in three versions : Material Thickness (mm) Aspect Fire ranting Skid resistance (SRT pendulum) NF P98831-4 TBS19 TBS20s TBS21 Polyurethane elastomer on highly adherent adhesive film 1,9 2 2,1 Smooth Fine granules <400µ Medium granules 400-850µ BflS1 according to NF EN BflS1 according to NF EN CflS1 according to NF EN 14401 (LNE) 14401 (LNE) 14401 (LNE) dry : 93 dry : 90 dry : 104 under water : 33 under water : 66 under water: 61 Recommendation : Drill the section using a 4.5mm HSS drill bit. Fit with stainless steel countersunk screws 3.5mm diameter x length 20–25mm at 20cm spacings Dimensions : Packaging Dimensions 43 mm x 1 m 43 mm x 1,5 m 43 mm x 3 m Packaging 10 profiles 10 profiles 10 profiles PASSAGE SAS, 1 rue du Coteau Moreau, ZI de l'Eperonnerie, 49290 CHALONNES SUR LOIRE, FRANCE Tél : +33 (0)2 41 72 35 25 - Fax : +33 (0)2 41 72 35 30 - E-mail : [email protected] www.passage-securite.com Version : Page 3/3 Non-slip Inserts and Profiles Colours Slate C01 TBS21 Sienna C03 TBS21 Sand C04 TBS21 Blue C05 TBS21 Ivory C06 TBS21 Black C08 TBS21 Brown C09 TBS21 Express grey C10 TBS21 White C11 TBS21 Red C14 TBS21 Golf green C15 TBS21 Iceberg C21 TBS21 Pearl grey C23 TBS21 Yellow RAL1028 C24 TBS21 Tropical Grey C25 TBS21 Slate C01 TBS20S Sand C04 TBS20S Blue C05 TBS20S Ivory C06 TBS20S Black C08 TBS20S Brown C09 TBS20S Express grey C10 TBS20S White C11 TBS20S Red C14 TBS20S Golf green C15 TBS20S Tropical Grey C25 TBS20S Slate grey C01 TBS19 Express grey C10 TBS19 Yellow RAL1028 C24 TBS19 PASSAGE SAS, 1 rue du Coteau Moreau, ZI de l'Eperonnerie, 49290 CHALONNES SUR LOIRE, FRANCE Tél : +33 (0)2 41 72 35 25 - Fax : +33 (0)2 41 72 35 30 - E-mail : [email protected] www.passage-securite.com Powered by TCPDF (www.tcpdf.org) Version :