Airzone Tacto zone system
Transcription
Airzone Tacto zone system
REF: SISTPLT This system incorporates a new programmable master thermostat with a touch-screen. SPECIFIC CHARACTERISTICS OF THE AIRZONE TACTO SYSTEM It controls the operation of the air-conditioning installation in general and that of the zone in which it is located. · Wall-mounted digital thermostat with touchsensitive screen. · Programmable by weeks, days or groups of days. · Allows for the definition of up to three daily scenarios, with programmed activation and deactivation times and temperature set point. · Communication and power supply via Airzone type-A sixlead cable. · Available in two colours: An intuitive interface makes it extremely easy to use. It is recommended that this thermostat be installed in rooms that are used at regular times, such as bedrooms. . FUNCTIONS · Set-point control with a differential of ±32.9F.. · Set-point temperature selection at intervals of 32.9F and ranging from 59ºF. to 95ºF.. · Eco-sleep function: the set point varies during the first 2 hours of operation, rising by 32.9F every 30 minutes in the summer cycle and falling at the same rate in the winter cycle. · Auto-restore: in the event of an electrical cut, the system returns to its previous status when the electricity comes back on. Alpine white Discovery grey Touch-sensitive screen Eco-sleep function: set-point variation during the first 2 hours. Increase of 35.6ºF in the summer cycle and decrease of 35.6ºF in the winter cycle (32.9F every 30 minutes) Programmable by weeks, days or groups of days Permanent clock Zone temperature selection at intervals of 32.9F and ranging from 59ºF. to 95ºF. Three daily activation/deactivation schedules Zone 1 operation: AUTO-MAN-OFF System operation mode: FAN-COOLING-HEAT-STOP COMPATIBILITY · With all Airzone zones · With Airzone motorised diffusion · It is possible to use air-conditioning units of any make 25 ZONE SYSTEMS Airzone Tacto zone system