H7T31 2972 - Trelleborg Sealing Solutions

Commentaires

Transcription

H7T31 2972 - Trelleborg Sealing Solutions
MATERIAL- DATENBLATT / MATERIAL DATA SHEET
Compound-Nr.:
compound No.:
H7T31
Referenz-Compound-Nr.:
Reference-compound No
2972
Elastomerbasis
elastomere base
DIN ISO 1629
Härte
hardness
DIN 53 505
Farbe
Colour
Dichte
specific gravity
HNBR
70 +/-5 Shore A
grün / green
DIN EN ISO 1183-1
1,32 +/- 0,02 g/cm³
Das Werkstoff-Datenblatt befreit den Abnehmer / Anwender nicht selbst die Eignung unserer Ware für den
beabsichtigten Verwendungszweck zu prüfen. Das Datenblatt unterliegt nicht dem Änderungsdienst.
This is to emphasise that the customer himself is obliged to test the material with regard to its suitability in the
application. This data sheet has not a change of service.
Polymer Laboratory Stuttgart
Fax.: +49 711 7864 778
TSS.PolymerLabora[email protected]
erstellt am / issued:
2007-06-04
Unterschrift / signature:
gäb
FB-PLS-001/f 2007-04-02 Vers.4 kfu
WERKSTOFF-DATENBLATT / COMPOUND DATA SHEET
Compound-Nr.:
compound No.:
H7T31
October 2005
DATA SHEET
MATERIAL REFERENCE No. 2972
Hardness Range: 65 -75 IRHD
Trelleborg Dowty Malta material reference 2972 is based on a Hydrogenated Acrylonitrile-Butadiene
polymer (HNBR) and is designed to have improved low temperature flexibility.
Compound Key Properties include:
-
Colored Green for ease of identification.
Low temperature flexibility down to –40°C.
Heat resistance up to 150°C.
Resistant to mineral oils.
Resistant to Air Conditioning refrigerants (e.g. R134a) and PAG lubricants.
Resistant to Hot water / Steam.
Resistant to Ozone and Oxidative attack.
Projected service temperature range of -40 to +150°C which is dependant upon
medium to be sealed and conditions of service.
Possible Applications:
- Air Conditioning.
- Hydraulic / pneumatic Seals.
The information herein is accurate to the extent of our current technical knowledge. Trelleborg
Sealing Solutions Malta Ltd makes no warranty that the material is suitable for all applications.
Customers should undertake their own tests to ensure suitability for particular conditions of
operation.
Trelleborg Sealing Solutions Malta Ltd.
HF73, Industrial Estate, Hal Far BBG06, Malta.
Telephone - 21651293 Telefax – 22205246
Polymer Laboratory Stuttgart
Fax.: +49 711 7864 778
[email protected]
erstellt am / issued:
2007-06-04
Unterschrift / signature:
gäb
FB-PLS-001/f 2007-04-02 Vers.4 kfu
WERKSTOFF-DATENBLATT / COMPOUND DATA SHEET
Compound-Nr.:
compound No.:
H7T31
MATERIAL REFERENCE No. 2972
CLAUSES
UNITS
SPECIFICATION
Hardness
Tensile Strength
Elongation @ Break
Specific Gravity
IRHD
N/mm2
%
g/cm³
70 ± 5
10.0 min.
150 min.
1.32 ± 0.02
Compression Set:
22 hrs @ 150°C
%
30 max.
IRHD
%
%
+12 max.
-25 max.
-30 max.
IRHD
%
-5/+10.
±5
IRHD
%
-20 max.
+25 max.
°C
TBD
Physical Properties:
Heat Resistance:
70 hrs @ 150°C
Hardness Change
Tensile Change
Elongation Change
Fluid Resistance: ASTM No.1
70 hrs @ 150°C
Hardness Change
Volume Change
Fluid Resistance: ASTM IRM 903
70 hrs @ 150°C
Hardness Change
Volume Change
Low Temperature Retraction:
TR10
Note: 1) All tests were carried out on 2mm test sheets, except for compression set (buttons).
2) All tests carried out to ASTM procedure.
Polymer Laboratory Stuttgart
Fax.: +49 711 7864 778
[email protected]
erstellt am / issued:
2007-06-04
Unterschrift / signature:
gäb
FB-PLS-001/f 2007-04-02 Vers.4 kfu