Owners Manual

Transcription

Owners Manual
Split-Belt Treadmill
User’s Manual
06/2016 UM-SP-EN-00
Manufacturer
WOODWAY USA, Inc.
W229 N591 Foster Ct.
Waukesha, WI 53186
USA
Tel.:
Fax.:
E-mail:
Web:
1-262-548-6235
1-262-522-6235
[email protected]
www.WOODWAY.com
MY WOODWAY ________________________ (model name)
ARRIVED _______________________ (date)
WOODWAY SERVICE PROVIDER INFORMATION SHEET
NAME OF COMPANY _________________________________________________
CONTACT PERSON _________________________________________________
ADDRESS __________________________________________________________
__________________________________________________________
PHONE NUMBER ____________________________________________________
FAX NUMBER _______________________________________________________
MAJOR CITIES AND AREAS YOUR COMPANY SERVICES ___________________
___________________________________________________________________
___________________________________________________________________
Table of Contents
Table of Contents .......................................................................................................... 4
WOODWAY History........................................................................................................ 6
GETTING STARTED ...................................................................................................... 7
Important Safety Instructions ..................................................................................... 8
Earthing the System ................................................................................................ 12
Technical Data ........................................................................................................ 18
Mechanical Data...................................................................................................... 18
Electrical Data ......................................................................................................... 18
Treadmill Data ......................................................................................................... 18
Things to Consider Before Starting Exercise Program ............................................ 19
TREADMILL INSTALLATION ...................................................................................... 21
Erection Site ............................................................................................................ 22
Transport/Storage and Disposal .............................................................................. 22
Power Requirement................................................................................................. 23
Socket ..................................................................................................................... 23
TREADMILL DESCRIPTION ........................................................................................ 24
Split-Belt Details ...................................................................................................... 25
Product Labels ........................................................................................................ 26
Serial Number Placement ....................................................................................... 26
Treadmill Components ............................................................................................ 27
Running Surface...................................................................................................... 27
Transport System .................................................................................................... 27
OPERATING THE TREADMILL ................................................................................... 28
How to Use the Split-Belt – WOODAY Med-Pro Software ...................................... 29
Manual Workout ...................................................................................................... 30
Treadmill control parameters ................................................................................... 30
Programmable Workout .......................................................................................... 31
Preprogrammed Workout ........................................................................................ 33
Log In Mode ............................................................................................................ 34
Export Workouts ...................................................................................................... 35
Safety Features ....................................................................................................... 36
Emergency Stop Switch on Handrail: ...................................................................... 36
Emergency Abandonment ....................................................................................... 36
Current Limiting of the Belt Drive............................................................................. 36
Lifting System (Incline) ............................................................................................ 37
PREVENTATIVE MAINTENANCE ............................................................................... 38
Cleaning and Inspection .......................................................................................... 39
Lubrication ............................................................................................................... 40
Adjustments and Calibration ................................................................................... 40
UM-SP-EN-00
4
REPLACING PARTS .................................................................................................... 41
Outer Covering ........................................................................................................ 42
Drive Motor and Pulley ............................................................................................ 42
Drive Belt ................................................................................................................. 42
Handrail ................................................................................................................... 43
Running Surface...................................................................................................... 43
Individual Slats ........................................................................................................ 43
Bearing Guide ......................................................................................................... 44
Belt Roller Guide and Track Rollers ........................................................................ 44
Front and Rear Deflection Rollers ........................................................................... 44
End Switches .......................................................................................................... 45
Incline Motor ............................................................................................................ 45
WARRANTY INFORMATION ....................................................................................... 46
Warranty Information ............................................................................................... 47
Our Guarantee ........................................................................................................ 47
WRAP UP ..................................................................................................................... 48
Troubleshooting....................................................................................................... 49
Preventative Maintenance Log ................................................................................ 51
Numbers to Know .................................................................................................... 52
UM-SP-EN-00
5
WOODWAY History
WOODWAY’s history began in Germany in 1974. Willi Schoenberger, a technical
director in charge of planning a fitness center, noticed that the most important piece of
equipment, the treadmill, did not meet the most important requirements: a mechanically
sound machine that is designed to meet human needs.
He envisioned a comfortable surface that did not interfere with the natural biomechanics
of running or walking. Also, he wanted to design a transportation system which
eliminated the friction associated with the conventional (conveyor belt) treadmills. After
intensive research, and trial and error (and in cooperation with the Deutsche
Sporthochschule in Koln, Germany), Willi developed and patented a very unique and
revolutionary treadmill design.
In 1975, WOODWAY GmbH was founded in Weil am Rhein, Germany. The name
"WOODWAY" is derived from the German "Waldweg" (Wald = Wood and Weg = Way) –
the feel of running on a soft pine needle covered path in the forest.
In 1983, a manufacturing license was awarded to Sakai Medical, for the use of
WOODWAY technology in the Japanese marketplace.
In 1988, a U.S. license was granted to a small, but well-established manufacturing
company in Waukesha, Wisconsin. WOODWAY USA was formed when the U.S.
incarnation of the WOODWAY was developed and completed in 1990. WOODWAY
USA is very proud to be the primary manufacturer of WOODWAY Treadmills worldwide,
exporting treadmills each month to Germany and Japan for international distribution, in
addition to serving our domestic customers and clients.
Today, WOODWAY’s design and manufacturing facilities in the United States, Germany
and Japan make WOODWAY the largest specialized treadmill manufacturer in the
world. Constant enhancements in quality, design and function are shared and
implemented by all three WOODWAY manufacturers.
UM-SP-EN-00
6
1
Chapter
GETTING STARTED
IMPORTANT SAFETY INSTRUCTIONS
TECHNICAL DATA
THINGS TO CONSIDER
UM-SP-EN-00
7
Important Safety Instructions
A safety sign has been included with your treadmill. It is the responsibility of the
owner to post this sign in a visible area near the machine.
All WOODWAY Treadmills are built to the specifications and intended for both
commercial and residential use.
The main power switch is located near the location of the power cord. The switch
has “I” and “O”.
“I” Position: When the switch is in the “I” position the treadmill is turned on and
the belt is held tight, turn the display on to operate treadmill.
“O” Position: When the switch is in the “O” position the treadmill is turned off
and the belt is free moving.
WOODWAY Training Technique Advisory:
To maximize the benefit and safety of your treadmill training WOODWAY recommends
all users maintain proper running form and not shuffle their feet.
When servicing any piece of fitness equipment, basic precautions must be followed.
Familiarize yourself with all warnings, instructions and procedures concerning proper
care and maintenance of a WOODWAY treadmill. Instructions are found in this service
training manual and some also appear on labels and instructions on the treadmill itself.
DANGER – To Reduce the Risk of Electrical Shock

Read all instructions before using.

Do not modify the plug provided with the treadmill. It is equipped with a power cord
with a grounding plug. If it will not fit in the outlet, have a proper outlet installed by a
qualified electrician.

Never operate this appliance if it has a damaged cord or plug, if it is not working
properly or if it has been damaged. Refer servicing to authorized service agent

Do not use any adapters, especially ones without grounding provisions. To do so
could result in electrical shock.

Do not operate electrically powered treadmills in damp or wet locations.

Do not operate the heart rate monitor transmitter in conjunction with an electrical
heart pacemaker. The transmitter may cause electrical disturbances.
UM-SP-EN-00
8

Always unplug the treadmill immediately after using before cleaning or servicing.

Do not soak the treadmill surfaces with any liquid; use a sprayer or damp cloth.
Keep all electric components, such as the motor, power cord, and power switch
away from water.

Do not place any open liquid containers on any part of the treadmill. The use of sport
bottles with closeable tops is acceptable to be used.

Do not attempt to service your treadmill yourself if you feel at risk.

Always keep the running surface clean.
CAUTION 
Consult with your physician before beginning any exercise program, especially if any
of the following pertain to you: history of heart disease, high blood pressure,
diabetes, chronic respiratory disease, elevated cholesterol, smoke cigarettes, or
experience any other chronic disease or physical impairments.

Pregnant women should consult their physician before beginning an exercise
program.

If you experience dizziness, chest pains, nausea or any other abnormal symptoms
while utilizing the treadmill, stop immediately. Consult a physician before continuing.

A qualified mechanic should perform service or repair work. It is preferable that
mechanics have successfully completed our factory-authorized service school or
equivalent.

Fuses may only be replaced by fuses of the same time and rated output to provide
permanent protection from fire.
WARNING – To reduce the risk of injury to you and to others:

Set up and operate treadmills on a solid, level surface.

Use this appliance only for its intended purpose as described in the manual. Do not
use attachments not specified by the manufacturer

The treadmill should never be left unattended when plugged in. Unplug from outlet
when not in use and before putting on or taking off parts.
UM-SP-EN-00
9

Do not operate outdoors.

To disconnect turn all controls to off position then remove plug from outlet.

Connect this treadmill to a properly grounded outlet only. See Grounding
instructions.

Keep all loose clothing and towels away from the treadmill running surface. It is also
important that shoe laces do not extend past the bottom of the sole of the shoe.

Keep the area behind the treadmill clear and at least FOUR FEET from walls or
furniture.

Keep hands away from all moving parts.

Never leave children unsupervised around a treadmill.

Inspect the treadmill for worn or loose components prior to use. Tighten/replace any
worn or loose components prior to use.

Read, understand and test the emergency stop procedures.

ALWAYS USE THE EMERGENCY SAFETY LANYARD SUPPLIED WITH THE
TREADMILL! It can be clipped to an article of clothing while exercising. This is for
your safety in case an emergency arises.

WOODWAY treadmills are built to handle runners weighing up to 800 pounds at
speeds between 0-4 MPH and 550 pounds at speeds up to 18 MPH. A treadmill
running belt might not stop immediately if any object becomes caught in the belt or
rollers.

Care should be taken when mounting and dismounting the treadmill. Never mount or
dismount the treadmill while the running belt is moving. Use the handlebar or
handrails whenever practical.

Wear proper athletic shoes, such as those with rubber or high-traction soles. Do not
use shoes with heels or leather soles. Make sure no stones are embedded in the
soles.

Allow several minutes to bring your heart rate into the training zone shown
elsewhere in this manual. Walk slowly after your workout to allow your body time to
cool down and your pulse rate to decrease.

The safety and integrity designed into the machine can only be maintained when
the treadmill is regularly examined for damage and repaired. It is the sole
UM-SP-EN-00
10
responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed. Worn or damaged components should be replaced
immediately or the treadmill removed from service until the repair is made. Only
manufacturer supplied or approved components should be used to maintain and
repair the treadmill.
The following points must always be observed to protect from burns, electric shocks and
injuries:
1. Never leave the treadmill connected and running without supervision. Before
leaving the machine, stop it and disconnect it from the mains. To do so, switch all
control elements to STOP or OFF and then pull the plug out of the socket. This
procedure is always necessary when the treadmill is at a standstill and before
dismantling any parts.
2. The treadmill must be continuously monitored when used in the vicinity of
children or physically and mentally disabled persons.
3. The treadmill may only be used for the purposes described in this manual.
4. Never operate a treadmill with defective plug or cable or a running surface which
is damaged or not functioning correctly.
5. The cable should not come in contact with heating surfaces or sharp edges.
6. No objects of any kind may fall through the openings or onto moving machine
components. Also keep hands, hair, loose clothing, towels etc. away from the
moving treadmill.
7. Only qualified maintenance staff can carry out electrical and mechanical repair
work. Please contact your dealer, the Service Center, or the WOODWAY factory
directly. Only original spares may be used.
8. The treadmill must be connected to a correctly earthed socket. Please consult
the section on earthing the system.
UM-SP-EN-00
11
Earthing the System
The treadmill must be correctly earthed. In the event of a malfunction or failure of
components, the earthing device provides the route of least resistance for the electric
current, thus reducing the risk of electric shocks. The unit is equipped with a mains
cable with earthed plug. The plug must be connected to a suitable, correctly fitted and
earthed mains socket.
DANGER: The plug supplied with the treadmill should not be manipulated in any way. If
necessary, a suitable mains socket must be fitted by a qualified electrician. Adapters
may not be used because of the risk of electric shocks.
**Save these instructions
UM-SP-EN-00
12
Instructions de sécurité importantes
Un signe de la sécurité ont été inclus avec votre tapis de course. C'est la responsabilité
du propriétaire pour envoyer ce signe dans un endroit visible près de la machine.
Tous les tapis de course Woodway sont construits conformément aux spécifications et
destinés tant à usage commercial et résidentiel.
L'interrupteur d'alimentation principal est situé à proximité de l'emplacement du cordon
d'alimentation. Le commutateur a "I" et "O".
Position "I": Lorsque l'interrupteur est en position "I" du tapis roulant est allumé et que la
ceinture est maintenue solidement, tourner l'écran pour fonctionner sur tapis roulant.
Position "O": Lorsque l'interrupteur est en position "O" du tapis roulant est désactivé et
que la ceinture est libre de se déplacer.
Woodway formation technique consultatif:
Pour maximiser les avantages et la sécurité de votre entraînement sur tapis roulant
Woodway recommande à tous les utilisateurs à maintenir bonne et due forme en cours
d'exécution et non shuffle leurs pieds.
Lors de l'entretien toute pièce d'équipement de conditionnement physique, les
précautions de base doivent être suivies. Familiarisez-vous avec tous les
avertissements, instructions et procédures concernant les soins et l'entretien d'un tapis
roulant Woodway. Les instructions se trouvent dans cette formation, manuel de service
et certains apparaissent aussi sur des étiquettes et des instructions sur le même tapis
roulant.
DANGER - Pour réduire le risque de choc électrique
• Lisez toutes les instructions avant d'utiliser.
• Ne pas modifier la fiche fournie avec le tapis roulant. Il est équipé d'un cordon
d'alimentation avec une fiche de terre. Si elle ne tient pas dans la prise, faites
installer une prise adéquate par un électricien qualifié.
• Ne jamais faire fonctionner cet appareil si l'on dispose d'un câble ou une prise
endommagée, si elle ne fonctionne pas correctement ou s'il a été endommagé.
Reportez-vous au service de l'agent de service autorisé
• Ne pas utiliser toutes les cartes, surtout celles sans terre dispositions. Pour cela
pourrait provoquer un choc électrique.
• Ne pas faire fonctionner les tapis roulants électriques dans des endroits humides
ou mouillés.
UM-SP-EN-00
13
• Ne pas faire fonctionner l'émetteur moniteur de fréquence cardiaque en
conjonction avec un stimulateur cardiaque électrique. L'émetteur mai causer des
perturbations électriques.
• Débranchez toujours le tapis de course juste après avoir utilisé avant le nettoyage
ou l'entretien.
• Ne pas tremper le tapis roulant de surfaces avec un liquide, l'utilisation d'un
pulvérisateur ou un chiffon humide. Conservez tous les composants électriques, tels
que le moteur, cordon d'alimentation, et l'interrupteur éloigné de l'eau.
• Ne placez pas de récipients ouverts liquide sur n'importe quelle partie du tapis
roulant. L'utilisation de bouteilles de sport avec des sommets closeable est
acceptable pour être utilisé.
• N'essayez pas de réparer vous-même votre tapis de course si vous vous sentez en
danger.
• Toujours maintenir la surface de roulement propre.
ATTENTION –
• Consultez votre médecin avant de commencer tout programme d'exercice, surtout
si l'un des suivants se rapportent à vous: des antécédents de maladie cardiaque,
d'hypertension artérielle, le diabète, les maladies respiratoires chroniques, le taux de
cholestérol élevé, fument des cigarettes, ou une expérience toute autre maladie
chronique ou physique déficiences.
• Les femmes enceintes devraient consulter leur médecin avant de commencer un
programme d'exercice.
• Si vous éprouvez des vertiges, douleurs thoraciques, des nausées ou tout autre
symptôme anormal, tout en utilisant le tapis roulant, arrêtez immédiatement.
Consultez un médecin avant de poursuivre.
• Un mécanicien qualifié doit effectuer un service ou une réparation. Il est préférable
que les mécaniciens ont complété avec succès notre usine, l'école de service
autorisé ou l'équivalent.
• Les fusibles ne peuvent être remplacés par des fusibles de la même époque avec
une sortie pour fournir une protection permanente contre les incendies.
AVERTISSEMENT - Pour réduire le risque de blessures à vous et à d'autres:
• Mettre en place et exploiter des tapis roulants sur une surface solide et de niveau.
UM-SP-EN-00
14
• Utiliser cet appareil que pour son objectif tel que décrit dans le manuel. N'utilisez
pas d'accessoires non spécifiés par le fabricant
• Le tapis de course ne doit jamais être laissé sans surveillance lorsqu'il est branché
po Débranchez l'appareil lorsqu'il n'est pas utilisé et avant de mettre ou de retirer
des pièces.
• Ne pas faire fonctionner à l'extérieur.
• Pour débrancher son tour tous les contrôles sur la position OFF puis retirez la prise
de la prise.
• Relier cette tapis roulant à une prise correctement mise à la terre seulement. Voir
les instructions Grounding.
• Gardez les vêtements amples et des serviettes loin de la course sur tapis roulant
de surface. Il est également important que les lacets de souliers ne s'étendent pas
au-delà du fond de la semelle de la chaussure.
• Garder la zone située derrière le tapis roulant claire et pieds au moins quatre de
murs ou les meubles.
• Gardez les mains loin de toutes les pièces mobiles.
• Ne laissez jamais d'enfant sans surveillance autour d'un tapis roulant.
• Inspecter le tapis roulant pour les composants usés ou en vrac avant de les utiliser.
Serrez / remplacer les éléments usés ou en vrac avant de les utiliser.
• Lire, comprendre et tester les procédures d'arrêt d'urgence.
• TOUJOURS UTILISER LE CORDON DE SECURITE EN CAS D'URGENCE
FOURNIE AVEC LE TAPIS DE COURSE! Il peut être fixé à un vêtement pendant
l'exercice. Ceci est pour votre sécurité en cas d'urgence.
• Tapis de course Woodway sont construites pour gérer les coureurs pesant jusqu'à
800 livres à des vitesses comprises entre 0-4 km / h et 550 livres à une vitesse
allant jusqu'à 18 mph. Un tapis roulant courroie peut pas s'arrêter immédiatement si
un objet est pris dans la ceinture ou de rouleaux.
• Des précautions doivent être prises lors du montage et le démontage du tapis
roulant. Ne jamais monter ou démonter le tapis roulant alors que la courroie est en
mouvement. Utilisez le guidon ou les mains courantes autant que possible.
• Portez des chaussures de sport, tels que ceux de caoutchouc ou de semelles de
UM-SP-EN-00
15
traction élevé. N'utilisez pas de chaussures à talons ou les semelles de cuir.
Assurez-vous qu'aucun des pierres sont ancrés dans la plante des pieds.
• Autoriser plusieurs minutes pour apporter votre rythme cardiaque dans la zone
d'entraînement figurent ailleurs dans ce manuel. Marchez lentement après
l'entraînement pour permettre à votre corps le temps de se refroidir et votre pouls à
diminuer.
• La sécurité et l'intégrité conçus dans la machine ne peut être maintenue lorsque le
tapis roulant est régulièrement examiné et réparé. Il s'agit de la seule responsabilité
de l'utilisateur / le propriétaire ou l'exploitant de l'installation pour s'assurer que
l'entretien régulier est effectué. Les éléments usés ou endommagés doivent être
remplacés immédiatement ou le tapis roulant retiré du service jusqu'à ce que la
réparation est effectuée. Seul fabricant de composants fournis ou approuvés
devraient être utilisées pour entretenir et réparer le tapis roulant.
Les points suivants doivent toujours être respectées afin de protéger des
brûlures, des chocs électriques et les blessures:
1. Ne laissez jamais le tapis roulant connectés et le fonctionnement sans
surveillance. Avant de quitter la machine, l'arrêter et le débrancher du réseau
électrique. Pour ce faire, passer tous les éléments de contrôle pour arrêter ou OFF,
puis retirez la fiche de la prise. Cette procédure est toujours nécessaire quand le
tapis roulant est à l'arrêt et avant de démonter toutes les pièces.
2. Le tapis de course doit être surveillé continuellement, lorsqu'ils sont utilisés à
proximité des enfants ou des handicapés physiques et mentaux des personnes.
3. Le tapis de course ne peuvent être utilisées aux fins décrites dans ce manuel.
4. Ne jamais utiliser un tapis roulant avec prise défectueuse ou un câble ou un tapis
de marche qui est endommagé ou ne fonctionne pas correctement.
5. Le câble ne doit pas entrer en contact avec des surfaces de chauffage ou de
bords tranchants.
6. Pas d'objets de toute nature peuvent tomber à travers les ouvertures ou sur des
composants mobiles de la machine. Aussi gardez vos mains, cheveux, vêtements,
serviettes, etc loin de le tapis roulant en mouvement.
7. Seul le personnel d'entretien qualifié peut effectuer des réparations électriques et
mécaniques. S'il vous plaît contactez votre revendeur, le centre de service, ou à
l'usine Woodway directement. Seuls les pièces de rechange d'origine peuvent être
utilisés.
8. Le tapis de course doit être raccordé à une prise correctement mise à la terre. S'il
UM-SP-EN-00
16
vous plaît consulter la section sur le système de mise à la terre.
Mise à la terre du système
Le tapis de course doit être correctement mis à la terre. En cas de
dysfonctionnement ou de défaillance des composants, le dispositif de mise à la terre
fournit l'itinéraire le moins de résistance au courant électrique, réduisant ainsi le
risque de chocs électriques. L'unité est équipée d'un câble d'alimentation avec prise
de terre. La fiche doit être connectée à un convenable, prise de courant
correctement mis en place et mise à la terre.
DANGER: La fiche fournie avec le tapis roulant ne doit pas être manipulé d'aucune
façon. Si nécessaire, une prise de courant appropriée doit être installé par un
électricien qualifié. Adaptateurs ne peut être utilisée en raison du risque de chocs
électriques.
** Conservez ces instructions
UM-SP-EN-00
17
Technical Data
Mechanical Data
68” (L) x 43.5” (W) x 41” (H)
(173 x 111 x 104 cm)
Weight:
Approx. 690 lbs (313 kg)
Stand:
four (4) rubber feet
Maximum load-bearing capacity: 500 lbs (225 kg) running, 800 lbs (363 kg) walking
Speed range:
0 to 15 mph (0 – 24 km/h)
Incline range:
0 to 25%
Overall dimensions:
Electrical Data
Mains connection:
Motor:
Lifting motor:
Mains cable:
Main fuse:
208/230 V AC 20 A, 50/60 Hz
Qty *2 – 2hp continuous (5hp peak) brushless servo
AC motor
NEMA 6-20
10 A slow-acting fuses
Treadmill Data
General:
Running belt type
Slat hardness:
Running surface:
Color:
Support system:
Lateral play:
UM-SP-EN-00
Qty *2 - 60 slats, width 13.75” (35 cm) replaceable
rubber on aluminum support
approx. 40 Shore Hardness Type A
68” l x 27.5” w (173 x 70 cm)
White
Qty *2 - 114 ball bearings with 12 guide rollers
+/- 2 mm
18
Things to Consider Before Starting Exercise Program
CONSULT A PROFESSIONAL FITNESS TRAINER
It is advisable for all exercise beginners to consult a professional fitness instructor or
personal trainer to develop an overall fitness evaluation/wellness program before
starting an exercise routine.
CONSULT A PHYSICIAN
If you are over 40, have a history of heart disease, are overweight, or have not been
involved in any kind of exercise program for several years, it is recommended that you
see your physician as a precaution before engaging in a vigorous exercise program.
UNDERSTAND THE IMPORTANCE OF WARMING UP AND COOLING DOWN
It is important to warm up and cool down prior to and at the end of each work out,
respectively. Always try to incorporate a series of basic leg stretches before and after
each workout. Stretching provides the necessary flexibility to prevent sore muscles and
injury during daily activities.
LEARN HOW TO TAKE YOUR PULSE PROPERLY
To select the Fitness Level that is most suitable to exercise, it is important to correctly
determine your heart rate or pulse. To do this, it is recommended that you use a good
quality heart rate monitor. If you do not have a heart rate monitor, you can find your
pulse by placing your fingers on the underside of your wrist or either side of your throat.
While looking at the second hand on your watch, count how many heartbeats you feel
within fifteen (15) seconds. Multiply this number by four to get your Beats per Minute
(BPM). Your heart rate will be needed when you take the Self-Fitness Test.
KNOW YOUR MAXIMUM HEART RATE
To determine your maximum heart rate, subtract your age from 220 (general formula).
The difference is the approximation of your maximum heart rate, as used by the
American Heart Association and The American College of Sports Medicine. The only
way to determine your true maximum heart rate is to have a stress test administered by
your physician. The American Heart Association recommends that you have a stress
test done if you have any history of heart disease or if you are over the age of 40 and
beginning an exercise program.
During exercise, it is recommended that you not exceed 85% of your maximum heart
rate. Our programs are designed to keep your heart rate within your Target Zone. Your
Target Zone is an area between 60 and 75% of your maximum heart rate. Should you
find your heart rate above the 75% level, you have probably selected a Fitness Level
that is too high in that particular Fitness Program. You should either drop to a lower
intensity level in the same Fitness Program, or use a less stressful Fitness Program.
UM-SP-EN-00
19
Heart Rate Chart
AGE
MAXIMUM
HEARTRATE
HEART RATE
20
25
30
35
40
45
50
55
60
65
70
75
200 BPM*
195
190
185
180
175
170
165
160
155
150
145
60% OF
75% OF
MAXIMUM
MAXIMUM
HEART RATE
120 BPM
120
110
110
100
100
100
90
90
90
90
80
150 BPM
150
140
130
130
130
120
120
120
110
110
100
85% OF
MAXIMUM
HEART RATE
170 BPM
160
160
150
150
140
140
130
130
130
120
120
* BPM = Beats Per Minute
HOW OFTEN SHOULD YOU EXERCISE?
The biggest mistake made by people when starting an exercise program is that they try
to do too much too fast. Give yourself time to get into shape. Becoming reconditioned
also takes time. Either way, it will not happen overnight. Remember: the key is
consistency and duration of exercise, not intensity. Fitness experts recommend that you
start by exercising three to four days a week within your target heart rate for at least 20
minutes per session. Your ultimate goal should be to get yourself gradually to a level of
fitness where you can comfortably keep your heart rate in the Target Zone for 50 to 60
minutes four to five times a week.
WEAR PROPER WALKING/JOGGING SHOES
To help avoid getting sore feet and muscles, it is suggested that you invest in a good
pair of walking/jogging shoes. It is important to purchase a comfortable pair of shoes
with good heel and arch support. Also, remember to regularly replace old or worn out
shoes with new shoes.
STAY ACTIVE
Between workouts it is suggested that you simply stay active, eat well-balanced meals,
and drink plenty of water. The combination of these activities should enhance your
chances for a future of good health.
UM-SP-EN-00
20
2
Chapter
TREADMILL INSTALLATION
ERECTION SITE
TRANSPORT/STORAGE AND DISPOSAL
POWER CONSUMPTION
SOCKET
UM-SP-EN-00
21
Erection Site
In most cases, your WOODWAY treadmill will be delivered completely assembled.
Check immediately upon delivery for any signs of transport damage. Please report all
damage immediately to the transport company and to the factory.
The treadmill must be installed on a flat, sufficiently firm floor surface. When installed on
higher stories, ensure that the system is positioned as far as possible in the corner of
the rooms to ensure sufficient stability even when running at higher speeds. The
erection site must be as flat as possible to ensure minimum deflection of the frame.
The treadmill may not be erected directly on carpet with relatively long pile because of
the moving parts on the underside of the treadmill. If necessary, a suitable mat should
be placed under the treadmill. This prevents carpet from being caught up in the
treadmill, and also reduces wear on the carpet surface.
Transport/Storage and Disposal
DELIVERY:





The treadmill is heavy and can cause injury if lifted incorrectly.
Always use the supplied carrier poles if the treadmill is to be moved.
Never use the covers to lift or pull the treadmill. If a flat trolley is available, slide
the trolley under the treadmill and then move the treadmill to its new position.
If the treadmill has to be dismantled, the covers and railings can be taken down
for easier transport.
Do only store in closed or roofed over rooms.
DISPOSAL:
Note: The disposal has to be proceeded according to the national regulations each.
Refer to appropriate disposal enterprises.





The treadmill packing is to be supplied to recycling services.
The metallic parts of the treadmill are to be supplied to disposal of old-metal.
Plastic parts are to be supplied to recycling services.
Electric components and circuit boards are to be disposed as electronic scrap.
Rubber parts are to be disposed as special refuse.
UM-SP-EN-00
22
Power Requirement
The maximum power consumption of the treadmill when running at maximum speed is
20 A at 230 V AC. The unit must therefore be connected to a correctly earthed and
adequately fused mains socket, preferably a dedicated socket that is not used by any
other electrical appliances. If an extension lead has to be used, it must have the
following properties: at least 14 AWG, earthed, maximum length 10 feet.
Socket
The WOODWAY treadmill is supplied with a NEMA 6-20p as standard feature and can
therefore only be connected to a NEMA 6-20r receptacle.
UM-SP-EN-00
23
3
Chapter
TREADMILL DESCRIPTION
SPLIT-BELT DETAILS
TREADMILL COMPONENTS
DATA MONITOR
DESCRIPTION OF CONTROLS
SAFETY FEATURES
LIFTING SYSTEM (INCLINE)
UM-SP-EN-00
24
Split-Belt Details
68”
(173 cm)
Fully Adjustable Handrail
Height 29” – 41” (74 -104 cm)
Width 22”-41” (56 – 104 cm)
27.5”
43.5”
(70 cm)
(111 cm)
Model
Slat Running Surface Area
60 slats with 35-40 shore hardness
LxW
Overall Dimensions
LxWxH
Speed, infinitely variable
Independent control of left and right
running belt
Split-belt
68” x 27.5”
173 x 70 cm
Inclination, infinitely variable
Total Weight
0-25% (0.1 % increments)
690 lb
313 kg
800 lb
363 kg
Maximum Loading
UM-SP-EN-00
68” x 43.5” x 41”
173 x 111 x 104 cm
15 mph (0-24 km/h) (0.1 mph
increments)
0 - 25 km/h
25
Product Labels
Serial Number Placement
Each WOODWAY treadmill is assigned a serial number when built. Depending on the
year your model was built, it will have either a 7 – 8 digit alpha-numeric code, or a 9
digit numeric code. The serial number can be found in two different locations on the
treadmill. The serial number is on the main label located on the back of the display
board housing. It is also on the front left section of the treadmill frame.
The main label also includes information about your particular treadmill. It lists input
voltage and current, and the options and/or features of your treadmill. Please refer to
your packing slip or invoice or contact WOODWAY USA (1-800-WOODWAY) to
determine the features you may have ordered, if you are in doubt, with your treadmill.
NOTE-GROUNDING RELIABILITY
CAN ONLY BE ACHIEVED
WHEN THIS EQUIPMENT IS
CONNECTED TO AN
EARTH-GROUNDED
RECEPTACLE MARKED
"HOSPITAL GRADE"
Warning: Disconnect from supply
circuit before opening.
Attention: Débrancher circuit avant l'ouverture.
UM-SP-EN-00
26
Treadmill Components
Running Surface
The patented running surface consists of 60 individual slats (Qty*2) fitted on a set of
continuous toothed belts. The toothed belts engage in the front crown wheel and this in
turn engages in the drive motor. This makes it completely impossible for the treadmill to
slip.
The individual slats consist of two materials: a rubber surface, and an aluminum Tsection. This combination of approximately 3/8 (1.2 cm) rubber on aluminum T-sections
makes it "the softest treadmill in the world". The rubber surface is resilient and
considerably reduces vibrations. This, in turn, effectively reduces and delays the
occurrence of pain in the legs which frequently accompany long-term running.
The positive belt structure eliminates friction and warmth, thus increasing the service life
of the treadmill surface.
Transport System
The transport system consists of four support rails: four steel wire reinforced continuous
belt. The support rails with 114 ball bearings (Qty *2) support the running surface and
make an essential contribution to reducing wear and friction.
The four lateral continuous belts have several key functions: they hold the slats
together, transfer output to and from the motor to the runner, and reduce the surface
from slipping out to the left or right.
The four support rails consist of three main components: the support rail, individual ball
bearings and mounted roller guides. The smooth area of the lateral belts runs over the
ball bearings and roller guides. The support rails accommodate all ball bearings and
roller guides and distribute local load evenly across the whole running surface. The ten
roller guides support the running surface and prevent it from slipping out to the left or
right. The 57 individual bearings on each side also make an important contribution to
even distribution of load across the whole running surface.
The deflection rollers transfer the load to and from the motor and prevent the surface
from slipping through. The front deflection roller is equipped with an additional crown
gear used by the motor. All deflection rollers are equipped with heavy-duty bearings
which also reduce friction.
This unique transport system thus provides extremely low friction and can even be used
without external drive, simply by pushing the treadmill to get it started.
UM-SP-EN-00
27
4
Chapter
OPERATING THE TREADMILL
How to Use the Split-Belt – WOODAY Med-Pro Software
Manual Workout
Programmable Workout
Preprogrammed Workout
Log In Mode
Export Workouts
Safety Features
Lifting System (Incline)
UM-SP-EN-00
28
How to Use the Split-Belt – WOODAY Med-Pro Software
The Split-Belt MED-PRO software home screen provides users with four options. Select
the desired option by clicking on the appropriate tab.
Options:
Manual Mode: The user controls the speed and incline of the treadmill.
Programmable Mode: This mode allows for building custom workout programs. Each
program can be up to fifty stages long with independent time, speed, and incline. An
unlimited amount of programs can be written, stored, saved and easily modified.
Preprogrammed Mode: Select from pre-written programs for your workout.
Log In: Create individual user profiles for patients to log and track their progress.
UM-SP-EN-00
29
Manual Workout
The user manually selects their desired speed and incline.
Treadmill control parameters
Weight: Adjusting the patient’s weight will adjust the rate of caloric burn and METS
calculations.
Elevation: Adjusts the incline of the treadmill in increments of 0.1%t.
Both Speed: Controls the speed of both running surfaces simultaneously in increments
of 0.1 mph.
Left Speed: Controls the speed of the patient’s left hand running surface in increments
of 0.1 mph (when facing front of treadmill).
Right Speed: Controls the speed of the patient’s right hand running surface in
increments of 0.1 mph (when facing front of treadmill).
UM-SP-EN-00
30
Programmable Workout
After selecting Programmable Workout Mode, Select NEW if you wish to write a new
program. Or select OPEN if you wish to open a stored program that has been saved.
After selecting OPEN to open a saved program, select one of the saved programs.
Select WORKOUT to use that program. Select EDIT to edit that program. Select
DELETE to delete that program. Select CANCEL to back up.
UM-SP-EN-00
31
After selecting NEW, the program editor will open. The program editor will allow you to
build your own programs. Each program can be up to 50 stages long. Each stage can
have independent time, elevation, and speed. You have the ability to store an unlimited
amount of programs.
Building a program
1. Click on the NEW STAGE button for the desired number of stages for the program.
2. Click on the stage # you wish to program.
3. Select the time, elevation, and speed for that stage.
4. Click ADD DATA to program the highlighted stage.
5. Repeat 2, 3 and 4 until program is completely programmed.
6. Click SAVE to name and save your program. If you enter a password when naming a
program, you will need to remember that password to open that program.
DELETE STAGE is used to delete a stage.
DISPLAY GRAPH is used to display a graph of the program.
COPY STAGE/PASTE STAGE: Click on the stage # you wish to copy. Click COPY
STAGE. Click on the stage # you wish to paste to. Press PASTE STAGE to paste. You
may paste the copied stage into as many stages as desired.
UM-SP-EN-00
32
Preprogrammed Workout
Select one of the preprogrammed programs. Select WORKOUT to load the selected
workout. Select EDIT if you wish to edit the saved program. You may edit, rename, and
store a preprogrammed workout. Any modified programs will be stored the
Programmable Workout Mode.
Sample of an opened program:
UM-SP-EN-00
33
Log In Mode
Select a user from the list. Click LOG IN to be logged in. Your workout totals will be
compiled and may be viewed by logging in and clicking VIEW STATS.
Select CREATE USER to enter a new user. If you enter a password when entering a
new user, you will need to remember this password to log in. Entering a password will
restrict others from viewing/resetting your stats.
UM-SP-EN-00
34
Export Workouts
When intending to export workouts, create a log in account for the user and be sure the
“Record Data” option is checked. This assures each and every workout is recorded and
will prompt the save function.
To initiate the “Record Data” option, go to the View drop down tab and select “Option”
Open the Heart Rate Tab
Select “Record Data” checkbox
Now following every workout for user (logged in) a pop up box as shown below will
display the workout data in a text file. Save the text file in the desired location.
UM-SP-EN-00
35
Safety Features
CAUTION: USE EMERGENCY STOP SWITCH IMMEDIATELY IF PROBLEM ARISES.
ATTENTION: en cas d'urgence STOP immédiatement la commande si problème se
pose.
Emergency Stop Switch on Handrail:
The emergency stop switch (mushroom-shaped) is mounted beside the right handrail and
is to be used in an emergency. Pressing the emergency stop switch will interrupt the 230
V - mains supply and initiate an emergency stop. You can release the emergency stop
switch by raising the red mushroom head!
Emergency Abandonment
In emergencies the treadmill is abandoned in a different way. First jump straddle onto
the side-covers in order to let the running-surface move freely underneath the legs.
Then stop the treadmill with the normal stop or with one of the emergency stop devices.
Current Limiting of the Belt Drive
The treadmills are equipped with a current limit control function, which reduces power
consumption and increases safety. Main feature is the current limiter after time overflow.
This means, if the running belt is blocking for more than 10 seconds (this means the
motor current limit is exceeded) the motor current will be reduced to 6 A. This is always
recommended in case something gets caught in the belt so that the belt will stop
automatically. Once the current limit control has been triggered, the torque of the motor
is reduced to a minimum to prevent damage to the motor and electric system.
UM-SP-EN-00
36
Lifting System (Incline)
The Split-Belt treadmill is fitted with a lifting mechanism consisting of a rack and pinion
system, with a maximum incline angle of 25%. The lifting system is started by a DC
gear motor, with the drive power being transferred to a set of pinions by a chain and
chain wheel. These pinions raise and lower the treadmill by means of a gear and
toothed rack and are fitted with rubber feet, and absorb a large proportion of the weight
of the treadmill and the body weight of the running during an incline run.
The feedback system consists of two parts: the potentiometer unit and the end
switches. Resolution is 0.1% / degrees. Precision is +/- 0.4% / degrees.
The feedback potentiometer tells the data monitor where the lifting system is. The
potentiometer makes 6 revolutions.
The end switches limit the distance covered by the lifting system and are constantly in
use. The data monitor recognizes when the treadmill has triggered the 0% end switch.
UM-SP-EN-00
37
5
Chapter
PREVENTATIVE MAINTENANCE
CLEANING AND INSPECTION
LUBRICATION
ADJUSTMENTS AND CALIBRATION
UM-SP-EN-00
38
Cleaning and Inspection
Periodic cleaning and inspection of your WOODWAY treadmill will help to lengthen the
life while helping to keep it looking like new. With this preventative maintenance it will be
easier to spot problems that might not otherwise be found.
Below is a guideline of our recommended cleaning and maintenance intervals. If your
treadmill is located in a dirty environment or under heavy-duty use, cleaning and
inspection should be implemented more often.
Do not use abrasive brushes or cleaners, as they may scratch the paint and plastic
surfaces. Do not soak any surface; the sensitive electronics may be harmed.
CAUTION: Turn off treadmill and disconnect power cord before cleaning.
ATTENTION: Coupez le tapis roulant et débrancher le cordon d'alimentation avant
de nettoyer.
Weekly:
 Clean handrail, front display panel & cosmetic covers.
 Inspect power cord.
 Check overall condition of the treadmill.
 Move, and vacuum underneath the treadmill.
Every Six (6) Months:
 Vacuum inside the treadmill (unplug and remove cosmetic covers.)
 Inspect all nuts and bolts. Tighten any that are loose.
 Clean running surface.
 Spray running surface with anti-static spray.
 Check drive belt – replace if shredding or teeth are missing.
Yearly:
 Grease front and rear roller bearings.
 Change motor brushes every 20,000 miles
 With high-use applications change every 1 year
Seasonally:
 In autumn & winter remember that the dry climate in many regions of the country
will cause a greater static discharge to occur when the treadmill is used. Be sure
to spray the running surface with a staticide spray regularly to prevent static
shock to the treadmill users and to prevent interference with the treadmill’s
electronic systems.
UM-SP-EN-00
39
Lubrication
Bearings
Almost all of the bearings used in the treadmill are pre-lubricated and do not need to be
greased initially. On a yearly basis, the four (4) bearings located at the front and rear
shaft will need to be lubricated.
Running Belt
The teeth on the bottom of the running belt are pre-lubricated to aid in reducing noise.
There is no need to lubricate the teeth. If running belt is rubbing against the side of the
drive pulleys, then a small amount of grease (i.e. Molykote or equal) on the edges of the
belt slats will help reduce noise.
Drive Belt
As in the case of the running belt, the application of grease on the edge of the drive belt
is only needed to reduce belt squeak and should be used sparingly.
Incline System
The incline systems on WOODWAY treadmills are greased at the factory. If utilized for
many hours or in a very dusty environment, system will need to be checked. If needed,
apply a small amount of grease on chains and incline drive racks.
Note: Use a minimal amount of lubrication to prevent excess dirt and debris from
sticking to the machine after cleaning.
Adjustments and Calibration
Incline System
The Rack and Pinion style incline system is used in WOODWAY treadmills. The 15% &
25% incline systems use similar components and only differ in rack travel.
Running Belt
The running belt should not require adjustment. However, if the running belt or
associated parts have been changed, then belt tension should be checked and set at 8
½”.
Treadmill Mounting Feet – TOOLS NEEDED: 2 FT LEVEL, ¾ INCH WRENCH
If treadmill wobbles or seems unstable, mounting feet must be checked. Using the level,
check both ends of the treadmill. Loosen the tensioning nut and turn the foot until it is at
the correct level. Tighten the tensioning nut.
Note: When moving the treadmill the frame may flex. If treadmill seems wobbly, push
handrail to one side or the other, this may straighten frame without mounting feet
adjustment needed.
UM-SP-EN-00
40
6
Chapter
REPLACING PARTS
OUTER COVERING
MANUAL DISPLAY
DRIVE MOTOR AND PULLEY
DRIVE BELT
HANDRAIL
RUNNING SURFACE
INDIVIDUAL SLATS
BEARING GUIDE
BELT ROLLER GUIDES AND TRACK ROLLERS
FRONT AND REAR DEFLECTION ROLLER
END SWITCHES
INCLINE MOTOR
UM-SP-EN-00
41
Outer Covering
Removal:
Disconnect the treadmill from the mains and remove the two (2) large screws in the
outer covering using a cross-recess screwdriver. The covers can then be lifted up from
the frame of the treadmill.
Replacement:
Position the two outer coverings on both sides of the frame. Then tighten the large
screws. It is important to check whether the treadmill scrapes on the covering panels by
moving the surface backwards and forwards. If this is in fact the case, the screws must
be loosened again and the covers moved away from the surface.
Drive Motor and Pulley
The instructions are supplied with the new or replacement motor, pulley is included.
Drive Belt
Required tools: 2 ring fork wrenches 17, 17 / 10 socket nut, ratchet
Removal:
1. Mark the position of the right-hand bearing support. This bearing holds the front
shaft on the frame. Then measure the distance between the upper and lower part
of the treadmill belt (in the middle). This measurement is made exactly between
the inner edges of the belt teeth and the value is kept for future reference.
2. Unscrew the two screws of the bearing support, but DO NOT REMOVE.
3. Take the drive belt off the drive motor.
4. Remove the outer bearing screw and pull the drive belt out from under the
bearing support.
5. Replace the outer bearing screw and nut. The nut must sit firmly on the screw.
6. Remove the inner bearing screw and pull the drive belt out from under the
bearing support (alternatively, cut the old belt). Place the new drive belt under the
bearing support (with the teeth UPWARDS).
Replacement:
1. Install the inner bearing block. Remove the outer bearing block and pull the drive
belt out from the under the block. Then position the drive belt in the pulley on the
front shaft, checking that the teeth engage correctly. Then replace the screw and
all other parts.
2. Pull the front shaft using a rod or C clamp to pull the running belt tight. Measure
the clearance between the running surfaces and adjust the value noted above.
This should be approx. 20.5 cm (optimum running).
3. Screw the bearing block screws to approx. 50 foot pounds.
4. Check that the drive belt runs correctly in both pulleys and can be moved easily
in the middle by a width of 1 - 2 fingers.
UM-SP-EN-00
42
5. Then push the surface on by hand and ensure that it runs smoothly and is not
blocked anywhere.
6. Switch the treadmill on and let it run at the various speeds. If any unusual
vibrations or noises occur, switch the treadmill off and check the dimensions. If
the noises and vibrations persist, please contact your representative or the
factory.
7. Replace the outer covers.
Handrail
Removal:
1. Disconnect the treadmill from the mains and remove the outer covers.
2. Disconnect the cable coming out of the handrail.
3. Remove the two attachment screws at each side of the treadmill. Pull the
handrail out, ensuring that the cable harness (es) are not crushed or cut through.
Replacement: In reverse order of removal.
Running Surface
Repairs to the running surface system (running surface/deflection rollers) should only be
carried out by the WOODWAY customer service or following consultation with the
factory.
Individual Slats
Required tools: T20 TORX element: 10” extension and/or electric screwdriver
Removal:
1. Disconnect from the mains and remove the side covering. Turn the surface until
the defect slat is at the front underneath the appliance. (The screws are most
easily accessible in this position).
2. Remove the two screws and plates on either side. Then take the defect slat
crosswise off the belt.
WARNING: WHEN REPLACING THE SLAT; IT IS VITAL THAT NEW PARTS ARE
USED. IF THE OLD SCREWS ARE USED AGAIN THE NEW SLAT COULD COME
LOOSE FROM THE SURFACE AND CAUSE SEVERE INJURIES.
AVERTISSEMENT: Lorsque vous remplacez la lame; Il est vital que les parties
nouvelles sont utilisées. Si les vis OLD sont utilisés de nouveau la lame peut se
détacher NOUVEAU DE LA SURFACE ET MAT causer des blessures graves.
Replacement:
UM-SP-EN-00
43
1. Place the new slat crosswise on the lateral belt. Screw in two new screws on
either side. NOTE: All four (4) screws must be positioned in the slat before
tightening the individual screws.
2. Then mount the covers back in position.
Bearing Guide
Required tools: 17 socket wrench element with 3” extension; ½" wrench, 17 ring fork
wrench
Removal:
1. Remove the covers. See page 29.
2. Remove the bearing guide fastening screws.
3. Unscrew the threaded pins in the bearing sleeve.
4. Then pull the bearing guide from the side using an extractor device.
Replacement:
In reverse order of removal. Tighten the screws to approx. 54 foot pounds (screw the
studs tight).
Belt Roller Guide and Track Rollers
Required tools: 13 socket wrench element and wrench with 3" extension, 13 ring fork
wrench
Removal:
1. Disconnect the appliance and remove the protective covering from the side
concerned.
2. Remove the roller unit, screw and nut. Then install a new roller using the old
screw and nut. Tighten the screw and nut to 18.8 foot pounds.
Front and Rear Deflection Rollers
Repairs to the front and rear deflection rollers should be replaced by the WOODWAY
customer service or following consultation with the factory.
UM-SP-EN-00
44
End Switches
Removal:
1. Remove the right-hand side covering.
2. Disconnect the cable from the old end switch unit and install a new end switch
unit.
3. Remove the end switch and bracket.
Replacement:
Install the new end switch unit and then replace the side covering panels.
Incline Motor
Required tools: 10 mm socket wrench element or wrench
Removal:
1. Remove the side panels.
2. Loosen the motor cable and disconnect from the control unit.
3. Unscrew the four attachment screws of the incline motor and remove the motor.
4. Remove the motor screws and pull the motor out of the frame.
Replacement:
In reverse order of removal. (The screws of the incline motor are tightened to 12.3 foot
pounds)
UM-SP-EN-00
45
7
Chapter
WARRANTY INFORMATION
UM-SP-EN-00
46
Warranty Information
Frame
Medical Use
10 years
Track/Belt and
Motor
5 years
Parts
Labor
3 years
1 year
WOODWAY warrants that all products and accessories will be free from manufacturing
defects according to the applications/terms listed above. The warranty period
commences on the original date of purchase (with the exception of the running belt
component, which is warranted for a period of five years from the original date of
purchase). This warranty is given only to the original purchaser. This warranty does not
cover damage or equipment failure resulting from misuse, abuse, or failure to comply
with electrical codes. Further, this warranty shall not apply if there is any modification to
the products or accessories or if there is a failure to provide maintenance as outlined in
the Owner's Manual.
WOODWAY GIVES NO OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED.
THE WARRANTY OF FITNESS FOR A PARTICULAR USE IS HEREBY
DISCLAIMED.
The buyer's remedy for breach of the expressed warranties contained herein shall be
limited to the return of the product and accessories and repayment of the original
purchase price. Provided, however, at WOODWAY selection, it may repair and replace
the non-conforming goods or parts. WOODWAY shall not be liable for any incidental or
consequential damages.
Our Guarantee
WOODWAY guarantees the repurchase of WOODWAY treadmill products for a period
of up to four (4) years after original installation. A direct payment or credit toward the
purchase of a new WOODWAY of 20% of the purchase price of the treadmill will be
made to the owner of a WOODWAY treadmill. This guarantee is limited to the original
owner. Contact WOODWAY for further details.
UM-SP-EN-00
47
8
Chapter
WRAP UP
TROUBLESHOOTING
PREVENTATIVE MAINTENANCE LOG
NUMBERS TO KNOW
UM-SP-EN-00
48
Troubleshooting
If you are having problems with your treadmill, please be prepared with answers to the
following questions before calling our service center.
QUESTIONS:
 What is the make, model and serial number of your treadmill?
 What happened prior to the problem?
 Did the problem happen unexpectedly or did it progressively worsen over time?
 Was someone using the treadmill at the time the problem occurred?
 Was the treadmill in LOCKED or FREEWHEEL mode?
 Explain any other symptoms that you feel are relevant.
PROBLEMS:
1. No Display: If the treadmill’s display does not light up when powered up, check the
following items:
 Input power fuse – replace if blown
 Power coming out of wall outlet
 Check power with another piece of equipment (radio, fan, etc.). Check main fuse
or circuit breaker, move to another outlet.
 Is the treadmill plugged in?
 Is the safety magnet installed or positioned correctly? Try to reposition. Check all
connectors at circuit boards.
2. Belt Movement
 Is the safety magnet on?
 Is the display working properly?
 If the display works, and/or the incline works, unplug the treadmill and wait at
least 60 seconds before plugging it back in.
BELT TIGHT/HARD TO PUSH
 First, determine if display board is illuminated and/or if the incline system is
working. This information will help our service technician in advising you where
the source of the problem may be.
BELT BINDING
 Check for obstructions and remove if possible.
3. Incline Does Not Work
 Check for any noises from the incline motor (brake sticking/motor stalled)
 Check if Incline limit switches are tripped.
 Check for broken chain, or if chain has jumped off of any sprockets.
 Check if the potentiometer is adjusted correctly.
UM-SP-EN-00
49
4. Erratic or Blinking Display
 Probable causes: Low line voltage; too much load on the same line.
 Make sure treadmill is on a dedicated electrical circuit.
 Possible static problem / spray with staticide.
 Display power supply on Interface board is defective.
5. Squeaking Sounds: Possible causes:
 Noisy bearing(s). Try greasing or replacing the bearing.
 Drive belt rubbing against the drive pulley, try greasing the edge of the drive belt
with a little all purpose grease.
 Running belt rubbing against drive pulleys, try lightly greasing the teeth on the
drive shaft, and let the treadmill run at a slow speed for a couple of minutes to
spread grease evenly. (NOTE: Too much grease will make a mess and will
accumulate dust.)
 Check for a defective guide roller or Z roller bearing on the bearing rail, replace if
defective
UM-SP-EN-00
50
Preventative Maintenance Log
D ATE
UM-SP-EN-00
M AI NTEN ANCE PERFORMED?
BY
RESULT
51
Numbers to Know
Your Treadmill Seri al #(s):
Model/#
Model/#
Model/#
Model/#
Model/#
Model/#
Model/#
Model/#
Model/#
Model/#
(The serial number can be found on the back of the treadmill’s display board housing &
also on the front/left section of treadmill frame – side cover must be removed to locate
on the frame).
UM-SP-EN-00
52
800-WOODWAY ( 9 6 6 - 3 9 2 9 )
UM-SP-EN-00
53