Digital Patterns

Digital Patterns
Designed by
Steve Good
www.scrollsawworkshop.blogspot.com
Home of Scroll Saw Pattern Printer
[email protected]
Copyright Steve Good 2007
Hallow Vase
This is the theory behind creating the vase.
A video of the construction is
available on my blog.
1/4” Space
Side View
Rings moved down fit
under the outer ring.
19 degrees
I add 1 degree to the actual angle when
I cut the pattern. This compensates for the
thickness of the blade.
Set drill press table and scroll saw
table to 20 degrees.
Cut all concentric rings from this
pattern. Reverse and glue the stack
3/4” Thick
20 degrees
Story Stick
Set drill press table and scroll saw
table to 20 degrees.
Vase Top. You will only use the
outer four rings from this pattern.
3/4” Thick
Set drill press table and scroll saw
table to 20 degrees.
The shades piece will be flipped to
make the top of the vase.
You only need the shaded section.
3/4” Thick