LEBENSLAUF
Transcription
LEBENSLAUF
LEBENSLAUF DATCHEVA Name: Vorname: Maria Dimitrova Adressen: Dienstadresse: Privatadresse: Institute of Mechanics , Bulgarian Academy of Sciences, Acad. G. Bontchev Str., Bl.4 BG-1113 Sofia, Bulgaria E-mail: [email protected] Geburtsdatum: Staatsangehörigkeit: Familienstand: Kinder: Mladost I, bl.25, wh.A, ap.16 BG-1784 Sofia, Bulgaria phone: (+359 2) 877 04 97 3. März 1958, Pleven, Bulgarien Bulgarische verheiratet 2 Söhne, geboren 1985 und 1991 HOCHSCHULAUSBILDUNG UND AKADEMISCHE GRADE: 1982 – M. Sc. (with excellence), Department of Mechanics and Mathematics, Moscow State University, Moscow, Russia, Qualification: Mechanics (diploma work at the Department of Theory of Plasticity, supervisor: Prof. Shesterikov) 1989 – Ph.D. Department of Mechanics and Mathematics, Moscow State University, Moscow, Russia, PhD Thesis: “Creep Damage Constitutive Equations”, supervisor: Prof. Shesterikov 2006 – Habilitation: Senior Research Associate/ Docent (Associate Professor), Department of Solid Mechanics, Institute of Mechanics, Bulgarian Academy of Sciences FREMDSPRACHEN: English, Russian – fluent; German – reading good, writing elementary, French – elementary level Bulgarian – native speaker BERUFSERFAHRUNG Seit 1982 Institute of Mechanics, Bulgarian Academy of Sciences, research fellow Seit 1996 Department of Mathematics, University of Chemical Technologies and Metallurgy, Sofia, Bulgaria, Assistant Professor, part-time 01.03.01-01.09.01 01.10.01-31.01.07 MSM-DIG, University of Liege, Research Fellow Laboratory of Soil Mechanics, Bauhaus-Universität Weimar, Germany, Research Fellow Department of Solid Mechanics, Institute of Mechanics, Bulgarian Academy of Sciences, Senior Research Associate Part-time at Chair for Foundation Engineering, Soil and Rock Mechanics, Ruhr University Bochum Seit 01.02.2007 Seit 15.10.2010 1 ERFAHRUNG ALS LEHRKRAFT 1996-1999: Department of Mathematics, University of Chemical Technologies and Metallurgy, Sofia, Bulgaria, Assistant Professor, part-time, Mathematics and Mathematical Physics, (basic course) 2004 and 2005: Bauhaus-Universität Weimar, Germany. Lecturing within the European Summer Academy Program „Advanced Studies in Structural Engineering and CAE“, Weimar titled “Advanced Modelling in Soil Mechanics with Application to Geotechnical Problems”. 2005: Series of lectures for PhD students at the Laboratory of Soil Mechanics, BU Weimar, February-March 2005: Time dependent behaviour in geomechanics (creep; relaxation; rheology) 2006: Bauhaus-Universität Weimar, Graduate School on Structural Engineering, master program “Advanced Mechanics of Materials and Structures”, lectures “Constitutive Models” – compulsory module. 2007: Bauhaus-Universität Weimar, Graduate School on Structural Engineering, master program “Advanced Mechanics of Materials and Structures”, lectures “Constitutive Models” – compulsory module. STIPENDIEN UND ZUSCHÜSSE: 1994 – 3 months, Research Fellowship, Technical University, Aachen, Germany, (Prof. J. Betten) Anisotropic Damage Investigation of Materials during Cyclic Loading, supported by the European Community. 1996 – 2 months, DAAD Research Fellowship: Inelastic Behavior of Anisotropic Loading Type Sensitive Materials supported by Deutscher Akademischer Austausdienst and carried out under the supervision of Univ. -Prof. Dr. -Ing. J. Betten in Technical University, Aachen, Germany, 1999 – 12 months NATO Science Programme Advanced Fellowship, research project: Creep Damage Investigation of Rocks, provided in DIG, Civil Engineering Department, University of Liege, under the supervision of Prof. R. Charlier. 2004 – 2 years, HWP (Thuringia) fellowship, topic: “Constitutive modelling of unsaturated soil behaviour”, hosted by the Laboratory of Soil Mechanics, Bauhaus-University Weimar, supervisor: Prof. Schanz. 2007 – 3 months DAAD Guest-professor fellowship, Bauhaus-University Weimar 2010 – 8 months sabbatical stay at Ruhr University Bochum, supported by the Bulgarian National Science Fund. INTERNATIONALE WISSENSCHAFTLICHE ERFAHRUNG: 1991-1993 Joint project between the Technical University, Munich, Germany, and the Institute of Mechanics and Biomechanics - Bulgarian Academy of Sciences (BAS): Plastizitaet von pulvermetallurgischen Werkstoffen, 436 Bul--113/53/2 supported by the Deutsche Forschungsgemeinschaft. 1993-1995 Joint project between the Technical University, Munich, Germany, and the Institute of Mechanics- Bulgarian Academy of Sciences: Numerical Simulation of Powder Metal Forming Processes, supported by the Deutsche Forschungsgemeinschaft, Germany. 1997-1999 NATO Linkage Grant: Investigation of metal forming processes taking into account coupled effects, project co-director from a NATO country - Prof. O. Mahrenholtz, TU Hamburg-Harburg, from CP country - Prof. N. Bontcheva, Institute of Mechanics, Bulgaria. 1997-1999 Joint Research Project between BAS and Czech Academy of Science (Prof. Kafka, Prof. Sejnoha): Localization and damage during inelastic deformation. 2 2000-2001 EC RTD Project, Fifth Framework Programme EESD, “Mechanical behaviour of partially and multiphase saturated chalks. Fluid-skeleton interaction: main factor of chalk oil reservoirs compaction and related subsidence”. 2001-2003 Joint project between Institute of Mechanics – BAS and DIG, l’Institut de Mécanique et de Génie civil, Université de Liège (Prof. Charlier): Endommagement et rupture dans les géostructures, in the frame of CGRI/FNRS BAS scientific research programme. 2003-2005 NATO Cooperative Science and Technology Sub-Program: Collaborative Linkage Grants: 979541 “Coupled hydro-mechanical models with uncertainties and applications to environmental problems” - project co-director from a NATO country - Prof. T. Schanz, Bauhaus-Universutät Weinmar, Germany, from CP country - Dr. R. Iankov, Institute of Mechanics, Bulgaria. 2006-2007 NATO Program Security though Science Collaborative Linkage Grants CLG982064 “Hybrid Approach to Performance Based Seismic Design in Balkan Region” - project co-director from a NATO country - Prof. T. Schanz, Bauhaus-Universutät Weimar, Germany, from CP country - Dr. R. Iankov, Institute of Mechanics, Bulgaria. TEILNAHME AN PROJEKTEN, UNTERSTÜTZT VON DER DFG UND DEM BMBF (BRD) 2002-2006 Mechanisches Verhalten teilgesättigter Böden, Die Forschungsgruppe “Mechanik teilgesättigter Böden“ FOR444 (DFG) 2002-2006 Verschlusssystem mit Äquipotenzialsegmenten für die untertägige Entsorgung (UTD und ELA) gefährlicher Abfälle zur Sicherstellung der homogenen Befeuchtung der Dichtelemente und zur Verbesserung der Langzeitstabilität, AP 4 Numerische Modellierung (BMBF) MITGLIEDSCHAFT: Bulgarian Union of Scientists WISSENSCHAFTLICHE INTERESSEN Creep, multiaxial creep, creep rupture; damage mechanics, heterogeneous materials, homogenization, elasto-plasticity, porous materials, multisurface plasticity, visco-plasticity, materials with internal friction, finite element method, constitutive relations for unsaturated soils, kinematic hardening, inherent anisotropy, model identification (optimization) 3 VERÖFFENTLICHUNGEN (AUSWAHL): M. D. Dacheva, A. M. Lokoshchenko and S. A. Shesterikov, 1984, Model representation of the ultimate strain during creep, Journal of Applied Mechanics and Technical Physics, (Springer), Vol. 25, No. 4, 632 – 635 R. Yankov and M. Dacheva, 1992, Numerical examination of the process of damage in creep of metals, Materials Science (Springer), Vol. 28, No. 5, 429 - 432 Iankov R. and Datcheva M., 1992, Finite Element Investigation on the Coupled Creep Damage Problems, Proc. 1st National Congress on Computational Mechanics, Athens, Sep. 3-4, Vol.1, 87-94. Iankov R. and Datcheva M., 1992, Numerical Investigation of the Creep Rupture in Metals, Proc.ECF9 Reliability and Structural Integrity of Advanced Materials, Ed. S. Sedmak, A. Sedmak and D. Ruzic, Vol. 1, 487--492. Datcheva M., 1992, Creep Damage and Rupture of a Non Proportionally Loaded Solid Circular Torsion Bar, Jour. of Theoretical and Applied Mechanics, Sofia, No.1, 74—82. Bontcheva N., Iankov R., and M. Datcheva, 1994, Metal forming processes simulation by the finite element method. In B. Sendov, I. Dimov, and P. Vasilevski, editors, Proc. 3rd International Conference on Numerical Methods and Applications NM\&A -- O(h^3), Sofia,21--26 August 1994, 323--331 Datcheva M., and R. Iankov, 1995, Coupled Creep, Damage and Fatigue Investigation of Materials During Cyclic Loading, Proc. 1st International Conference on Mechanics of Time Dependent Materials, Ljubljana, Eds. I. Emri, W.G. Knauss, Publ. by SEM, USA, 276--279 Bontcheva N., R. Iankov and M. Datcheva, 1996, Behaviour of powder based materials with different tension and compression yield limits. Mechanical Res. Communications, Vol. 23, No. 5, 537-542 A. Baltov, M. Datcheva, R. Iankov, 1996, A New Approach to Determine the Yield Loci of Heterogeneous Media. Jour. Theoretical and Applied Mechanics, No 4, 13-19 Datcheva M., 1998, Inelastic Behaviour of Anisotropic Loading Type Sensitive Materials, Jour. Theoretical and Applied Mechanics, Vol. Vol. 28, No. 2, 96-104 Baltov A. and Datcheva M., 1998, Constitutive Equations for Time Dependent Behaviour of Loading Type Sensitive Materials – 5th European Rheology Conference, Portoroz, Slovenia, 92-95 Dacheva, M D; Shesterikov, S A; Yumasheva, M A., 1998, Damage in the case of a complex unsteady stressed state. Rossijskaya Akademiya Nauk, Izvestiya, Mekhanika Tverdogo Tela , No. 1, 44-47 Mahrenholtz O., N. Bontcheva, R. Iankov, M. Datcheva, 2000, Investigation of the Influence of Surface Roughness on Metal Forming Processes, Mechanics Research Communications, Vol. 27, No. 4, 393402 Datcheva M., Charlier R., Collin F., 2001, Constitutive Equations and Numerical Modelling of Time Effects in Soft Porous Rocks, Lecture Notes in Computer Science, Springer Verlag, Vol. 1988, 2001, 222-229 Datcheva M., 2001, Constitutive Modelling of Creep Behaviour of Chalk, Jour. of Theoretical and Applied Mechanics, Vol. 31, No.2, 53—64 Datcheva M., Schanz T., 2002, A Concept on Modelling of Anisotropic Expansive Soils, Digital Proc. 4th Workshop “Porous Media”, Blaubeuren - December 5-6, 2002 Datcheva M., Schanz T., 2003, Anisotropic Bounding Surface Plasticity with Rotational Hardening for Unsaturated Frictional Materials, J. Phys. IV France, Vol. 105, 305-311 Charlier R. , A.Baltov, M. Datcheva, F. Collin, 2003, Conditions for elasto-plastic strain localization in unsaturated soils, Jour. of Theoretical and Applied Mechanics, Vol. 33, No. 3, 61-78 Popova E., Datcheva M., Iankov R., Schanz T, 2003, Mechanical Models with Interval Parameters, Digital Proc. 16th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering , Gürlebeck, K., Hempel, L, and Könke, C. Eds, Bauhaus-Universität Weimar 4 Stoimenova E., Datcheva M., Schanz T., 2003, Statistical modelling of the soil water characteristic curve for geotechnical data, Proc. Mathematics and Informatics for Industry, {MII 2003} , 14-15-16 April, Thessaloniki, Greece, 2003, 356—366 Zimmerer M., Datcheva M., Schanz T., 2003, Assessment of a loading test on highly sensitive deformable soil, Proc. GTMM2003, Natau, Fecker&Pimentel Eds, 419-426 Spickermann A., Schanz T., Datcheva M., 2003, Analysis of a deep seated slope failure in the Alps, in Proc. Workshop AK 1.6 DGGT „Nachweise für Böschungen und Baugruben mit numerischen Methoden“, Bauhaus-Universität Weimar, Sriftenreihe Geotechnik, Heft 11, 47-57. Popova, E., Datcheva, M., Iankov, R. & Schanz, T., 2004, Sharp bounds for strains and stresses in uncertain mechanical models, in Lecture Notes in Computer Science, Vol. 2907, Springer Verlag, Heidelberg, 262-269 Stoimenova E, Datcheva M., Schanz, T., 2004 Application of two-phase regression to geotechnical data, Pliska Stud. Math. Bulgar, V 16, 245-257 Baltov A., Charlier R., Datcheva M., Collin F., 2004, Modelling of dynamic plastic strain, water pressure and temperature localizations in unsaturated soils, Journal of Theoretical and Applied Mechanics, Vol. 34, No. 4, 31-46. Stoimenova E, Datcheva M., Schanz, T., 2005, Statistical approach in soil-water characteristic curve modelling, Springer Proceedings in Physics , Vol. 94, 189—200 Spickermann A., Schanz T., Datcheva M., 2005, Numerical modelling of primary stress states in deep seated slope problems, presented at the 18th ABAQUS User’s Conference, May 18-20, Stockholm, Sweden, CD edition. Wenqing Wang, Datcheva Maria, Schanz Tom, Kolditz Olaf, 2006, A sub-stepping approach for elastoplasticity with rotational hardening, Computational Mechanics, Vol. 37, 266-278 Schanz Tom, Zimmerer Martin M., Datcheva Maria, Meier Jörg, 2006, Identification of constitutive parameters for numerical models via inverse approach, Felsbau - Rock and Soil Engineering, Vol. 24, No. 2, 11-21 Stoimenova E., Lins Y., Datcheva M., Schanz T., 2006, Inverse Modelling of Soil Hydraulic Characteristic Functions, 17th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, K. Gürlebeck and C. Könke (eds.) Weimar, Germany, 12–14 July 2006, http://euklid.bauing.uni-weimar.de/templates/papers/f105.pdf Dineva Petia, Datcheva Maria, Schanz Tom, 2006, BIEM for seismic wave propagation in fluid saturated multilayered media, in Numerical Methods in Geotechnical Engineering, ed. H.F. Schweiger, Proc. 6th European Conference on Numerical Methods in Geotechnical Engineering, 6-8 September 2006 – Graz, Austria, published by Taylor & Francis/Balkema, 257-265 Jörg Meier, Maria Datcheva, Tom Schanz, 2009, Identification of Obstacles ahead of Tunnel Face Applying Inverse Approach, Proc. EURO:TUN 2009, 2nd International Conference on Computational Methods in Tunnelling, Ruhr University Bochum, 9-11 September 2009, Aedificatio Publishers, ISBN 978-3-931681-95-1, 673-680 Long Nguyen Tuan, Maria Datcheva and Tom Schanz, 2009, Numerical Simulation and Back Analysis of Coupled Thermo-Hydro-Mechanical Behavior of Sand-Bentonite Mixture, 18th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering, K. Gürlebeck and C. Könke (eds.), Weimar, Germany, 07–09 July 2009, ISSN 1611 4086, http://euklid.bauing.uni-weimar.de/ikm2009/papers/uploads/203/2-final-man_184.pdf Ana Yanakieva, Maria Datcheva, Eugenia Stoimenova, 2009, Assessment of the influence of coated bar geometry on the pull-out bond, In E. Manoach, M. Datcheva & N. Pesheva Eds., Digital Proc. 11th National Congress on Theoretical and Applied Mechanics, 2-5.09.2009, Borovets, Bulgaria, ISSN: 1313-9665, paper ID 113 Jörg Meier, Maria D. Datcheva, Michael Moser & Tom Schanz, 2009, Identification of Constitutive and Geometrical Parameters for Slope Instability Modelling – Application to Mountain-Splitting Area Reutte/Tyrol (Austria), Austrian Journal of Earth Sciences, Volume 102/2, pp 81-89, ISSN 20727151 5