Jump-Start-Booster - KS

Transcription

Jump-Start-Booster - KS
DE
EN
Jump-Start-Booster
BOOSTER
12 V Batterie-Booster - mobiles Starthilfegerät 700 A
Hauptschalter
Klemmen werden stromlos angebracht, wodurch Kurzschlüsse vermieden
werden. Erst durch Betätigen des Hauptschalters fließt Strom durch die
Kabelklemmen.
Verpolungsschutz
Akustische Warnung bei Verpolung
•ideal für Benzin- und Dieselmotoren in PKW bis Transporter
•vollisolierte Polklemmen (1000A)
•integrierter Elektronikschutz
•Ladekontrollanzeige per Knopfdruck
•akustischer Warnton bei Verwechslung der Polarität
•1,6 m Kabellänge
•mit robustem 35 mm² Kabeldurchmesser
•Hauptschalter, stromlosen Anschluss an die Fahrzeugbatterie
•Ladegerät und Kabelsatz im Lieferumfang enthalten
•Kabelaufbewahrung bequem am Gehäuse
•schlagfestes Gehäuse mit gummierter Aufstellfläche
Elektronikschutz
Eingebaute Schutzschaltkreise minimieren das Risiko von Schäden an der
Fahrzeugelektronik.
Klemmen
Weitöffnende Kabelklemmen (1000A)
Klemmbacken und Litze aus Kupfer sichern bestmöglichen Spannungsfluss
Starke Federn für sicheren Halt
Vollständige Isolierung zum Schutz vor Kurzschlüssen
Akkus
Hochwertige Akkutechnik sichert lange Lebensdauer bei maximaler Leistungskraft
Ladegeräte
Optimal dimensionierte Automatik- Ladegeräte sorgen für hohe Akkuleistung bei
kurzer Ladezeit.
Ladekontrolle
Anzeige bequem per Knopfdruck über Voltmeter mit Farbcodierung
Kabel
Hochwertiges, flexibles Kupferkabel Ø 35 mm²
Länge 1,60 m - komportabler Anschluss
Aufbewahrung direkt am Gehäuse
550.1710
Gehäuse
Schlagfestes Gehäuse aus recyclingfähigem Kunststoff
Zusätzlich, gummierte Aufstellfläche
Leichte und kleine Geräte - Gutes Handling Booster 12V
1 x Akku 22Ah Booster 12/24V
2 x Akku 22Ah Technische Daten:
Batterie:
Startstrom:
Spitzen Spannung:
Kabeldurchmesser:
Ladegerät:
Automatic-Ladegeräte
12VDC / 4A
405,0
380,0
12 Volt / 22 Ah
700 A
2200 A
35 mm²
12V DC / 4 A
120,0 550.1711 550.1712 10,00
12 V + 24 V Batterie-Booster - mobiles Starthilfegerät
1400 A
•ideal für Benzin- und Dieselmotoren in PKW bis NFZ > 12 t
•vollisolierte Polklemmen (1000A)
•vollisolierte Batterieklemmen (1000A)
•integrierter Elektronikschutz
•Ladekontrollanzeige per Knopfdruck
•akustischer Warnton bei Verwechslung der Polarität
•1,6 m Kabellänge
•mit robustem 35 mm² Kabeldurchmesser
•Hauptschalter, stromlosen Anschluss an die Fahrzeugbatterie
•Automatik-Netzladegerät und Kabelsatz im Lieferumfang
enthalten
•Kabelaufbewahrung bequem am Gehäuse
•schlagfestes Gehäuse mit gummierter Aufstellfläche
Technische Daten:
Batterie:
Startstrom:
Spitzen Spannung:
Kabeldurchmesser:
Ladegerät:
550.1720
405,0
380,0
2 x 12 Volt / 22 Ah
1400 / 700 A
4400 / 2200 A
35 mm²
12V DC / 4 A
180,0 550.1721 550.1722 18,00
165
Housing 12 V
Booster
1 x battery 22 Ah
Impact-resistant
housing
of recyclable plastic
Additional rubberised base area
Light and small tools - Good handling Jump-start booster
BOOSTER
12 V battery booster - mobile starting aid 700 A
Master switch
Terminals are connected power-free, thus avoiding short-circuits. Power flows
through the cable clamps only when the master switch is turned on.
Pole reversal protection
Acoustic warning if polarity is reversed
•Ideal for IC and diesel engines from cars to transporters
•Fully insulated terminal clamps (1000 A)
•Integrated electronics protection
•Charge control indicator at press of button
•Acoustic warning if polarity is reversed
•1.6 m cable length
•with sturdy 35 mm² cable diameter
•Master switch, power-free connection to the vehicle battery
•Charger and cable set included in scope of supply
•Cable can be conveniently stored on the housing
•Impact-resistant housing with rubberised base area
Electronics protection
Integrated protection circuits minimise the risk of damage to the vehicle electronics.
Clamps
Wide opening cable clamps (1000 A)
Copper clamping jaws and cable strands ensure the best possible voltage flow
Strong springs for secure clamping
Complete insulation as protection against short-circuits
Batteries
High-quality battery technology ensures long service life with maximum power
output
Chargers
Optimally dimensioned automatic chargers ensure high battery power with short
charging times.
Charge indicator
Convenient display at the press of a button via voltmeter with colour coding
Cables
High-quality, flexible copper cables dia. 35 mm²
length 1.60 m - convenient connection Storage directly on the housing
550.1710
405.0
12 Volt / 22 Ah
700 A
2200 A
35 mm²
12V DC / 4 A
380.0
120.0 550.1711 550.1712 10.00
12 V + 24 V battery booster - mobile starting aid 1400 A
Housing
Impact-resistant housing of recyclable plastic
Additional rubberised base area
Light and small tools - Good handling Booster 12V
Booster 12/24 V
2
x battery 22 Ah 1 x battery 22Ah Technical data:
Battery:
Starting current:
Peak voltage:
Cable diameter:
Battery charger:
•Ideal for IC and diesel engines from cars to HGV > 12 t
•Fully insulated terminal clamps (1000 A)
•Fully insulated terminal clamps (1000 A)
•Integrated electronics protection
•Charge control indicator at press of button
•Acoustic warning if polarity is reversed
•1.6 m cable length
•with sturdy 35 mm² cable diameter
•Master switch, power-free connection to the vehicle battery
•Automatic mains charger and cable set included in scope of
supply
•Cable can be conveniently stored on the housing
•Impact-resistant housing with rubberised base area
Automatic-chargers
12VDC / 4A
Technical data:
Battery:
Starting current:
Peak voltage:
Cable diameter:
Battery charger:
550.1720
405.0
2 x 12 Volt / 22 Ah
1400 / 700 A
4400 / 2200 A
35 mm²
12V DC / 4 A
380.0
180.0 550.1721 550.1722 18.00
165