Le groupe SOCOTEC, acteur majeur de la maîtrise des risques et de

Transcription

Le groupe SOCOTEC, acteur majeur de la maîtrise des risques et de
Le24mai2016
Le groupe SOCOTEC, acteur majeur de la maîtrise des risques et de l’amélioration des
performances, présentera aux acteurs du nucléaire l’ensemble de sa gamme de solutions lors du
2èmesalondunucléaireWorldNuclearExhibitionWNEdu28au30juinàParis-LeBourget.
Fort de son engagement pour la sûreté et la performance des grands projets et installations nucléaires,
depuis près de 40 ans, SOCOTEC accompagne les acteurs du secteur - EDF, AREVA, CEA, CERN, Andra -, en
France et à l’international, tout au long du cycle de vie de leurs installations: études en amont des projets,
constructionetaménagement,exploitationetmaintenance,démantèlement.
PendantlesalonWNE,leséquipesduGroupeopérantdanslesecteurdunucléaireserontprésentessurle
standSOCOTEC2B-E90/F89pouraccueillirl’ensembledesacteursdelafilière-opérateurs,équipementierset
prestataires-etleurproposerlesmoyensd’optimiserlaperformancedesinstallationsenmatièredesûreté,de
conformitéetdefiabilité.
Présent sur l’ensemble des centrales nucléaires françaises et sites de stockage de déchets, SOCOTEC y
développelesprestationssuivantes:
-
-
-
-
Calculsetsimulationsnumériques:
Expertise pour dossiers de sécurité ou de sûreté nucléaire, recherche et développement, validation des
projets,vérificationdesnotesdecalcul.
AssistanceàMaîtrised’Ouvrage:
Assistance technique et expertise, surveillance et suivi de travaux, inspection visuelle structures et
ouvrages,évaluationdelasûreté,gestiondeprojets.
Contrôletechnique-Analysesdesrisques-Avissurlesdossiersréglementaires(ICPE,IOTA,PC,…)
InspectionsetContrôlesNonDestructifs:
QA/QC, expediting, métrés, inspections de conformité, qualification des soudeurs et des modes
opératoiresdessoudeurs.
ContrôletechniqueTravaux-Assistanceauxopérationsderéception
Formationnucléaire:
Formations communes des intervenants du nucléaire, formations sécurité, formations en maintenance
industrielle,assistance,conseil,audit,gestiondosimétrique(PersonneCompétenteenRadioprotection).
Dessavoir-fairereconnusenFranceetàl’international
Au travers de ses différentes structures et équipes dédiées (SOCOTEC Power Services, SOCOTEC Formation
Nucléaire, CTE Nordtest, DEMA et les agences du réseau SOCOTEC France), SOCOTEC est présent dans
l’ensembledescentralesnucléairesfrançaisesetsurdessitesd’exploitationdel’Andra.Al’international,le
groupeintervientenFinlande,enAfriqueduSudetenChine.S’appuyantsurlaréactivitéetlescompétences
de400 ingénieurs et techniciens spécialisés,enrichiesparuneanalyseconstanteduretourd’expérience,il
réalisedanscesecteurunchiffred’affairesdeprèsde40M€etsepositionnecommeunacteurmajeurdela
maîtrisedesrisquesetdel’améliorationdesperformances.
AccréditationCOFRAC(inspection,mesuresenvironnementales…),CertificationISOetCEFRI,ISO9001/2008,
AccréditationISO17020,EDF/UTOEND-CNDcas1,MASE/UIC,CEFRIE,Membredel’ASAP,Autorisationà
traiterdes«ContratsSensibles»duMinistèredelaDéfense,AlstomQualificationNiveau1sansréserve…,
SOCOTECs’appuienotammentsurplusde150spécialistesenContrôlesNonDestructifstouscertifiésCOFREND
(niveaux1,2et3).
ParmilesprestationsréaliséesparSOCOTEC:
-
Contrôletechniquedesétudesd’avant-projetducentredestockagegéologiqueprofondCigéo(Andra)
-
RéalisationdemissionsdecalculpourleCEA,l’IRSN,AREVAetsesfilialesainsiquel’Andra,notamment
pourleprojetCigéo.
-
Inspectionousuividetravauxsurlessitesdel’EPRàFlamanvilleetceluid’IteràCadarache.
-
Prestationsdecontrôletechniqueetdequalificationd’ESPvisantàqualifierlesmaquettesderéacteurs
enbétonprécontraint,auregarddelaréglementationsurleséquipementssouspression.
-
Contrôlesouessaisnondestructifs,enparticuliersurdeséquipementssituésdanslebâtimentréacteur
(Cuves,RGV,Canneschauffantes,END,Arbresdepompesprimaires).Présenceenphasestravauxneufs
notammentsurl’EPRdeFlamanville,leréacteurRJHetleprojetITERsituésàSaint-Paul-lez-Durance.
-
Prestations de contrôle périodiques, vérifications initiales et/ou de mise en service en levage,
électricitéetfoudresurlesplaquesénergétiquesCOREST,CIVAR,CAUX-MANCHEetATLANTIQUE:CNPE
deFessenheim,Cattenom,Chooz,Bugey,Tricastin,Cruas,Golfech,BlayaisetPenly.
-
ActivitésliéesauzonageATEXetàlafoudre(CNPEdePenly).
-
Formation nucléaire à partir de 6 centres en France - Blyes, Bollène, Dieppe, Dunkerque, Lagnieu et
Saint-Genis-Pouilly-avec5chantiersécolesRadioprotectionetpréventiondesrisques,3chantiersécoles
1
2
SCN–CSQ et1chantierécoleagrééARC situéàDunkerque.
1
2
SCN–CSQ:SavoirCommunduNucléaire–ComplémentSûretéQualité
ARC:AdapteretRenouvelerlesCompétences
AproposdeSOCOTEC
Auservicedesentreprisesdepuisplusde60ans,SOCOTECabâtisaréputationentantqu’organismetiercepartie
indépendantedanslesdomainesdelaqualité,delasécurité,delasantéetdel’environnement.
Développantuneoffredeserviceseninspectionetmesure,assistanceetconseil,certificationainsiqueformation
auprèsdesentreprisesdetoussecteurs,SOCOTECcontribueàl’optimisationdeleursperformancesparlamaîtrise
desrisquesinhérentsàleursactivités.
Avec un chiffre d’affaires consolidé de 516 M€, une présence dans 50 pays, 200000 clients, 5 200 collabo-
rateurs, plus de 170 reconnaissances externes et un réseau de 200 implantations en France dont 34 centres de
formation,legroupeSOCOTECestunacteurmajeurdelapréventiondesrisques.
Plusd’informationssurwww.socotec.com
AproposduWorldNuclearExhibitionWNE
er
Créeàl’initiativedl’AIFENAssociationdesindustrielsfrançaisexportateursdunucléaire,WNEestle1 salon
biennalinternationaldunucléairecivilenFrance.Ilapourambitiondepermettreauxacteursd’uneindustrie
à forte valeur ajoutée d’échanger, de nouer des partenariats, de chercher de nouveaux fournisseurs et de
développerleuractivitéàl’export.
Plusd’informationsurwww.world-nuclear-exhibition.com
ContactPresse:AgenceWeFEED-RelationsPresse
PatriciaDeckmyn-Tél.:[email protected]
24 May 2016
The SOCOTEC Group, a leading name in risk management and performance improvement, is to
present its entire range of services to the nuclear industry at the second World Nuclear Exhibition
(WNE) taking place in Paris-Le Bourget from 28 to 30 June.
In our committed pursuit of advancing safety and performance at major nuclear projects and facilities,
SOCOTEC has stood alongside French and international industry operators such as EDF, AREVA, CEA, CERN and
Andra for nearly four decades. We support them throughout the life cycle of their facilities, from preliminary
project studies through construction and development, operation and maintenance, to decommissioning.
Our specialist nuclear teams will be at SOCOTEC’s stand (2B-E90/F89) in the WNE, ready to welcome decisionmakers active in all nuclear fields – operators, equipment suppliers and service providers – and offer proposals
for optimising safety, compliance and reliability at their facilities.
SOCOTEC is present at all French nuclear power plants and waste storage sites, providing the following
services:
-
Calculations and digital simulations:
Assessments for nuclear safety and security files, research and development, project validation, calculation
note checks
-
Owner assistance:
Technical consultancy, Works inspection supervision and monitoring, Visual inspection of structures,
Assessment of safety features, Project management
Technical inspections – Risk analysis – Advice on regulatory files (installation classified for environmental
protection, IOTA [installations, infrastructure, works and activities], building permits, etc.)
-
Non-destructive inspections and testing:
Non-Destructive Tests, QA/QC, expediting, quantity surveying, qualification of welders and welding
operating modes, compliance inspections
Technical inspections of works – Assistance in acceptance procedures
-
Nuclear training:
Core nuclear knowledge, safety training, industrial maintenance courses, assistance, consultancy, audit,
radiation dose management (radiation protection personnel)
Expertise recognised in France and internationally
SOCOTEC is present at all French nuclear power plants and Andra-operated sites through its various
dedicated entities and teams (SOCOTEC Power Services, SOCOTEC Nuclear Training, CTE Nordtest, DEMA and
business units in the SOCOTEC France network). Internationally, the group operates in Finland, South Africa
and China, with worldwide revenue for its nuclear activities reaching nearly €40 million. For its work in this
sector, where it is a leading name in risk management and performance improvement, SOCOTEC draws on a
specialist pool of 400 skilled, responsive engineers and technicians whose know-how is shored up by constant
analysis of feedback.
SOCOTEC holds COFRAC accreditation (inspections, environmental measurements, etc.), ISO and CEFRI safety
certification, ISO 9001/2008, ISO 17020 accreditation, EDF/UTO Case 1 non-destructive inspections/testing,
MASE/UIC and CEFRI E accreditation, membership of the ASAP, Ministry of Defence authorisation to deal with
“sensitive contracts”, unreserved level 1 Alstom Qualification and more. It employs the services of over 150
specialists in non-destructive testing, all with COFREND certification (levels 1, 2 and 3).
Services performed by SOCOTEC include:
-
Technical verification of preliminary studies for the Cigeo deep geological disposal facility (Andra).
-
Calculation assignments carried out for the CEA, IRSN, AREVA and its subsidiaries and Andra, notably for
the Cigeo project.
-
Inspection/monitoring of work at the EPR sites in Flamanville and the ITER site in Cadarache.
-
Technical inspection and pressure equipment verification services to verify pre-stressed concrete
reactor models in line with pressure equipment regulations.
-
Non-destructive inspections or testing, particularly on equipment located in the reactor building
(vessels, SGR, heating rods, NDT, primary pump shafts). Presence during initial phases of new projects,
including at the EPR in Flamanville, the RJH reactor and the ITER project at Saint-Paul-lez-Durance.
-
Routine inspections, initial verifications and/or commissioning of services for lifting equipment,
electricity and lightning protection in the COREST, CIVAR, CAUX-MANCHE and ATLANTIQUE electricity
hubs: nuclear power plants at Fessenheim, Cattenom, Chooz, Bugey, Tricastin, Cruas, Golfech, Blayais
and Penly.
-
ATEX zoning and lightning protection activities (Penly nuclear power plant).
-
Nuclear training at six centres in France (Blyes, Bollène, Dieppe, Dunkirk, Lagnieu and Saint-Genis1
Pouilly) with five Radiation Protection and Risk Management practical training centres, three SCN–CSQ
2
practical training centres, and one ARC -accredited practical training centre in Dunkirk.
1
2
SCN–CSQ: Common Nuclear Knowledge – Quality/Safety Complement
ARC: Skill Adaptation/Renewal
About SOCOTEC
SOCOTEC has built its reputation over 60 years as an independent third party assisting companies in the areas of
quality, health and safety, and the environment.
Through its inspection and measurement, assistance and consultancy, and training and certification services,
SOCOTEC helps to optimise the performance of companies in every sector by managing the risks inherent in their
activities.
With consolidated revenue of €506 million, operations in 50 countries, 200,000 clients, 5,150 employees, over 170
forms of external recognition and a network of 200 establishments in France, the SOCOTEC Group is a major
player in risk management.
For further information, go to www.socotec.com
About the World Nuclear Exhibition (WNE)
The WNE is France's first biannual international civil nuclear trade fair. It was set up by the country’s
association of nuclear industry exporters, AIFEN, to provide opportunities for stakeholders in this high added
value industry to network, form partnerships, find new suppliers and develop their exports.
More information at www.world-nuclear-exhibition.com
Press contact: Agence We FEED - Press Relations
Patricia Deckmyn - Tel: 00 33 1 39 07 43 75 - [email protected]

Documents pareils

Télécharger le PDF

Télécharger le PDF réalise dans ce secteur un chiffre d’affaires de près de 40 M€ et se positionne comme un acteur majeur de la maîtrise des risques et de l’amélioration des performances.

Plus en détail

Les experts nucléaires français renforcent leur

Les experts nucléaires français renforcent leur -Domaines techniques : fabrication du combustible, instrumentation, radioprotection, contrôlecommande, régulation, appareils à pression, chaudronnerie, tuyauterie, tubes, équipements électriques, ...

Plus en détail