24 - TW-SWM Multiconducteur avec gaine
Transcription
24 - TW-SWM Multiconducteur avec gaine
TEROL TW - SWM Code M ROLLING STOCK CABLES THIN WALL EN 50306-4 CONTRÔLE & SIGNALISATION CONTROL & SIGNALLING Multiconducteurs avec gaine d'épaisseur normale Multi core cables with standard wall sheath APPLICATIONS FERROVIAIRES RAILWAY APPLICATIONS 300 / 500 (600) V AC 450 / 750 V DC CARACTERISTIQUES DU CABLE - 40°C Bon Good Résistant à huile et fuel Oil and fuel resistant Bon / Good EN 60811 CABLE CHARACTERISTICS Bon / Good Tenue au feu Zero halogène Sans plomb EN 61034 Fire behaviour Zero halogen Without lead EN 60332-1 EN 50267-2 EN50266-2-4 EN 60684-2 EN 50305 §9.1 EN 50305 §9.2 r = 10 D ---------- voir page 2 / see on page 2 ----------- DESCRIPTIF GENERAL DU CABLE GENERAL CABLE DESIGN AME / CONDUCTOR • âme en cuivre recuit étamé / tin-coated annealed copper conductor conforme à / according to EN 50306-2 The information in this document is indicative. COPYRIGHT RESTRICTED • température à l'âme 90°C en régime permanent pendant 100 000 heures ou 110°C pendant 20 000 heures en durée cumulée; en court-circuit 160°C / 5 secondes 90°C conductor temperature in continuous duty during 100 000 hours or 110°C during 20 000 hours in cumulated time; in short-circuit 160°C / 5 seconds ISOLATION / INSULATION mélange spécial sans halogène / LSZH special compound repérage numérique / numbered identification GAINE EXTERNE / OUTER SHEATH mélange spécial sans halogène / LSZH special compound (S2, EM 104) couleur NOIRE / BLACK coloured Marquage / Marking (exemple / example) PRYSMIAN 255 -TEROL TW SWM - EN 50306-4 1P 300 V 4 x 2.5 MM 90°C N° de lot / batch No. Service commercial / Sales department ( + 33 3 86 95 77 68 - + + 33 3 86 95 77 81 : [email protected] - 1 http://www.prysmian.com Catalogue - Indice E du 02/12/2009 1/4 TEROL TW - SWM Code M ROLLING STOCK CABLES THIN WALL EN 50306-4 CONTRÔLE & SIGNALISATION CONTROL & SIGNALLING Multiconducteurs avec gaine d'épaisseur normale Multi core cables with standard wall sheath 300 / 500 (600) V AC NORMES D'ENVIRONNEMENT ET D'ESSAIS 450 / 750 V DC ENVIRONMENTAL AND TEST STANDARDS Environnement TS 45545 - HL4 (équivalent à NF F 16-101 - C F0, BS 6853 - la & DIN 5510) Environment TS 45545 - HL4 (equivalent to NF F 16-101 - C F0, BS 6853 - la & DIN 5510) Tenue au feu • essai à la flamme EN 60332-1 (NF C 32-070 C2, CEI 60332-1 & DIN VDE 0482§265-2-1) • essai au feu EN 50266-2-4 (CEI 60332-3 & DIN VDE 0482§266-2-4) + EN 50305§9-1 (ex BS 4066-1 & 3, et DIN VDE 472 § 804 A-C) Fire performance • flame test EN 60332-1 (NF C 32-070 C2, IEC 60332-1 & DIN VDE 0482 §265-2-1) • fire test EN 50266-2-4 (IEC 60332-3 & DIN VDE 0482§266-2-4) + EN 50305§9-1 (ex BS 4066-1 & 3, et DIN VDE 472 § 804 A-C) Absence d'halogène • EN 50267-2-1 (CEI 60754-1) • EN 60684-2 Halogen free performance • EN 50267-2-1 (IEC 60754-1) • EN 60684-2 Corrosivité / Toxicité • toxicité EN 50305 §9.2 • acidité et toxicité des gaz EN 50267-2-2 (CEI 60754-2) & NF X 70-100 Corrosivity / Toxicity • toxicity EN 50305 §9.2 • acid and toxic gases EN 50267-2-2 (IEC 60754-2) & NF X 70-100 Dégagement de fumées faible dégagement de fumée EN 61034 (CEI 61034 & DIN VDE 0482§268-2) (ex BS 7622-1 & 2, et DIN VDE 472 § 816) Smoke emission low smoke EN 61034 (IEC 61034 & DIN VDE 0482§268-2) (ex BS 7622-1 & 2, and DIN VDE 472 § 816) CERTIFICATS D'HOMOLOGATION HOMOLOGATION CERTIFICATES ALSTOM SNCF RATP Service commercial / Sales department ( + 33 3 86 95 77 68 - + + 33 3 86 95 77 81 : [email protected] - 1 http://www.prysmian.com Catalogue - Indice E du 02/12/2009 2/4 The information in this document is indicative. COPYRIGHT RESTRICTED APPLICATIONS FERROVIAIRES RAILWAY APPLICATIONS TEROL TW - SWM Code M ROLLING STOCK CABLES THIN WALL EN 50306-4 APPLICATIONS FERROVIAIRES RAILWAY APPLICATIONS CONTRÔLE & SIGNALISATION CONTROL & SIGNALLING Multiconducteurs avec gaine d'épaisseur normale Multi core cables with standard wall sheath 300 / 500 (600) V AC 450 / 750 V DC CARACTERISTIQUES DIMENSIONNELLES Code produit Nombre de Code product conducteurs DIMENSIONAL CHARACTERISTICS Gaine / Sheath épaisseur Ø extérieur nominale sans avec et section mini en conducteur conducteur nominale un point vert/jaune vert/jaune Number of Minimum Outer without with cores and thickness at nominal Ø green/yellow green/yellow nominal one point conductor conductor cross section (1) mm² mm (1) mm kg/km 0.5 mm² 4 x 0.5 7 x 0.5 13 x 0.5 19 x 0.5 37 x 0.5 0,42 0,42 0,56 0,56 0,56 4,6 ± 0,5 5,4 ± 0,5 7,8 ± 0,5 8,6 ± 0,5 11,4 ± 0,6 PTMMP506 PTMMP507 PTMMP508 PTMMP509 PTMMP510 PTMMP511 4 x 0.75 7 x 0.75 13 x 0.75 19 x 0.75 37 x 0.75 48 x 0.75 0,42 0,42 0,56 0,56 0,56 0,56 5,1 ± 0,5 6,0 ± 0,5 8,7 ± 0,5 9,6 ± 0,6 12,8 ± 0,6 14,6 ± 0,7 32 51 98 135 246 The information in this document is indicative. COPYRIGHT RESTRICTED PTMMP501 PTMMP502 PTMMP503 PTMMP504 PTMMP505 0.75 mm² PTMMP006 PTMMP007 PTMMP008 PTMMP009 PTMMP010 PTMMP011 Mass (approx) 0.5 mm² PTMMP001 PTMMP002 PTMMP003 PTMMP004 PTMMP005 Masse 0.75 mm² 42 68 130 184 338 440 (1) Toutes les épaisseurs sont conformes aux normes EN (1) All thicknesses are according to EN standards Service commercial / Sales department ( + 33 3 86 95 77 68 - + + 33 3 86 95 77 81 : [email protected] - 1 http://www.prysmian.com Catalogue - Indice E du 02/12/2009 3/4 TEROL TW - SWM Code M ROLLING STOCK CABLES THIN WALL EN 50306-4 APPLICATIONS FERROVIAIRES RAILWAY APPLICATIONS CONTRÔLE & SIGNALISATION CONTROL & SIGNALLING Multiconducteurs avec gaine d'épaisseur normale Multi core cables with standard wall sheath 300 / 500 (600) V AC 450 / 750 V DC CARACTERISTIQUES DIMENSIONNELLES Code produit Nombre de Code product conducteurs DIMENSIONAL CHARACTERISTICS Gaine / Sheath épaisseur Ø extérieur nominale sans avec et section mini en conducteur conducteur nominale un point vert/jaune vert/jaune without with green/yellow conductor (1) Number of Minimum Outer cores and thickness at nominal Ø green/yellow nominal one point conductor cross section (1) mm² mm mm kg/km 1 mm² 4x1 7x1 13 x 1 19 x 1 37 x 1 0,42 0,42 0,56 0,56 0,56 5,4 ± 0,5 6,5 ± 0,5 9,2 ± 0,5 10,4 ± 0,6 13,9 ± 0,6 PTMMP517 PTMMP518 PTMMP519 PTMMP520 PTMMP521 4 x 1.5 7 x 1.5 13 x 1.5 19 x 1.5 37 x 1.5 0,42 0,56 0,56 0,56 0,56 6,5 ± 0,5 8,2 ± 0,5 11,3 ± 0,6 12,6 ± 0,6 16,9 ± 0,7 PTMMP022 PTMMP522 PTMMP023 PTMMP523 PTMMP024 PTMMP524 2 x 2.5 3 x 2.5 4 x 2.5 0,56 0,56 0,56 7,2 ± 0,5 7,9 ± 0,2 8,4 ± 0,5 1.5 mm² 53 88 163 229 430 The information in this document is indicative. COPYRIGHT RESTRICTED PTMMP512 PTMMP513 PTMMP514 PTMMP515 PTMMP516 PTMMP017 PTMMP018 PTMMP019 PTMMP020 PTMMP021 Mass (approx) 1 mm² PTMMP012 PTMMP013 PTMMP014 PTMMP015 PTMMP016 Masse 1.5 mm² 2.5 mm² 79 136 248 347 651 2.5 mm² 74 111 139 (1) Toutes les épaisseurs sont conformes aux normes EN (1) All thicknesses are according to EN standards Service commercial / Sales department ( + 33 3 86 95 77 68 - + + 33 3 86 95 77 81 : [email protected] - 1 http://www.prysmian.com Catalogue - Indice E du 02/12/2009 4/4