The PRODAP INRACK is a digital audio player card to be

The PRODAP INRACK is a digital
CD quality stereo digital sound
audio player card to be inserted in a
rack frame. The total absence of me-
Highly reliable. Storage on EPROM. No moving parts
chanical parts in its design (storing
RS232 or discrete control
on
Eprom)
guarantees
absolute
reliability.
Besides
No running costs
functionning
as
audio
Seamless loop
players, they integrate various automated functions allowing you to
control the
environment
Multi-language capability
(lighting,
Two years warranty
electric doors, etc…) in synchronization with the sound.
They are built to replace CD players
wherever reliability is a decisive
factor, and specially for autonomous
audiovisual shows.
Commercial Division
Manufacturer
RSF EUROPE S.A.
18, rue de l'industrie (Z.I. de Windhof)
L- 8399 Koerich (G.D. Luxembourg)
Tél : +352/49 74 20 Fax : +352/29 63 70
E-MAIL: [email protected]
RSF
45,Avenue Marcel Dassault
(Parc de la Plaine)
31500 Toulouse - France
Tél : +33-5/61207909 Fax : +33-5/61800094
Technical Specifications
Audio parameters
Audio format .........................................16 bits CD quality audio compression using Musicam MPEG 1/2 Layer II
Bandwidth ............................................ 20Hz to 20KHz
Distorsion ............................................. Below 0,01%
Dynamic ................................................ 92 db
General parameters
Recording time capacity ....................... 1H30 maximum (using ExA extension board)
Number of messages ............................ 32 (maximum)
Storage support .................................... EPROM (1 to 21 dependant of the capacity needed)
Connectors
Output (line level - low imp.10 Ohms) ...Jack Fem.6,3mm (2X)
Headset output...................................... Jack Fem.3,5mm
Control and bus .....................................SUB-D15 Fem. - 5 dry contact input ports
- 4 outputs (analog 5V/10mA)
- bidirectional RS232
- audio bus
Power IN ...............................................BT
Buttons
Start/Stop ..............................................1
Volume G/D (-10 to +15 dB)..................Potentiometer (2)
Indicators
Playing ..................................................1 red led
Programming ...................................................via software "ProDAPROM" RSF on MAC OS
Fonctionnalities...............................................The messages can be triggered via
- 5 input ports (dry contact or analog)
- RS232 (up to 32 messages)
- button on front face
Control : each output port (5 analog ports or 32 in RS232) can generate a triggering
signal synchronized on the audio message with a precision of 0,001 sec.
Adjustable temporizing by software for the start of each sequence
Audio bus input for mixing (e.g. for a multi-language use)
Power supply...................................................12V/5V - AC (internal in a CH3UA)
Maximal consumption ....................................0,75 W
Enclosure.........................................................Metal Rack frame(CH3UA)
Dimensions......................................................158 x 250 x 45 mm (L x D x H)
Weight .............................................................220 gr.
Environnement
Temperature .........................................0°C(32°F) to 50°C(122°F)
Relative Humidity ..................................0-90%
Warranty .........................................................2 years
Optionnal accessoires
Réf. CH3UA .................19" 3U Rack for 12 ProDAP card with integrated power supply
Réf. MemoIR ................IR control Interface to control any infra-red device in synchronization with an audio message
Réf. MemoDMX............DMX control Interface for the synchronization of a lighting show with a message
Réf. CAreRS ................16 relay output card (for the synchronization of motors, animatronics, doors,…)
Réf. MultiAMP ..............Power amplifier 4x20W
Réf. CamIRS ................15 input/1 stop message triggering interface
Réf. RadarIR ................Infra-red radar kit for message triggering
Réf. ExA .......................Memory extension board 7 Eproms
Réf. ExB .......................Memory extension board 14 Eproms