Geller SX-690 Manufacturing Manual

Model SX-690
OPERATING MANUAL
NOTICE
The information and specifications in this manual are subject to change without notice.
While every precaution has been taken to make this manual accurate, the Manufacturer shall not be
liable for any errors or omissions, nor for any damages resulting from the use of the information
herein.
This manual may not be copied or transmitted by any means, in whole or in part, without prior
written consent from the Manufacturer.
All rights reserved.
FEDERAL COMMUNICATIONS COMMISION NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to section J in Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause destructive interference of radio
communications. Operation of this equipment in a residential area is likely to cause interference, in
which case the user will be required to correct the problem at his own expense.
Introduction
We very much appreciate your purchase of this cash register.
The cash register is equipped with
function keys which allow you to program and use various functions and with numeric keys for
entering numbers.
This Manual explains the methods for programming and entering transactions with this cash register
and it describes precautions and accessory items necessary to use it.
This manual also shows
examples of the receipts that will be printed out for each case described.
Before using the cash register, please read this manual so that you understand its operation.
CONTENTS
1. GENERAL SPECIFICATIONS ...............................................................................................................1
2. PART NAME AND FUNCTIONS ............................................................................................................2
1). EXTERNAL VIEW ..............................................................................................................................2
2). CONTROL LOCK...............................................................................................................................3
3). DISPLAY ............................................................................................................................................4
4). PRINTER ...........................................................................................................................................5
5). KEYBOARD .......................................................................................................................................6
3䯺SETTING UP ..........................................................................................................................................9
1). INITIALIZATION.................................................................................................................................9
(1) SYSTEM CLEAR ...........................................................................................................................9
(2) HALF CLEAR...............................................................................................................................10
2). INSTALLING THE PAPER ROLL..................................................................................................... 11
4. QUICK START......................................................................................................................................13
5. REGISTRATION ...................................................................................................................................14
1). EXAMPLE OF REGISTRATION AND RECEIPT .............................................................................14
1-1. SINGLE ITEM PRICE PRESET.................................................................................................14
1-2. DEPARTMENT OF HIGH AMOUNT LOCK-OUT.......................................................................14
1-3. MULTIPLE SALE AND CHANGE...............................................................................................15
1-4. CHANGE COMPUTATION AFTER TRANSACTION .................................................................15
1-5. MULTIPLICATION, SPLIT PRICING AND REPEAT COMPUTATION ..................................................16
1-6. COVERS KEY............................................................................................................................16
1-7. PLU KEY ....................................................................................................................................17
1-8. PRICE ENTRY OF PLU .............................................................................................................17
1-9. PLU ENTRY KEY.......................................................................................................................18
1-10. SALES REGISTRATION OF UN-PROGRAMMED PLU(DEPARTMENT) ...........................................18
1-11. DISCOUNT...............................................................................................................................19
1-12. DISCOUNT RATE ....................................................................................................................20
1-13. PLUS PERCENTAGE RATE....................................................................................................21
1-14. SALE ON CHARGE WITH #/NS KEY AND ERROR CORRECTION WITH EC KEY...................................21
1-15. TENDERING WITH X1000 KEY..............................................................................................22
1-16. TENDERING WITH X10000 KEY............................................................................................22
1-17. TRANSACTION WITH CHKS䎃 KEY ........................................................................................23
1-18.
CARD1 CARD2 CARD3 CARD4
KEYS ............................................................................23
1-19. REGISTRATION WITH SFT1 SFT2 SFT3 SFT4 KEYS.........................................................24
1-20. RETURN SALE ........................................................................................................................24
1-21. BOTTLE RETURNING.............................................................................................................24
1-22. VOID ........................................................................................................................................25
1-23. RECEIVED-ON-ACCOUNT AND PAID OUT...........................................................................26
1-24. REGISTRATION WITH NTX TX1 TX2••AND TX3
KEYS ....................................................27
1-25. REGISTRATION WITH TXEX .................................................................................................27
1-26. VARIOUS CASES OF ISSUING RECEIPT .............................................................................28
2). PREVIOUS BALANCE (IN CASE OF HOUSE CHARGE MODE) ....................................................................29
3). BAR-RESTAURANT MODE AND CLK ID , CKPD••KEYS .............................................................31
4). TRANSACTION HOLD KEY............................................................................................................32
5). GUEST CHECK PRINT AT ECR PRINTER ..........................................................................................33
6). FOOD STAMP .................................................................................................................................35
6. VARIOUS FUNCTIONS........................................................................................................................37
1). INVENTORY CONTROL BY 2 MASTERS ......................................................................................37
2). INDIVIDUAL GUEST PAYMENT......................................................................................................38
3). TABLE TRANSFER..........................................................................................................................42
4). ITEM TRANSFER ............................................................................................................................43
5). GUEST ACCOUNT ..........................................................................................................................44
6). INVOICE FUNCTION.......................................................................................................................48
7. X/Z REPORT ........................................................................................................................................49
1). CHECK AND RESET THE SALES INFORMATION ........................................................................49
2). EXPLANATION OF FUNCTION KEYS............................................................................................52
3). HOW TO CHOOSE REPORT..........................................................................................................53
4). SELECTION IN REPORT MENU ....................................................................................................55
5). SELECT SALES REPORT BY MACRO KEY ..................................................................................59
6). OPERATION PROCEDURE FOR REPORTS WITH RANGE SPECIFICATION ............................59
7). HOW TO EXECUTE CASH DECLARATION...................................................................................61
8). ISSUE RE ORDER LIST MANUALLY .............................................................................................63
9). CONSOLIDATION ...........................................................................................................................64
10). SAMPLE REPORT ........................................................................................................................66
8. SD CARD..............................................................................................................................................71
1).HOW TO INSERT AND REMOVE AN SD CARD .............................................................................71
2). SAVING PROGRAM DATA TO SD CARD.......................................................................................72
3). READ PROGRAM DATA FROM SD CARD (LOADING).................................................................73
9. INTERFACE PORTS ............................................................................................................................74
10.TROUBLESHOOTING ........................................................................................................................77
11. MAINTENANCE..................................................................................................................................78