Contribution au contrôle de la compliance d`un bras de robot à
Transcription
Contribution au contrôle de la compliance d`un bras de robot à
Références bibliographiques Références bibliographiques [ASA90] Asada, H. and Kakumoto, Y. The dynamic analysis and design of a high-speed insertion hand using the generalized centroid and virtual mass. Transaction of ASME, Journal of Dynamic Systems, Measurement and Control, 1990,Vol. 112, pp. 647-652. [ASA86] Asada, H. and Slotine, J.-J. E. Robot Analysis and Control. New York : Wiley,1986, Chapitre 7 : Compliant Motion Control, pp. 185-217. [BAD93] Badano, F. Contribution au développement d'une méthodologie d'assemblage automatisé par approche stochastique et compliance. Application à l'insertion de pièces cylindriques sans chanfrein. Thèse de doctorat : Institut National des Sciences Appliquées, Lyon, 1993, 153 p. [BAD94] Badano, F., Bétemps, M. and Thomasset, D. Control of a planar fine positioner actuated by metal bellows. Automatica, 1994,Vol. 30, n°11, pp. 1677-1691. [BAU96] Baungaard, J. R. Modelling and Control of flexible Robot Links. Thèse de doctorat : Technical University of Denmark, Lyngby , Denmark, 1996, 342p. [BEN95] Ben-Dov, D. and Salcudean, S. E. A force-controlled pneumatic actuator. IEEE Transactions on Robotics and Automation, 1995,Vol. 11 n°6, pp. 906-911. [BEN96] Benea, R. Contribution à l'étude des robots pleinement parallèles de type 6R-RR-S. Thèse de doctorat : Université de Savoie, Annecy, 1996, 177 p. [BER95] Berthe-Pujas A. Etude de la robustesse de schémas de commande position/force pour robots à deux bras. Thèse de doctorat : Université Montpellier II, Montpellier, 1995, 158 p. [BER89] Berthomieu, T. Etude d'un micro-manipulateur parallèle et de son couplage avec un robot porteur. Thèse de docteur-ingénieur : Ecole Nationale Supérieure de l'Aéronautique et de l'Espace, Toulouse, 1989, 185 p. [BET94] Bétemps, M. Use of Mechatronic Concept for the realisation of a feedback Control Actuator with Metal Bellows. Some Applications. Invited Paper, Second Japanese-French Congress of Mechatronics, Takamatsu, Japan, 1994, pp. 701-706. [BET90] Bétemps, M., Jutard, A. and Ye, N. Actionneur asservi par fluide sous pression, pour petits mouvements, France, brevet n° 90-03359. 1990. [BRI95] Bridges, M. M. and Dawson, D. M. Redesign of robust controllers for rigid-link flexiblejoint manipulators actuated with harmonic drive gearing. IEE Proc.-Control Theory Appl., 1995,Vol. 142, n°5, pp. 508-514. [BRU81] Brussel, H. V., Thielemans, H. and Simons, J. Further developments of the active adaptive compliant wrist (AACW) for robot assembly, proceedings of the 11th International Symposium on industrial Robot, Tokyo, Japan, 1981, pp. 377-384. 118 Références bibliographiques [CAL80] Callion, H. M., Alexander, K. and Pham, D. Aids for Automatic Assembly, First International Conference on Assembly Automation, Brighton, Great Britain, 1980, pp. 313323. [CHI93] Chiaverini, S. and Sciavicco, L. The parallel Approach to Force/Position Control of Robotic manipulators. IEEE transactions on Robotics and Automation, 1993,Vol. 9, n°4, pp. 361-373. [CLA85] Clavel, R. Dispositif pour le déplacement et le positionnement d'un élément dans l'espace, Suisse, brevet n°672089 A5. 1985. [CLA91] Clavel, R. Conception d'un robot parallèle rapide à 4 degrés de liberté. Thèse de doctorat : Ecole Polytechnique Fédérale de Lausanne, Lausanne, Suisse, 1991, 133 p. [CLA94] Clavel, R. Robots parallèles. Les techniques de l'ingénieur, 1994,R 7710, pp. 1-8. [COU97] Couturier, P. Commande par réseaux de neurone : Application au contrôle d'un préhenseur électropneumatique. Thèse de doctorat : Institut National des Sciences Appliquées, Lyon, 1997, 165 p. [COU96] Couturier, P., Johannet, A. and Bétemps, M. Neural control of an electropneumatic actuator for a gripper device, Proceedings of the 3rd France-Japan congress and 1st EuropeAsia congress on Mechatronics, Besançon, France, 1996, pp. 481-486. [CUT84] Cutkosky, M. and Wright, P. Active control of a compliant wrist in manufacturing tasks, Proceedings of the 14th International Symposium on Industrial Robots, Gothenburg, Suède, 1984, pp. 517-528. [CUT89] Cutkosky, M. R. and Kao, I. Computing and Controlling the compliance of a Robotic Hand. IEEE Transactions on Robotics and Automation, 1989,Vol. 5 n°2, pp. 151-165. [DAU91] Dauchez, P. and Delebarre, X. Force-controlled assembly of two objects with a two arm robot. Robotica, 1991,Vol. 9, n°3, pp. 299-306. [DOM88] Dombre, E. and Khalil, W. Modélisation et commande des robots. Paris : Hermes,1988, Commande en effort, pp. 339-348. [DOU90] Douady, D. and Artigue, F. Réalisation d'un robot parallèle à trois liaisons et six degrés de liberté : le robot Space. Revue d'Automatique et de Productique Appliquée, 1990,Vol.3, n°3-4, pp. 25-36. [FAK85] Fakri, A. Modélisation et Simulation de la structure compliante DCR pour robot d'assemblage Thèse de doctorat : Institut National des Sciences Appliquées, Lyon, France, 1985, 183 p. [GOL92] Goldenberg, A. A. Analysis of Force control based on linear models, International Conference on Robotics and Automation, Nice, France, 1992, pp. 1348-1353. 119 Références bibliographiques [GOS94] Gosselin, C. and Hamel, J. F. The agile Eye : A high performance three-degree-of freedom camera-orienting device, IEEE International Conference on Robotics and Automation, San Diego, California, 1994, pp. 781-787. [GOU95] Goudali, A., Lallemand, J. P. and Zeghloul, S. Espace de travail de la nouvelle structure 2-Delta. Revue d'Automatique et Productique Appliquée, 1995,Vol. 8, n°2-3, pp. 205-210. [HAY92] Hayakawa, Y., Hanafusa, H. and Kawamura, S. Dynamic Insertion by Pneumatic Gripper using Bellows Actuator, 1st Japanese-french congress of Mechatronics, Besançon, France, 1992, pp. 1-6. [HAY93] Hayakawa, Y. and Kawamura, S. Sensing Actuator Using a Pneumatic Bellows System and Its Application to a Soft Gripper, IEEE International Conference on Robotics and Automation, Atlanta, 1993, pp. 398-403. [HAY95] Hayakawa, Y. and Kawamura, S. Pneumatic bellows actuator with force sensing ability and its application to a pneumatic robot. Journal of Robotics and Mechatronics, 1995,Vol. 7 n°6, pp. 474-482. [HER92] Hervé, J. M. and Sparacino, F. Star, a new concept in robotics, ARK, Ferrare, 1992, pp. 176-183. [HOG85] Hogan, N. Impedance control : An approach to manipulation. ASME Journal of Dynamic Systems, Measurement and Control, 1985,Vol. 107, pp. 1-24. [HOL91] Hollis, R. L., Salcudean, S. E. and Allan, A. P. A six-degree-of-freedom magnetically levitated variable compliance fine-motion wrist : Design, modelling and control. IEEE Transaction on Robotics and Automation, 1991,Vol. 7 n°3, pp. 320-332. [HON95] Hongler, M. O., Badano, F., Bétemps, M. and Jutard, A. A random Exploration Approach for Automatic Chamferless Insertion. The International Journal of Robotic Research, 1995,Vol.14, n°2, pp. 161-173. [HYD80] Hydra. Metal Bellows Handbook, n°441F. Witzenmann GMBH : Pforzheim, Germany , 1980. 221 p. [JUT89] Jutard, A., Redarce, T., Fakri, A. and Bétemps, M. Geometric model of the DCR-LAI compliant device. Robotica, 1989,Vol.7, pp. 151-157. [KAW94] Kawamura, S. and Hayakawa, Y. A new type of pneumatic robot using bellows actuators with force sensing ability, IEEE International Conference on Robotics and Automation, San Diego, California, 1994, pp. 2451-2456. [KAW95] Kawamura, S., Hayakawa, Y., Goto, T. and Oyama, H. Design of a powerful robot using pneumatic bellows actuators, 7th International Conference on advanced Robotics, Sant Feliu de Guixols, Catalonia, Spain, 1995, pp. 569-574. 120 Références bibliographiques [KAZ86] Kazerooni, H., Sheridan, T. B. and Houpt, P. K. Robust Compliant Motion for Manipulators, Part I : The Fundamental Concepts of Compliant Motion. IEEE Journal of Robotics and Automation, 1986,Vol. RA-2, n°2, pp. 83-92. [KIM92] Kim, W. S., Hannaford, B. and Bejczy, A. K. Force reflection and shared compliant control in operating telemanipulators with time delay. IEEE Transactions on Robotics and Automation, 1992,Vol. 8, n°2, pp. 176-185. [MAE94] Maekawa, A., Oomichi, T. and Oonishi, K. Compliance Control of an Articulated Manipulator. JSME International Journal, 1994,Vol. 37, n°1, pp. 155-161. [MAT94] Matsuno, F., Asano, T. and Yoshiyuki, S. Modeling and quasi-static Hybrid position/force control of constrained planar two-link flexible manipulator. IEEE Transactions on Robotics and Automation, 1994,Vol. 10, n°3, pp. 287-297. [MER86] Merlet, J.-P. Contribution à la formalisation de la commande par retour d'effort en robotique. Application à la commande de robots parallèles. Thèse de doctorat : Université Paris 6, Paris, 1986, 135 p. [MER97] Merlet, J. P. Les robots parallèles. Hermès : Paris , 1997. 367 p. [MIL93] Millier, A., Vallet, G., Bétemps, M., Ye, N. and Simon, J. P. Poster, PITTCON'93, 44th Pittsburg Conference & Exposition on Analytical Chemistry and Applied Spectroscopy, Atlanta, USA, 1993. [NAS58] Naslin, P. Technologie et calcul pratique des sytèmes asservis (régulateurs et servomécanismes). Dunod : Paris , 1958. 447 p. [NEV80] Nevins, J. and Whitney, D. Assembly research. The Industrial Robot, 1980,Vol. 7, n°1, pp. 27-43. [NGU95] Nguyen-Trong, D. Modélisation et simulation de la compliance passive. Application à l'assemblage automatique à grande vitesse. Thèse de doctorat : Institut National Polytechnique, Grenoble, 1995, 130 p. [NOM93] Nombrail, N. Analyse et commande d'une famille de robots manipulateurs à structure parallèle et redondante Thèse de doctorat : Ecole Nationale Supérieure de l'Aéronautique et de l'Espace.1993, 209 p. [OMB96] Ombede, G. Analyse de la compliance par répartition de puissance Robot-Environnement Thèse de doctorat : Institut National des Sciences Appliquées, Lyon, 1996, 180 p. [OUS91] Oustaloup, A. La commande CRONE. Hermès : Paris , 1991. 445 p. [PER97] Pernette, E., Henein, S., Magnani, I. and Clavel, R. Design of parallel robots in microrobotics. Robotica, 1997,Vol. 15, pp. 417-420. [PES90] Peshkin, M. A. Programmed Compliance for Error Corrective Assembly. IEEE Transaction on Robotics and Automation, 1990,Vol. 6, n°4, pp. 473-482. 121 Références bibliographiques [PFR94] Pfreundschuh, G. H., Sugar, T. G. and Kumar, V. Design and Control of a three-degreesof-freedom, in parallel, actuated manipulator. Journal of Robotic Systems, 1994,Vol. 11 n°2, pp. 103-115. [PHA93] Pham, C. M., Khalil, W. and Chevallereau, C. A non linear model-based control of flexible robots. Robotica, 1993,Vol.11, n°1, pp. 73-82. [PIE92] Pierrot, F., Dauchez, P., Uchiyama, M., Limura, K., unno, K., and Toyama, O. Hexa : a fully parallel 6 d.o. f. Japanese-French robot, 1st Congress on mechatronics, Besançon, France, 1992, pp. 1-8. [PIE90] Pierrot, F., Reynaud, C. and Fournier, A. DELTA : a simple and efficient parallel robot. Robotica, 1990,Vol. 8, pp. 105-109. [PRE96b] Prelle, C. and Bétemps, M. Compliance control of a pneumatic actuator using state feedback law. Application to a Delta robot, Proceedings of the 3rd France-Japan and 1st Europe-Asia congress on Mechatronics, Besançon, France, 1996, pp. 471-474. [PRE96a] Prelle, C., Bétemps, M., Bojko, T. and Uhl, T. Pneumatic actuator design - Mechatronic Approach, Proceedings of the 3rd France-Japan and 1st Europe-Asia congress on Mechatronics, Besançon, France, 1996, pp. 24-28. [PRE95a] Prelle, C., Bétemps, M. and Jutard, A. Actionneur compliant pour la robotique, Journées Tunisiennes d'Electrotechnique et d'Automatique, Nabeul, Tunisie, 1995, pp. 198-202. [PRE97] Prelle, C., Bétemps, M. and Jutard, A. Strategies to control the compliance from electropneumatic actuator, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, Hangzhou, Chine, 1997, pp. 293-298. [PRE95b] Prelle, C., Bétemps, M. and Scavarda, S. Design And Performance, Eighth Bath International Fluid Power Workshop. Bath, England : Wiley,1995, An electropneumatic actuator for a compliant robot, pp. 300-313. [PRE96c] Prelle, C., Jutard, A. and Bétemps, M. Compliance adjustment of a metal bellows actuator by control law parameters. soumis à Control Engineering Practice, 1996. [PRI97] Prior, S. D. and White, A. S. Simulation and control of a pneumatic muscle actuator for rehabilitation robot, Conference on Control of Industrial systems, Belfort, France, 1997, pp. 420-424. [RAI81] Raibert, M. H. and Craig, J. J. Hybrid Position/Force Control of Manipulators. Transactions of the ASME, Journal of Dynamic Systems, Measurement and Control, 1981,Vol.102, pp. 126-133. [RAV96] Ravn, O., Szymkat, M., Uhl, T., Bétemps, M., Pjetursson, A., and Rod, J. Mechatronics Blockset for Simulink. Concept and Implementation, IEEE International Symposium on Computer Aided Control System Design, Dearborn, USA, 1996, pp. 1-16. 122 Références bibliographiques [ROB84a] Robert, N., Pillet, M., Liegeois, G. and Jutard, A. Un robot adaptatif pour l'ébavurage de pièces plastiques. Le nouvel automatisme, 1984,n°45, pp. 74-78. [ROB84b] Robert, N., Pillet, M., Liégeois, G. and Jutard, A. Adaptive burring tool for a robot finishing plastic pieces, 7th British Robot Association, Annual Conference, Cambridge, Great Britain, 1984, pp. 203-213. [ROD95] Rodic, A. D. and Vokobratovic, M. K. Contribution to the controller design in tasks of robot deburring. Mechanical Machines Theory, 1995,Vol. 30, n°3, pp. 363-382. [ROU83] Rouget, J. P. Contribution à l'étude structurelle et fonctionnelle d'organes compliants passifs pour robots d'assemblage. Thèse de docteur-ingénieur : Ecole Nationale Supérieure de Mécanique et des Microtechniques, Besançon, 1983, 203 p. [RTI91] RTI. 800/815 User's Manual. Analog Devices , 1991. non paginé. [SAL94] Salcudean, S. E., Bachmann, S. and Ben-Dov, D. A six degrees-of-freedom wrist with pneumatic suspension, IEEE International Conference on Robotics and Automation, San Diego, California, 1994, pp. 2444-2450. [SAL80] Salisbury, J. K. Active stiffness control of a manipulator in cartesian coordinates, IEEE Conference on decision & control, Albuquerque (New Mexico), 1980, pp. 95-100. [SCA89] Scavarda, S. Les asservissements électropneumatiques de position. Hermès : Paris , 1989. 62 p. [SCH88] Schutter, J. D. and Brussel, H. V. Compliant Robot Motion. I) A formalism for specifying compliant motion tasks. The international Journal of Robotics Research, 1988,Vol. 7, n°4, pp. 3-17. [SIC96] Siciliano, B. and Villani, L. Adaptive compliant control of robot manipulators. Control Engineering Practice, 1996,Vol. 4 n°5, pp. 705-712. [TAD94] Tadokoro, S. A 6 d.o.f parallel robot wrist joint by a pneumatic actuator drive. Advanced Robotics, 1994,Vol. 8, n°6, pp. 603. [TON94] Tondu, B. and Lopez, P. Theory of McKibben Muscle : A pneumatic artificial muscle contracting like skeletal muscle, 2nd Japan-France congress on Mechatronics, Takamatsu, Japan, 1994, pp. 288-291. [VIA96] Vial, D. and Tondu, B. Fuzzy Control of Robot-Arms actuated by McKibben Muscles, 3rd France-Japan congress on Mechatronics, Besançon, France, 1996, pp. 465-470. [VOL95] Volpe, R. and Khosla, P. The equivalence of second-order impedance control and proportional gain explicit force control. The International Journal of Robotics Research, 1995,Vol. 14 n°6, pp. 574-589. [WAT78] Watson, P. Remote Center Compliance, Etats Unis, brevet n° 4,098,001. 1978. [WHI87] Whitney, D. E. Historical Perspective and state of the art in Robot force control. The International Journal of robotics research, 1987,Vol. 6, n°1, pp. 3-13. 123 Références bibliographiques [YE91] Ye, N., Bétemps, M., Jutard, A. and Scavarda, S. Modelling and Control of a pneumatic adaptative gripper, IMACS-IFAC, Symposium MCTS91, Modelling and Control of technological systems, Lille, France, 1991, pp. 495-501. [YE92] Ye, N., Scavarda, S., Bétemps, M. and Jutard, A. Models of a pneumatic PWM solenoid valve for Engineering Applications. Transactions of the ASME, Journal of Dynamic Systems, Measurement and Control, 1992,Vol. 114, pp. 680-688. [ZAN85] Zang, H. and Paul, R. P. Hybrid control of robot manipulators, IEEE International Conference on Robotics and Automation, St Louis (Missouri), 1985, pp. 602-607. 124