Liste des publis
Transcription
Liste des publis
CATHERINE ELSEN FRNS Research Fellow Architect and Building Engineer Design Ergonomist Theses Elsen, C. (2011). From sketch to computed model: transformations of graphical representations to numerical models for design. PhD thesis in Engineering Sciences, University of Liège, Belgium. Advisory board: Leclercq, P. (Advisor), Darses, F. (Co-advisor), Blavier A., Teller J. List of Publications Elsen, C. (2009). Extension et modulation des usages des outils médiateurs en design industriel. Impact sur les processus de conception. Master thesis in Working and Social Sciences, Research in Ergonomics. France: Conservatoire National des Arts et Métiers; Universités Paris 5; Paris 8 et Bordeaux 2. 219p. Jury: Darses, F. (Advisor), Daniellou, F., Falzon, P., Mollard, R., Rabardel, P., & Folcher, V. Adress rue de Banneux, N° 25 4140 Sprimont Belgium Elsen, C. (2007). Analysis of product designers' creative and cognitive processes. Recommendations for the development of EsQUIsE to support Product Design. Master thesis in architecture and building engineering, Université de Liège. 131p. Jury: Leclercq, P. (Advisor), Decortis, F., Martin, G., & Cornesse, J.-C. Nationality / Status Belgian / Unmarried Peer-reviewed Journal publications Elsen, C., Dawans, A., & Leclercq, P. (in press). An anthropo-based study of industrial design cooperative practices using "mediating objects". LNCS - Lecture Notes in Computer Sciences. Date of birth October 22th, 1984 Email Mob Tel URL [email protected] 0032.(0)4 72.48.13.13 0032.(0)4 366.94.16 (pro) www.catherine-elsen.be Elsen, C., & Leclercq, P. (2008). "SketSha" or the sketch power to support collaborative design. Lecture Notes in Computer Science, Vol 5220/2008, pp. 20-27, Springer. Peer-reviewed international conference proceedings Elsen, C., Darses, F., & Leclercq, P. (in press). An Anthropo-based Standpoint on Mediating Objects: Evolution and Extension on Industrial Design Practices. In J., Gero, Design Computing and Cognition 2010. Berlin, Germany: Springer Berlin / Heidelberg. Elsen, C., Darses, F., & Leclercq, P. (in press). Evolution des pratiques en conception: une approche ergonomique compréhensive des objets médiateurs. In ESTIA (Ed.), Actes d'Ergo'IA 2010. Elsen, C., & Leclercq, P. (2010, May). Mediating objects in new industrial cooperative practices: an empirical in situ study. Paper presented at 9th International Conference in the Design of Cooperative Systems, Workshop "The mediation role of shared representations in cooperative activities: new challenges", Aix-en-Provence, France. Elsen, C., & Dawans, A. (2010). Pratiques nouvelles en conception industrielle: adaptation des acteurs, des objets médiateurs et des modalités de travail. Paper presented at 45ème congrès de la Société d'ergonomie de langue française : fiabilité, Adaptation et résilience, Liège, Belgique. Darses, F., Mayeur, A., Elsen, C., & Leclercq, P. (2008). Is there anything to expect from 3D views in sketching support tools ? In J. S., Gero & A. K., Goel (Eds.), Design Computing and Cognition '08 : Proceedings of the Third International Conference on Design Computing and Cognition (pp. 283-302). Netherlands: Springer. Elsen, C., Juchmes, R., Kubicki, S., & Leclercq, P. (2008). DCDS - Distant Collaborative Design Studio. An Initial Experimentation in Distant Collaborative Design Studio in Architecture. In M., Muylle (Ed.), Architecture "in computero", Integrating Methods and Techniques. Proceedings of the 26th eCAADe Conference on Education and Research in Computer Aided Architectural Design in Europe (pp. 9). Anvers, Belgique. Elsen, C., & Leclercq, P. (2008). The sketch power to support product design. In D., Marjanovic, M., Storga, N., Pavkovic, & N., Bojcetic (Eds.), Proceedings of the Design 2008 : 10th International Design Conference, Vol 2 (pp. 1207-1217). Zagreb, Croatia: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb. Kubicki, S., Bignon, J.-C., Elsen, C., Lotz, J., Halin, G., & Leclercq, P. (2008). Digital Cooperative Studio 07-08. In K. S., Pawar, R., Gonçalves, & K.-D., Thoben (Eds.), Proceedings of the 14th International Conference on Concurrent Enterprising : ICE 2008, A New Wave of Innovation in Collaborative Networks. Nottingham, UK: Centre for Concurrent Enterprise, Nottingham University Business School. Elsen, C., & Leclercq, P. (2008). De l'esquisse à la maquette digitale : transformation des représentations graphiques en modèles numériques pour l'ingénierie de conception. Paper presented at RJC-IHM 2008, 4ème Rencontre des Jeunes Chercheurs en IHM, Cap d'Agde, France. Safin, S., Delfosse, V., Elsen, C., & Leclercq, P. (2008). Distributed Collaborative Design Studio : a sketch-based environment to support rich distant collaboration. Workshop. Paper presented at DCC 2008, Design Computing and Cognition Conference : Workshop "IT in Design", Atlanta, USA. Safin, S., Juchmes, R., Elsen, C., & Leclercq, P. (2008). From strokes to model: a bottom-up approach for sketching activities analysis. Workshop. Paper presented at DCC 2008, Design Computing and Cognition Conference : Workshop "Informing Computational Support for Conceptual Design : Lessons Learned from Sketching Studies", Atlanta, USA. Leclercq, P., & Elsen, C. (2007). Le croquis synthé-numérique. In P., Leclercq, G., Martin, C., Deshayes, & F., Guena (Eds.), Actes de la conférence SCAN, Séminaire de Conception Architecturale Numérique : Apports de l'image numérique en conception. Paris, France.