A Leather Necklace with Glass Charm Beads

A Leather
Necklace with
Glass Charm
Beads
01
Inspiration: 12092
02
Cut a piece of leather cord
measuring 160cm, and put a
metal link with a loop in the
middle.
03
Attach an eye pin in the loop
of the metal link.
04
Put a glass charm bead onto
the eye pin. Nip a bit off the
pin and twist to form a loop in
which you hang a pendant
plate before closing the loop.
A Leather Necklace with Glass
Charm Beads
07
05
Pull a metal link onto the
doubled over cord and then a
glass charm bead.
06
Luxury glass charm beads are pulled onto a soft
leather cord made from goat skin. Metal links with
a silicone post that works as “stop” on the
necklace.
Tie a knot at the end of each
cord. Pull on two beads.
Pull on a link in each side and
pull the opposite cord through
as well, stopping the bead.
Glue end caps onto the cord
ends.
Breloques en
verre, d: 13-15 mm,
harmonie de
rouges, 10assortis
68773
Corde de cuir,
épaisseur 2 mm,
noir, 4m
51552
Perle en métal, d:
10 mm, la taille du
trou 2 mm,
argenté, AP,
10assortis
63230
Perle en métal, d:
10 mm, argenté,
AP, 5pièces
63227
Breloques modes,
d: 21-28 mm, la
taille du trou 2-3
mm, argent
antique, Plaque,
40assortis
63705
Epingles à tête, L:
50 mm, argenté,
SP, 30pièces
602080
Epingles à tête, L:
50 mm, argenté,
SP, 300 pièces
602081
Embouts, d: 2,5
mm, argenté, SP,
10 pièces
613190
Embouts, d: 2,5
mm, argenté, FS,
100 pièces
613191