AVK UNDERGROUND FIRE HYDRANT 78/7370-75
Transcription
AVK UNDERGROUND FIRE HYDRANT 78/7370-75
AVK UNDERGROUND FIRE HYDRANT DAUPHINE 2 78/7370-75-80 Frost proof underground fire hydrant with symmetrical or Keyser outlet designed according to NF EN 14339 CN and NF S 61-211. Duck foot bend movable 360° and automatic drainage. Box is independent from the hydrant and bears handle and gaskets that prevent noise. CTO with 30 x 30 stem cap. Product description: Underground fire hydrant for use with water and neutral liquids up to 70°C. Standard: • Flange drilling according to ISO 7005-2 (ISO PN 10/16) and EN 1092-2 • Symmetrical outlet according to NFS 61-703 for DN 80 or DN 100 • Keyser outlet according to NFS 61-708 in DN 100 Certifications: • All material in contact with drinking water are certified in conformity to French regulations dated May 1997 • CE marking (+ NF for Keyser version) Tests: • Hydraulic test according to NFS 61-211 seat 18 bar - body 25 bar Features : • PN 16 bar • 2 DN: 80 or 100 • Opening by 30 x 30 stem cap • Frost proof • Counter clockwise to open (CTO) • Self draining system : an incomplete closing does not provoke continuous flow at the drain level. This system is equipped with a polymer protection preventing risks of • Retainer and drain are below the duck foot for an optimum frost proof construction • Easy installation: the duck foot can be oriented 360° and the box is independent from the hydrant and bears handle that make handling easier • The box has «noise absorbing» gaskets Accessoiries: • Turn key 7870900429 * * Keyser outlet version AVK France S.A.S. 4 rue de la Garbotière CS 2904 41029 Blois Cedex France Tél.: 02 54 74 23 13 E-mail : [email protected] www.avk.fr DROITS D'AUTEUR © AVK GROUP A/S 2011 / AVK France S.A.S. Version n° 37787370-75-80 BB AVK UNDERGROUND FIRE HYDRANT DAUPHINE 2 78/7370-75-80 H1 PV H2 L 123 List of components 1 2 3 4 5 6 6b 7 8 9 10 11 12 13 14 15 16 Lid Hydrant box Hydrant body Stem extender Hinge Keyser outlet (DN100) Symmetrical outlet (DN80 ou 100) Stem cap Stem Stem nut Stem extender nut Ecrou de manoeuvre Duck foot Stopper body Drain valve Clapet Retainer Ductile iron EN GJS 500-7 acc. to Ductile iron EN GJS 500-7 acc. to Ductile iron EN GJS 500-7 acc. to Galvanized steel Galvanized steel Brass acc. to EN 12164 Cupro Aluminum Ductile iron EN GJS 500-7 acc. to Stainless steel acc. to EN 10088-1 Bronze Ductile iron EN GJS 500-7 acc. to Brass acc. to EN 12164 Ductile iron EN GJS 500-7 acc. to Ductile iron EN GJS 500-7 acc. to Brass acc. to EN 12164 EPDM rubber Ductile iron EN GJS 500-7 acc. to EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating EN1563, in/out epoxy coating. + out Polyester coating Components can be substituted by equivalent or higher class materials References, n° et dimensions AVK ref. Outlet DN H1 mm H2 mm Pv mm L mm Theoretical weight kg 78-080-7370-111 Symmetrical 80 1000 1110 850 460 78 78-100-7375-121 Symmetrical 100 1000 1110 850 460 78 78-100-7380-121 Keyser 100 1000 1110 850 460 78 Se reporter à la section "informations techniques" pour toute information complémentaire. Les designs, matériaux et spécifications présentés peuvent être modifiés sans préavis en fonction des évolutions techniques.