Specification Sheet PDF

lumencove®
SPECIFICATION SHEET
COLOR CHANGING
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical :
• • • • • • • • • Low copper content extruded aluminum housing
Available in 1’, 2’, 3’, 4’ or 8’ sections
Electro-statically applied polyester powder coat finish
Tool-less LED frame adjustable mechanism
Low profile design
White standard stock finish
Indoor applications, dry location only
1 locking mechanism is included per fixture, installed.
(Two locks provided for 8ft sections.
Locking mechanism is made of unpainted steel).
Single feed option available for end of run fixtures
Wiring detail
Performance :
• • • • • • Video type tri-color leds, 105 lumens/ft
1 foot resolution minimum
Lumen maintenance L70 @ 25°C - 80,000 hrs
Lumen measurements comply with LM - 79 - 08 standard
Resolution per foot or per fixture (see page 6)
Operating temperatures: -25°C to 50°C
WHITE WIRE - NEUTRAL (N)
GREEN WIRE - GROUND ( )
BLACK WIRE - L (1)
BROWN WIRE - 0-10V / DATA - (2)
RED WIRE - 0-10V / DATA + (3)
Electrical :
• • • • • • Line voltage luminaire for 120 to 277V
Power and data in 1 cable (#16-5)
Up to 170 feet on 1 power/data feed
Up to 170 individually addressable 1 foot sections per DMX run
6W/ft
DMX 512 ready
3
3
13
3
"
" , 36 " , 47
" , 94
"
8 , 24 16
16
4
[314mm, 614mm, 914mm, 1214mm, 2406mm]
1
"
16
[78mm]
12
3
23 "
8
[60mm]
5 1"
8
[130mm]
1
"
16
[52mm]
2
5 year warranty
1/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
3
2 8
"
[60mm]
31 "
2
[89mm]
0-80° angle adjustment
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
FEEDING SIDE
POWER IN
RIGHT
110°
RF
Right Feeding side
standard clips shown
POWER IN
LEFT
110°
LED housing rotates
in a counter-clockwise direction
2/9
2013.10.18
EM - R23
LF
Left Feeding side
standard clips shown
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
LED housing rotates
in a clockwise direction
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
MOUNTING DETAILS
MINIMUM COVE DIMENSIONS
LED source
11
1
3
"
"
16
16
[94mm]
[104mm]
4
31
2"
[89mm]
23 "
8
[60mm]
to LED center
1
2"
[13mm]
2 3"
8
[60mm]
110°
110°
10" min.
[254mm]
1
44 " [108mm] max.
10" min.
[254mm]
1
4 4 " [108mm] max.
min. cove dimension
depends on sight line
min. cove dimension
depends on sight line
2" min.
[51mm]
2" min.
[51mm]
6 1 " min.
2
[165mm]
6 1 " min.
2
[165mm]
OUTWARD FACING
3/9
2013.10.18
EM - R23
INWARD FACING
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
PHOTOMETRICS
Lumencove® 4’
RGB
clear lens
Candela Table
Polar Candela Distribution
90o
0cd
Lamping
24.7 W
Lumens
421
Efficacy
17 lm/W
75o
42cd
60o
84cd
125cd
167cd
45o
0o
15o
Lumens
358
Efficacy
14 lm/W
166
166
5
15
163
152
163
152
163
154
164
157
165
160
25
135
136
139
143
148
35
111
113
118
124
131
45
80
82
89
97
106
55
65
48
23
50
25
57
29
64
34
74
41
75
8
9
10
13
16
85
1
1
1
1
2
1
2
1
2
0
75o
60o
71cd
107cd
45o
0o-180o
4.6 fc
10 ft
1.6 fc
20 ft
Candela Table
0.4 fc
0
22.5
45
Illuminance at Distance
67.5
Center Beam fc
90
0
141
141
141
141
141
5
15
139
129
139
129
139
131
139
133
140
136
25
115
116
118
122
126
35
94
96
100
105
111
45
68
70
76
82
90
55
65
41
20
43
21
48
25
54
29
63
35
75
7
8
9
11
14
85
1
1
1
1
2
1
2
1
2
0
90
15o
6 ft
12.8 ft (3.9 m)
1 fc @ nadir maximum distance
90o
0o
Center Beam fc
90
166
90o-270o
36cd
142cd
67.5
166
30o
0cd
24.7 W
45
166
Polar Candela Distribution
Lamping
22.5
0
90
0o-180o
Lumencove® 4’
RGB
frosted lens
0
Illuminance at Distance
30o
6 ft
3.9 fc
10 ft
1.4 fc
20 ft
0.3 fc
11.8 ft (3.5 m)
1 fc @ nadir maximum distance
90o-270o
Photometri c data based on test results from an independent NIST traceable testing lab.IES data is available at www.lumenpulse.com/en/support.
Always refer to our website download section for the latest updates of our IES files.
4/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
ACCESSORIES
Order separately
Control Systems:
LTO Lumentouch is a wall mount DMX 512 controller keypad
LCU Lumencue is a USB / mini SD DMX 512 controller
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specifi ed on all DMX applications.
Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
CBOX :
iCBOX-___V-___-___ Interior DMX 512 data box.
Data input and output, M20 provision holes with plugs.
Voltage input and output, M20 provision holes with plugs.
Up to six outputs to fi xtures, M20 provision holes with plugs.
Please specify desired input voltage and fi nish.
Refer to iCBOX specifi cation sheet for details.
CBOX-___V-___-___ DMX 512 data box.
Data input and output, M20 provision holes with plugs.
Voltage input and output, M20 provision holes with plugs.
Up to six outputs to fi xtures, M20 provision holes with plugs.
Please specify desired input voltage and fi nish.
Refer to CBOX specifi cation sheet for details.
Leader Cable :
LCSLCD___ Leader Cable for Lumencove® fixture.
Please add desired cable length : 6, 8 or 10 feet
Jumper Cable :
LCSJCD___ Jumper Cable for Lumencove® fixture.
Please add desired cable length : 1, 2, 4 or 8 feet
5/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
RESOLUTION DETAILS
1FT - Resolution per foot: each foot is addressed independently (recommended for most installations).
DMX ADDRESSES:
1,2,3
(color 1)
4,5,6
(color 2)
7,8,9
(color 3)
10,11,12
(color 4)
13,14,15
(color 5)
LCS 48 inches
16,17,18
(color 6)
19,20,21
(color 7)
22,23,24
(color 8)
LCS 48 inches
1FX - Resolution per fixture: each fixture is addressed independently
DMX ADDRESSES:
1,2,3
(color 1)
LCS 48 inches
4,5,6
(color 2)
LCS 48 inches
*Warning: resolution is a factory setting and cannot be changed in the field.
6/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
TYPICAL WIRING DIAGRAMS
Star Layout (DMX)
*Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit.
Standard fixture’s
end to end connection
(no jumper required)
Jumper cable 1ft
#16-5
CBOX
LCSLCD
#16-5
120-277V
DMX
input
120-240V
Lumentouch
Daisy Chain Layout (DMX)
Standard fixture’s
end to end connection
(no jumper required)
Jumper cable 1ft
#16-5
CBOX
120-277V
DMX
input
DMX
output
LCSLCD
#16-5
Maximum run length by 15A circuit - Lumencove® Color Changing
Cable length/Voltage
120-240V
2013.10.18
EM - R23
240V
277V
10ft leader cable
170ft
170ft
170ft
50ft leader cable
152ft
170ft
170ft
*Up to 170 individually addressable 1 foot sections per DMX run.
Consult factory for specific applications.
Lumentouch
7/9
120V
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
TYPICAL WIRING DIAGRAMS - Single Feed Option Shown
Star Layout
*Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit.
LCSLCD
#16-5
120-277V
CBOX ST
DMX
input
Standard fixture’s
end to end connection
(no jumper required)
Lumentouch
Jumper cable 1ft
#16-5
120-240V
Single Feed (SF) Option
(Plain end cap at fixture output side)
Daisy Chain Layout
LCSLCD
#16-5
CBOX DS
Standard fixture’s
end to end connection
(no jumper required)
120-277V
Jumper cable 1ft
#16-5
Lumentouch
DMX
input
Single Feed (SF) Option
(Plain end cap at fixture output side)
120-240V
Maximum run length by 15A circuit - Lumencove® Color Changing
Cable length/Voltage
120V
240V
277V
10ft leader cable
170ft
170ft
170ft
50ft leader cable
152ft
170ft
170ft
*Up to 170 individually addressable 1 foot sections per DMX run.
Consult factory for specific applications.
8/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
lumencove®
SPECIFICATION SHEET
COLOR CHANGING
HOW TO ORDER
LCS
RGB
Housing
Voltage
Length
Colors and
color
temperatures
Resolution
1
2
3
4
5
1
Lens
Feeding Side
Finish
Option
6
7
8
9
6
Housing:
Lens:
LCS - Lumencove
CL - Clear lens
®
FR - Frosted lens
2
7
Voltage:
Feeding Side:
120 - 120 volts
208 - 208 volts
Please specify one of the following:
240 - 240 volts
(Right Feeding side is standard unless otherwise specified)
LF - Left Feeding side
277 - 277 volts
RF - Right Feeding side
3
8
Length:
Finish:
12 - 12 3/8 inches (314mm) (0.72 kg/1.59 lbs)
WH - White (standard finish)
24 - 24 3/16 inches (614mm) (1.45 kg/3.19 lbs)
CC - Custom (please specify RAL color)
36 - 36 inches (914mm) (2.16 kg/4.77 lbs)
48 - 47 13/16 inches (1214mm) (2.57 kg/5.68 lbs)
96 - 94 3/4 inches (2406mm) (5.76 kg/12.72 lbs)
9
Option:
4
SF - Single Feed option
(Plain end cap at fixture output side)
Colors and Color temperatures:
RGB - Additive red, green and blue
5
Resolution:
1FT - Resolution per foot 1FX - Resolution per fixture 9/9
2013.10.18
EM - R23
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.