Specification Sheet PDF

Transcription

lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
Client:
Project name: Order #:
Type:
Qty:
FEATURES AND BENEFITS
Physical :
• • • • • • • • • Low copper content extruded aluminum housing
Available in 1’, 2’, 3’, 4’ or 8’ sections
Electro-statically applied polyester powder coat finish
Tool-less LED frame adjustable mechanism
Low profile design
White standard stock finish
Indoor applications, dry location only
1 locking mechanism is included per fixture, installed.
(Two locks provided for 8ft sections. Locking mechanism is made of unpainted steel).
Single feed option available for end of run fixtures
Wiring detail
Performance :
• • • • • • • Variable color temperature: 2700K - 6500K
1 foot resolution minimum
Lumen maintenance L70 @ 25°C - 80,000 hrs
21 LEDs/ft RO version (7x 2700K, 7x 4000K, 7x 6500K)
42 LEDs/ft HO version (14x 2700K, 14x 4000K, 14x 6500K)
Resolution per foot or per fixture (see page 6)
Operating temperatures: -25°C to 50°C
WHITE WIRE - NEUTRAL (N)
GREEN WIRE - GROUND ( )
BLACK WIRE - L (1)
BROWN WIRE - 0-10V / DATA - (2)
RED WIRE - 0-10V / DATA + (3)
Electrical :
• • • • • • Line voltage luminaire for 120 to 277V
Power and data in 1 cable (#16-5)
Up to 170 feet on 1 power/data feed
Up to 170 individually addressable 1 foot sections per DMX run
6W/ft - RO version, 12W/ft - HO version
DMX 512 ready
HIGH OUTPUT VERSION
3
"
4
[69mm]
3
13
3
3
12 8 ", 24 16" , 36 " , 47 16 " , 94 4 "
[314mm, 614mm, 914mm, 1214mm, 2406mm]
2
3
24 "
[69mm]
LOW OUTPUT VERSION
3
"
4
[121mm]
4
2 1 "
16
[52mm]
5 year warranty
1/8
2013.10.18
EM - R5
Lumenpulse, 1751 Richardson, Suite 1505, Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
[email protected] www.lumenpulse.com
Copyright © 2013 Lumenpulse
Lumenpulse reserves the right to make changes to this product at any time without prior notice
and such modification shall be effective immediately.
37"
16
[87mm]
2 3 "
8
[60mm]
0-80° angle adjustment
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
FEEDING SIDE
POWER IN
RIGHT
110°
RF
Right Feeding side
standard clips shown
POWER IN
LEFT
110°
LED housing rotates
in a counter-clockwise direction
2/8
2013.10.18
EM - R5
LF
Left Feeding side
standard clips shown
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
LED housing rotates
in a clockwise direction
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
MOUNTING DETAILS
MINIMUM COVE DIMENSIONS
LED source
11
1
3
"
"
16
16
[94mm]
[104mm]
4
31
2"
[89mm]
23 "
8
[60mm]
to LED center
1
2"
[13mm]
2 3"
8
[60mm]
110°
110°
10" min.
[254mm]
1
44 " [108mm] max.
10" min.
[254mm]
1
4 4 " [108mm] max.
min. cove dimension
depends on sight line
min. cove dimension
depends on sight line
2" min.
[51mm]
2" min.
[51mm]
6 1 " min.
2
[165mm]
6 1 " min.
2
[165mm]
OUTWARD FACING
3/8
2013.10.18
EM - R5
INWARD FACING
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
ACCESSORIES
Order separately
Control Systems:
LTO Lumentouch is a wall mount DMX 512 controller keypad
LCU Lumencue is a USB / mini SD DMX 512 controller
LID LumenID is a diagnostic and addressing DMX 512 controller.
It must be specifi ed on all DMX applications.
Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controller
with a push button rotary dial and live feedback.
CBOX :
iCBOX-___V-___-___ Interior DMX 512 data box.
Data input and output, M20 provision holes with plugs.
Voltage input and output, M20 provision holes with plugs.
Up to six outputs to fi xtures, M20 provision holes with plugs.
Please specify desired input voltage and fi nish.
Refer to iCBOX specifi cation sheet for details.
CBOX-___V-___-___ DMX 512 data box.
Data input and output, M20 provision holes with plugs.
Voltage input and output, M20 provision holes with plugs.
Up to six outputs to fi xtures, M20 provision holes with plugs.
Please specify desired input voltage and fi nish.
Refer to CBOX specifi cation sheet for details.
Leader Cable :
LCSLCD___ Leader Cable for Lumencove fixture.
Please add desired cable length : 6, 8 or 10 feet
Jumper Cable :
LCSJCD___ Jumper Cable for Lumencove fixture.
Please add desired cable length : 1, 2, 4 or 8 feet
4/8
2013.10.18
EM - R5
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
RESOLUTION DETAILS
1FT - Resolution per foot: each foot is addressed independently (recommended for most installations).
DMX ADDRESSES:
1,2,3
(color 1)
4,5,6
(color 2)
7,8,9
(color 3)
10,11,12
(color 4)
13,14,15
(color 5)
LCS 48 inches
16,17,18
(color 6)
19,20,21
(color 7)
22,23,24
(color 8)
LCS 48 inches
1FX - Resolution per fixture: each fixture is addressed independently
DMX ADDRESSES:
1,2,3
(color 1)
LCS 48 inches
4,5,6
(color 2)
LCS 48 inches
*Warning: resolution is a factory setting and cannot be changed in the field.
5/8
2013.10.18
EM - R5
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
TYPICAL WIRING DIAGRAMS
Star Layout (DMX)
*Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit.
Standard fixture’s
end to end connection
(no jumper required)
Jumper cable 1ft
#16-5
CBOX
LCSLCD
#16-5
120-277V
DMX
input
120-240V
Lumentouch
Daisy Chain Layout (DMX)
Jumper cable 1ft
#16-5
CBOX
120-277V
DMX
input
®
DMX
output
Maximum run length by 15A circuit - Lumencove RO DWH 6W/ft
LCSLCD
#16-5
120-240V
Cable length/Voltage
120V
240V
277V
10ft leader cable
170ft
170ft
170ft
50ft leader cable
152ft
170ft
170ft
®
Maximum run length by 15A circuit - Lumencove HO DWH 12W/ft
Lumentouch
120V
240V
277V
10ft leader cable
112ft
170ft
170ft
50ft leader cable
88ft
152ft
170ft
*Up to 170 individually addressable 1 foot sections per DMX run.
Consult factory for specific applications.
6/8
2013.10.18
EM - R5
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
TYPICAL WIRING DIAGRAMS - Single Feed Option Shown
Star Layout
*Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit.
LCSLCD
#16-5
120-277V
CBOX ST
DMX
input
Lumentouch
Jumper cable 1ft
#16-5
120-240V
Single Feed (SF) Option
(Plain end cap at fixture output side)
Daisy Chain Layout
LCSLCD
#16-5
CBOX DS
120-277V
Jumper cable 1ft
#16-5
Lumentouch
DMX
input
Single Feed (SF) Option
®
Maximum run length by 15A circuit - Lumencove RO DWH 6W/ft
120V
240V
277V
10ft leader cable
170ft
170ft
170ft
50ft leader cable
152ft
170ft
170ft
®
Maximum run length by 15A circuit - Lumencove HO DWH 12W/ft
120V
240V
277V
10ft leader cable
112ft
170ft
170ft
50ft leader cable
88ft
152ft
170ft
*Up to 170 individually addressable 1 foot sections per DMX run.
Consult factory for specific applications.
5 year warranty
7/8
2013.10.18
EM - R5
1.877.937.3003 P. 514.937.3003 F. 514.937.6289
120-240V
lumencove®
SPECIFICATION SHEET
DYNAMIC WHITE
PRELIMINARY
HOW TO ORDER
LCS
DWH
Housing
Voltage
Length
Colors and
color
temperatures
Resolution
Lens
Feeding Side
Finish
Option
1
2
3
4
5
6
7
8
9
1
6
Housing:
Lens:
LCS RO - Lumencove Regular Output 6W/ft
CL - Clear lens
LCS HO - Lumencove High Output 12W/ft
FR - Frosted lens
®
®
2
7
Voltage:
Feeding Side:
120 - 120 volts
Please specify one of the following:
208 - 208 volts
(Right Feeding side is standard unless otherwise specified)
LF - Left Feeding side
240 - 240 volts
RF - Right Feeding side
277 - 277 volts
8
3
Finish:
Length:
WH - White (standard finish)
12 - 12 3/8 inches (314mm) (0.72 kg/1.59 lbs)
CC - Custom (please specify RAL color)
24 - 24 3/16 inches (614mm) (1.45 kg/3.19 lbs)
36 - 36 inches (914mm) (2.16 kg/4.77 lbs)
48 - 47 13/16 inches (1214mm) (2.57 kg/5.68 lbs)
96 - 94 3/4 inches (2406mm) (5.76 kg/12.72 lbs)
9
Option:
SF - Single Feed option
4
Colors and Color temperatures:
DWH - Dynamic white color temperature
ranging from 2700K to 6500K.
5
Resolution:
1FT - Resolution per foot 1FX - Resolution per fixture 8/8
2013.10.18
EM - R5
1.877.937.3003 P. 514.937.3003 F. 514.937.6289

Specification Sheet PDF

Transcription

Documents pareils

lumenID™ kit