journée technique 03 octobre 2013
Transcription
journée technique 03 octobre 2013
JOURNÉE TECHNIQUE Oil and Gas 03 OCTOBRE 2013 INSTITUT DE SOUDURE ZI Paris Nord 2 – VILLEPINTE (93) Organisée par le service Membres industriels Objectif de la journée : Témoignages industriels concernant la fabrication des pipes (aciers haute résistance et alliages de nickel et assimilés), les CND dans l’offshore, les applications LNG, des expertises de rupture de pipes, l’utilisation de métaux d’apport super duplex et les pipes au tracé électrique. Enfin, deux techniques de soudage innovantes : le TIG Keyhole (K-TIG) et le TIPTIG, seront présentées dans le cadre d’applications Oil ans Gas, ainsi que les derniers développements dans les revêtements en alliage 625 (très faible dilution). Vos contacts : Catherine Levy - Tél. : +33 (0)6 82 89 70 48 [email protected] Frédéric Messager - Tél. : +33 (0)1 49 90 37 59 [email protected] JOURNÉE TECHNIQUE 2 du 03 octobre 2013 PROGRAMME PROGRAMME PROVISOIRE 2 Provisional programme 09h00 – 09h30 ACCUEIL Welcome - Coffee 09h30 – 10h00 Development of an AUT system to inspect 100% fillet and swaged full penetration welds. Application for an insulated pipeline for a deepwater project in West Africa : the AUT system has been qualified and deployed for onshore fabrication of the pipe-in-pipe joints. 1 – César ATIN, SUBSEA 7 10h00 – 10h30 Les grands projets d’usines GNL dans le monde World LNG plants projects 2 – Patrick GENOUD, ENTREPOSE PROJETS 10h30 – 11h00 Terminal méthanier de Dunkerque et présentation d’INNOCOLD et projets de recherche Dunkirk terminal and presentation of INNOCOLD and research projects 3 – Sylvain RINGOT, LNG DUNKERQUE / INNOCOLD – Arnaud HODENCQ, CMP Dunkerque – Edmont ABI-AAD – Robert LORANGE 11h00 – 11h15 PAUSE Break - Coffee 11h15 – 11h45 Failure of a 40” diameter crude oil pipeline 4 – Roland PALMER-JONES, PENSPEN INTEGRITY (UK) 11h45 – 12h15 Développement de tubes en acier à haute résistance pour les systèmes de forage Development of high strength pipes for drilling systems 5 – Frédéric Combaud, EUROPIPE 12h15 – 13h15 13h15 – 13h45 DÉJEUNER OFFERT dans les locaux de l’Institut de Soudure Lunch provided Fabrication et installation dans un environnement on shore d’un pipe-in-pipe tracé électrique Fabrication in an onshore environment of an electrically trace pipe-in-pipe 6 – Christian BONIGEN, ITP INTERPIPE 13h45 – 14h15 Two new techniques “Keyhole TIG” (K-TIG) and TIP TIG and their use in the oil ans gas industry 7 – Paul HOUSTON, WB ALLOYS (UK) 14h15 – 14h45 Techniques de soudage de différents alliages de nickel : soudage de l’Invar, du cupro-nickel et de tubes claddés en abordant les différentes technologies du cladding Techniques for welding Invar, cupro-nickel and clad tubes with a focus on cladding techniques 8 – Stéphane DAVEAU, BSL TUBES ET RACCORDS 14h45 – 15h00 PAUSE Break - Coffee 15h00 – 15h30 Automatic ultrasonic testing of circular welds with phased array (steels and CRA alloys) 9 – Olivier DILIGENT et Nicolas FEUILLY, SAIPEM SA 15h30 – 16h00 Optimisation of corrosion resistance and weldability – a challenge for super duplex filler metals 10 – Volker GROSS, BOHLER WELDING GROUP 16h00 – 16h30 Revêtement 625 en feuillard et ses dernières évolutions (très basse dilution) Alloy 625 cladding and recent developments (very low dilution) 11 – Mathieu DECHERF, BOHLER WELDING GROUP