Flowers decorated with Tissue Paper

Flowers
decorated with
Tissue Paper
01
Inspiration: 11920
02
Cut tissue paper into suitable
pieces, brush with Decoupage
Lacquer and put the flowers
onto the tissue paper.
03
Apply another coat of
Decoupage Lacquer and put
the other piece of tissue paper
on top. Press firmly.
04
Cut the tissue paper between
each flower.
Flowers decorated with
Tissue Paper
07
05
08
When dry assemble the
flowers to make a pine cone.
Two large, two medium, two
small and one very small
flower.
09
Apply a layer of Decoupage
Lacquer on both sides of the
flower before tearing the
tissue paper around them.
06
Make a hole in the middle of
the flowers with a needle.
10
Decorate the edges with a
Paper Pen. Let the flowers dry.
11
Assemble the pine cone. Cut
30cm of beading wire, attach
crimp beads and a wax bead
and feed the end of the wire
back into the crimp bead and
close. Cut off the end.
12
Flowers decorated with tissue paper and
assembled with beading wire and beads.
Tear whilst the lacquer is still
wet.
Trim the edges with
Decoupage Lacquer.
Put the four different sizes of
flowers onto the wire. Start
with the smallest plus two
beads. Then two flowers of
each size; small, medium and
large. Put two beads between
each flower.
Put on a crimp bead, a bead
and then another crimp bead.
Feed the end of the wire
through all three beads.
13
14
Tighten the beading wire so
the pine cone is tight. Close
the crimp bead.
Cut off the end.
15
Finally squeeze the top crimp
bead.
Papier découpage,
feuille 25x35 cm,
17 gr, Oslo, 8flles
assort.
25599
Carte, A4 210x297
mm, 250 gr, blanc,
10feuilles
219001
Set de
perforatrices
papier, dim.
25+49+75 mm,
240 gr, marguerite,
3assortis
112910
Squeeze Punch,
dim. L , d: 35 mm,
fleur, 1pièce
7016
Laque de
découpage, Mat,
100ml
392021
Laque de
découpage, Mat,
250ml
39202
Stylo à papier,
bronze gold, 25ml
24294
Perles de cire, d: 4
mm, la taille du
trou 0,7 mm, or,
150pièces
698321
Perles de cire, d: 8
mm, la taille du
trou 1 mm, or,
50pièces
698221
Perles de cire, d: 8
mm, la taille du
trou 1 mm, argent,
50pièces
698241
Perles à écraser, d:
2 mm, doré, CG,
100pièces
60106
Perles à écraser, d:
2 mm, argenté, SP,
100
60102
Fil à perles,
épaisseur 0,38
mm, or, 10 m
61585
Fil à perles,
épaisseur 0,38
mm, or, 100 m
61584
Pince coupante,
1pièce
13010
Pince à bec plat, L:
27 mm, l: 5 mm,
1pièce
13014
Another
Gloss Gel is here used for the
variant
edges
and then sprinkled with
silver glitter.