Sicherheitsdatenblatt allgemein englisch - C.Hilzinger
Transcription
Sicherheitsdatenblatt allgemein englisch - C.Hilzinger
__________________________________________________________________________________________________ Material Safety Data Sheet • C.Hilzinger-Thum GmbH & Co. KG Siemensstr.2 78532 Tuttlingen Germany • • • • Tel. 0049 7461 187-0 Fax 0049 7461 187-161 Email: : [email protected] http://www.hilzinger-thum.de • • Schleif- und Polierwerkzeuge Gummiwalzen und Kontaktscheiben • • Grinding and polishing tools Rubber rollers and contact wheels • ISO 9001 Effects on the health of workers and environmental considerations with the use of HTgrinding and polishing tool Raw material (in use) • • • • • • • • • • • sisal-cord and –cloth cotton cloth synthetic viscose based materials coated abrasive grinding belts, abrasive non-wovens tampico fibre abrasive and nylon filaments steel tubing and staples wood grey cardboard (centre packing) cover cardboard epoxy and polyurethane resins polyamides, dispersal bonding glues, dispersions on PVA and acrylic basis, polyurethanes, plant oils, resins, or combination of these After extensive questioning and the supply of all relevant safety documentation from our raw material suppliers we can confirm, that the use of HT grinding and polishing tools does not lead to detrimental or dangerous effects in terms of German legislation concerning dangerous substances. Our tools do not contain any substances that are classified as “dangerous” under this legislation. All synthetic materials are completely bonded in their chemical structure. Disposal of HT-Grinding and Polishing Tools We make every effort in the manufacture of our tools to reduce the waste content of our products to a minimum. The processed raw materials in our products are not soluble in water.Therefore, there is no need for a special supervision of waste material disposal, in the sense of need for a standard operating procedure (SOP) for disposal of this technical waste. We cannot influence the use of complementary materials with our products. These complementary materials are various polishing-grinding compounds, oils, fats, metal "stock"particles etc. As a result of this, we can not be held responsible or liable for the concurrent use of these materials – and are not able to issue information for the correct disposal or the classification of “possibily” dangerous materials. Here we strongly recommend that the waste disposal authorities are questioned regarding the best means of disposal / recycling. According to our current knowledge, the disposal of our products without complementary materials – is not problematic- and can be carried out in an incinerator.