Pinces de suspension pour réseaux torsadés autoportés 3
Transcription
Pinces de suspension pour réseaux torsadés autoportés 3
Chapitre 3 (Reseaux Aeriens Isoles BT).qxp 29/11/2011 11:24 Page 69 Pinces de suspension pour réseaux torsadés autoportés RÉSEAUX AÉRIENS ISOLÉS BT LV INSULATED OVERHEAD NETWORKS Suspension clamps for twisted self supporting networks Pinzas de suspensión para redes trenzadas autoportadas REDES AÉREAS AISLADAS BT PS ... Pinces de suspension pour torsade autoportée constituée par : Suspension clamps for self supporting bundle comprising : Pinzas de suspensión para cables trenzados autoportados, constituída por : PS .. PF • Un berceau support en acier galvanisé à chaud avec vis de serrage papillon fusible (5 mN) imperdable. Démontage et remontage ultérieurs par clé H 17. • Un insert thermoplastique à haute performance mécanique, climatique et diélectrique. • Option M : insert en acier inoxydable pour éviter toute usure par les vibrations (Ø 22 mm) PS .. PF • A hot dip galvanized steel body with a unloosable fusible (5 mN) wing nut. Removal and further installation by H17 wrench. • M option : stainless steel insert to avoid any abrasion due to the vibrations (Ø 22 mm). PS .. PF • Una cuña soporte en acero galvanizado en caliente con tornillo mariposa de apriete fusible (5 mN) imperdible. Desmontaje y nuevo montaje por llave H 17. • Una inserción termoplástica de altas características mecánica, climática y dieléctrica. • Opción M : anillo de acero inoxidable para evitar desgaste por vibraciones (Ø 22 mm). PSP 83 • Un berceau en matière isolante à haute tenue mécanique et climatique avec collier de serrage. PSP 83 • A high body climatic and mechanical resistant insulating material with tightening strap. PSP 83 • Un cuerpo de materia aislante de alta resistencia mecánica y climática con brida de apriete. • Un insert en acier inoxydable pour éviter toute usure par les vibrations (Ø 18 mm). • A stainless steel insert to avoid any abrasion due to the vibrations (Ø 18 mm). • Un anillo de acero inoxidable para evitar desgaste por vibraciones (Ø 18 mm). Palonnier en acier galvanisé à chaud, pour suspension en angles de déviation jusqu'à 60 ° Hot dip galvanized steel yoke for suspensions with deviation angle up to 60 ° . Yugo, en acero galvanizado en caliente, para suspensión en ángulos de derivación, de hasta 60° CONFORME A LA NORME VDE 0211. IN ACCORDANCE WITH VDE 0211 STANDARD. CONFORME A LA NORMA VDE 0211. • A high mechanical and climatic resistant insulating insert. PSY H 17 5 Nm PSP 83 PS .. PF 120 1 PSY 2 90 Réf. Ø torsade Version Bundle Ø Version Ø del haz Versión (mm) PSP 83 8 - 25 * Charge maxi Charge de rupture Maxi load Breaking load (mm) Carga máxima Carga de rotura (N) (N) Nbre de câbles Cable number Número cables ϕ (maxi) h (deg) (mm) 2 / 4 x (16 / 25 mm²) 30 115 60 2 000 5 000 e PS 19 PFA 1 15 - 23 4 x (16 / 25 mm²) 30 105 40 / 54 2 000 5 000 PS 19-2 PFA 2 12 - 19 2 x (16 / 25 mm²) / 4 x (16 mm²) 30 105 40 / 54 2 000 5 000 PS 27-2 PFA 2 2 x (35 / 50 mm²) 30 105 40 / 54 3 000 7 500 PS 27 PFA 1 22 - 27 4 x (35 mm²) 30 105 40 / 54 3 000 7 500 PS 30 PFA 1 27 - 30 4 x (50 mm²) 30 105 40 / 54 3 000 7 500 PS 33 PFA 1 31 - 33 4 x (70 mm²) 30 105 40 / 54 3 000 7 500 PS 40 PFA 1 37 - 40 4 x (95 mm²) 30 105 40 / 54 3 000 7 500 PS 43-2 PFA 2 2 x (95 mm²) 30 105 40 / 54 3 000 7 500 PS 33 PF 1 31 - 33 4 x (70 mm²) 45 125 48 / 64 3 500 8 750 PS 40 PF 1 37 - 40 4 x (95 mm²) 45 125 48 / 64 3 500 8 750 PS 43 PF 1 39,5 - 43,5 4 x (95 / 120 mm²) 45 125 48 / 64 3 500 8 750 PS 47 PF 1 42 - 47 4 x (120 / 150 mm²) 45 125 48 / 64 3 500 8 750 PS : Sur demande / On request / Previa petición : • Papillon non fusible / Non fusible wing nut / Mariposa que no sea fusible : (Réf. PS xx P). • Anneau inox "M" / Stainless steel ring "M" / Anillo inoxidable "M" : (Réf. PS xx PFM). * Capacité câbles torsadés et Télécom Capacity of twisted cables and “Telecom” / Capacidad de los cables trenzados y “Telecom”. Fr 0341 31 / 02-2005 23 h e ϕ maxi Ø 22 mm mini PS Standard Standard Standard groupe sicame B.P. N° 1 - 19231 POMPADOUR - CEDEX - FRANCE - Tél. (33) 05 55 73 89 00 - Fax (33) 05 55 73 63 12 - E-mail : [email protected] sicame Ø 22 mm mini PS Option M M option Opción M 3 - 67