facom aerospace

Transcription

facom aerospace

FACOM
AEROSPACE
FACOM
AEROSPACE
THE AERONAUTICAL STANDARD
PROTO : The American counterpart of Franco Américaine de Construction d’ Outillage à Main.
Following recent developments, the FACOM Group is able to complete its range with PROTO tools, a brand renowned
in America for quality products designed for use in industrial and aerospace sectors. PROTO’s products, such as ratchets,
ratchet wrenches and spline sockets, been developed to meet the standards of quality demanded by aeronautical
construction and maintenance professionals. Compliance with AS954, ASME B107-10M and other relevant standards
attests to the level of refinement and mechanical performance of these tools.
The high quality of PROTO products means that FACOM are now able to offer them to compliment the existing
Aerospace product range.
FACOM AEROSPACE
®
Facom services
Automatic missing
tool recognition
Controlled torque
Modular system of bicoloured foam trays
resistant to the various hydrocarbons, hydraulic
fluids and cleaning products.
Facom calibration laboratory accredited by
Cofrac.
Cofrac calibration certificates
Facom calibration certificates.
See Facom Control System p.32
CONTENTS
Ratchets/Sockets
P. 03
Lighting – T° measurement
P. 18
Torque control
P. 08
Storage
P. 22
Wrenches
P. 10
Tool sets
P. 24
Courtesy of: ©helimat.com
2
www.facom.com
Ratchets - Sockets
New
1/4» and 3/8» ratchets
for installing aircraft fasteners
5249XLHS
New
4749XLHS
65.PE
• Used with «Standard» 1/4»
and 3/8» square drive sockets.
The sockets are locked onto
square drive by a metal clip.
• The rarchet head includes a
hole for inserting a key to
prevent rotation of the fastener
during tightening.
• Ultra compact heads.
See page 14.
• Can be used on 1/4»
and 5/16» fasteners.
R 1/4» ratchets for aircraft fasteners
4749XLHS
ASME B 107-10M, ISO 3315, AS 4283
• For installing aircraft fasteners.
• Head and 1/4» square drilled to allow use with keys.
• Very compact head for improved accessibility.
• Increment : 8°.
• Head diameter : 21.5 mm
• Total head height : 18 mm.
• Length : 144 mm.
D : 115 g.
J 3/8» ratchet for aircraft fasteners
5249XLHS
ASME B 107-10M, AS 4283, SMT PPS 4222-631-033
• For installing aircraft fasteners.
• Head and 3/8» square drilled to allow use with keys
• Very compact head for improved accessibility.
• Head diameter : 33 mm.
• Total head height : 27 mm.
D : 400 g.
www.facom.com
3
Ratchets - Sockets
Metal handle and
Palm control
Ratchets
«METAL GRIP» RATCHETS
• Hydrocarbon-proof handle.
• High performance ratchet mechanism:
17 teeth in mesh during torquing.
• Access to all fasteners: 5° increments (only 1/72
of a turn).
17 teeth
PALM CONTROL RATCHETS.
• Comfort: the palm-control system allows the
operator to push down on the head of the ratchet
while avoiding accidental reversal.
5° increments.
Ideal in confined spaces.
Ratchets and accessories L 1/4»
R Metal-grip palm-control ratchet
ISO315, FED GGG W-641E, ANSI 107, 10M-82.
R.155 : Ratchet.
R.157 : Long-reach ratchet.
F
A
mm
B
mm
C
mm
D
mm
L
mm
R.155A
R.157A
25
25
18
18
27
27
11,5
11,5
113
155
g
100
100
FACOM AEROSPACE
1/4» long-reach metal-grip hinged palm-control ratchet
4
R.158A
Performance : to ISO 3315 ; DIN 3122 ; NF ISO 3315.
• Hinged handle with stiffened joint for optimum clearance.
• Satin chrome finish.
1/4» finger-control ratchet
R «Extra long-reach» 1/4» extension
R.150A
4763
Performance : to ISO 3315, DIN 3122, NF ISO 3315.
D : 95 g.
• Body diameter : 8 mm.
• Chrome finish.
D : 135 g.
3/8» locking ratchet
J.171
Performance : to ISO 3315, DIN 3122, NF ISO 3315.
• 5° increments.
• «Palm control» system.
D : 260 g.
www.facom.com
Ratchets - Sockets
3/8» long-reach locking ratchet
J.174
Strength to ISO 3315, DIN 3122, NF ISO 3315.
• 5° increments.
D : 320 g.
J Metal-grip palm-control ratchets
ISO 3315, DIN 3122, NF ISO 331, ASME B 107.10.
- J.155A : Ratchet.
- J.157A : Long-reach ratchet.
F
A
mm
B
mm
C
mm
D
mm
L
mm
J.155A
J.157A
30
30
20
20
31
31
16
16
190
260
J.155A
g
270
320
J.157A
3/8» long-reach metal-grip hinged palm-control ratchet
J.158A
• Hinged handle with stiffened joint for optimum clearance.
D : 360 g.
3/8» long-reach metal-grip hinged swivel-head ratchet
J.159A
• Spring-stiffened swivel head rotates fasteners from any angle
including in-line .
D : 375 g.
S Metal-grip palm-control ratchets
ISO 3315.
S.155A : Ratchet.
S.157A : Long-reach ratchet.
S.158A : Long-reach hinged ratchet with stiffened joint for
optimum clearance.
F
A
mm
B
mm
C
mm
D
mm
L
mm
S.155A
S.157A
S.158A
38
38
38
26
26
26
42
42
42
19
19
19
255
380
435
g
570
725
930
S.155A
S.157A
S.158A
www.facom.com
5
Ratchets - Sockets - Accessories
R 1/4» spline sockets
• Profile suitable for use on «high strength» splined screws.
- Compatible with 12-point and 6-point inch screws.
• Thin walls.
• High performance.
• Chrome finish.
F
4707SPL
4708SPL
4709SPL
4710SPL
4712SPL
4714SPL
N°
7
8
9
10
12
14
S"
d1
mm
d2
mm
t
mm
L
mm
7/32
1/4
9/32
5/16
3/8
7/16
8,6
9,4
10,85
11,5
13,8
15,65
10,9
10,9
10,85
11,5
13,8
15,65
6,6
7,4
7,4
8,3
8,7
11,2
23,4
23,4
23,4
23,4
23,4
26,5
g
8
8
8
9
14
20
4708SPL
4708DPL
Long-reach
R 1/4» long-reach spline sockets
F
4708DPL
4710DPL
N°
8
10
S"
d1
mm
d2
mm
t
mm
L
mm
1/4
5/16
9,4
11,5
10,95
11,5
6,9
8,3
50,9
50,9
g
16
23
u 1/4» 12-point OGVJ 1/4»
RB 1/4» 12-point inch OGVJ sockets
• Performance : to AS.954E.
• Used for aerospace applications.
F
FACOM AEROSPACE
RB.3/16
RB.7/32
RB.1/4
RB.9/32
RB.5/16
6
d d1
mm
7,6
8,7
9,7
10,6
11,9
d d2
mm
11,2
11,2
11,2
11,2
11,9
t
mm
4,8
5,5
6,0
6,0
6,5
L
mm
22
22
22
22
22
g
7,0
8,0
8,0
10,5
10,0
F
RB.11/32
RB.3/8
RB.7/16
RB.1/2
RB.9/16
d d1
mm
12,9
13,7
15,8
16,9
18,7
d d2
mm
12,9
13,7
14,8
16,0
17,5
t
mm
6,5
7,8
9,0
10,0
10,0
L
mm
22
22
22
22
22
g
11,5
14,0
17,0
18,5
22,0
d d1
mm
14,7
15,8
17,0
17,7
18,7
d d2
mm
14,7
15,8
17,0
17,7
18,7
t
mm
7,8
9
9,5
10
10
L
mm
22
22
22
22
22
g
17,7
19,4
23,2
23,7
26,1
DE 12-point metric OGV L 1/4» OGVJ sockets
• Performance : to ISO 2725-1, DIN 3124,
NF ISO 2725-1.
F
R.5,5E
R.6E
R.7E
R.8E
R.9E
d d1
mm
8,8
9,4
11
12,0
13,2
d d2
mm
11,2
11,2
11
12,0
13,2
t
mm
4,8
5,6
6
6,5
6,5
L
mm
22
22
22
22
22
g
8,4
8,6
9,2
11,5
14,3
F
R.10E
R.11E
R.12E
R.13E
R.14E
R.EL 1/4» long-reach 12-point inch OGV sockets
• Performance : to AS954E, ASME B 107.1.
• High performance, suitable for aircraft fasteners.
AS954E.
• Thinner socket walls for better accessibility.
• 12-point OGV profile ensuring :
- Reduced stress.
- Better protection of 6 and 12-point screw heads.
- High durability.
• Available as a rack set reference : REL.40U.
F
S
en ”
d d1
mm
d d2
mm
t
mm
L
mm
R.3/16EL
R.7/32EL
R.1/4EL
R.9/32EL
R.5/16EL
3/16
7/32
1/4
9/32
5/16
7,7
8,5
9,4
10,2
11,4
10,9
10,9
10,9
10,9
11,8
6
7,4
7,4
8,5
9
50
50
50
50
50
g
14
15
17
17
23
F
R.11/32EL
R.3/8EL
R.7/16EL
R.1/2EL
R.9/16EL
www.facom.com
S
en ”
11/32
3/8
7/16
1/2
9/16
d d1
mm
12,5
13,7
15,6
17,3
18,8
d d2
mm
12
12,8
14,3
16,2
17,1
t
mm
L
mm
9,7
11,2
11,9
13,8
16,2
50
50
50
50
50
g
25
32
40
45
49
Ratchets - Sockets - Accessories
Jeu de douilles REL sur rack
REL.40U
• Rack attaches to all supports : tool box compartments,
roller cabinet or tool panel.
• Simplifies the storage of a series of sockets well in view
and close to hand.
F
Dimensions
Rack
REL : 3/16 - 7/32 - 1/4 - 9/32 - 5/16
11/32 - 3/8 - 7/16 - 1/2 - 9/19
REL.40U
g
CKS.93 345
5016DPL
Long-reach
5212SPL
3/8» spline sockets
3/8» long-reach spline sockets
• Thin walls.
• Chrome finish.
• Thin walls.
• Chrome finish.
F
5212SPL
5214SPL
5216SPL
5218SPL
5220SPL
N°
12
14
16
18
20
S"
d1
mm
d2
mm
t
mm
L
mm
3/8
7/16
1/2
9/16
5/8
13,7
16,0
18,3
20,9
22,6
16,8
17,25
18,3
20,9
22,6
9,1
11,35
11,9
11,9
14,11
29,8
31,4
31,4
31,4
34,5
g
23
26
31
44
57
F
5012DPL
5014DPL
5016DPL
5018DPL
5020DPL
N°
12
14
16
18
20
S"
d1
mm
d2
mm
t
mm
L
mm
3/8
7/16
1/2
9/16
5/8
13,8
16,0
18,3
20,9
22,6
16,8
17,25
18,3
20,9
22,6
9,5
11,5
11,9
12,5
14,4
53,4
53,65
59,95
60,3
60,4
g
36
43
54
83
96
u 3/8» 12-point OGVJ 3/8»
JB 3/8» 12-point inch OGVJ sockets
• Performance : to AS.954E.
• Used for aerospace applications.
F
JB.1/4
JB.5/16
JB.11/32
JB.3/8
JB.7/16
JB.1/2
d d1
mm
9,7
11,7
12,7
13,7
15,6
17,6
d d2
mm
16,7
16,7
16,7
16,7
16,7
16,7
t
mm
6,0
6,8
6,8
7,5
9,0
10,4
L
mm
27
27
27
27
27
30
g
20
21
22
23
24
27
F
JB.9/16
JB.5/8
JB.11/16
JB.3/4
JB.13/16
JB.7/8
d d1
mm
19,6
21,6
23,6
25,4
27,4
29,4
d d2
mm
18,5
20,0
22,0
22,8
24,0
24,0
t
mm
10,5
12,0
13,0
15,0
16,0
16,0
L
mm
30
30
32
32
32
32
g
33
42
50
55
68
68
d d1
mm
22
23,4
24,7
26,0
27,2
28,5
29,7
31,0
31,3
d d2
mm
20
21,7
21,7
22,7
22,2
23,5
24,7
26,0
26,3
t
mm
12
13
13
14
15
16
16,5
16,5
16,5
L
mm
30
30
33
33
33
33
33
33
33
g
45
52
69
62
70
75
80
90
86
J L 3/8» 12-point metric OGVJ sockets
• ISO 1174, DIN 3120.
F
J.7
J.8
J.9
J.10
J.11
J.12
J.13
J.14
J.15
d d1
mm
11,0
12,2
13,5
14,7
16,0
17,2
18,3
19,5
20,8
d d2
mm
17,6
17,6
17,6
17,6
17,6
17,6
17,5
17,7
19
t
mm
6
6,5
6,7
7,8
9
9,5
10,4
10,5
12
L
mm
27
27
27
27
27
27
30
30
30
g
24
25
25
26
27
26
36
34
38
F
J.16
J.17
J.18
J.19
J.20
J.21
J.22
J.23
J.24
www.facom.com
7
Torque control
FACOM PROBAG !
Electromechanical wrench
Series E.240 - Series E.440
Electromechanical wrench
with radio frequency
torque transmission
HIGH PERFORMANCE
• Accurate to within +/- 4% in accordance with
ISO 6789.
• Long-lasting accuracy
(over 5,000 cycles).
• Intensive use: reliability of mechanism
tested to 100,000 cycles.
FACOM AEROSPACE
SAFE
• Pre-set non-graduated wrenches
for production applications.
• Torque set with a key and a torque meter,
no risk of incorrect operator adjustment.
8
E.240 series
E.440 series
www.facom.com
Torque control
Identification of correct and
incorrect torques
TRANSMISSION
OF APPLIED
TORQUE
PC DATA ANALYSIS
WORKSTATION
RECEIVER
WRENCH
Total traceability of data
• All torques are recorded,
the possibility of operator
transcription error is eliminated.
Date
Time
Wrench id
Torque
counter
Real torque
applied
Torque
Ok/Nok
Over
torque
27/01/2007
09:56:08:03
E101156
53412
176,3
OK
Non
27/01/2007
09:56:11:35
E101156
53413
181,1
OK
Non
27/01/2007
09:56:13:88
E101156
53414
260
NoK
Oui
27/01/2007
09:56:16:42
E101156
53415
178,4
OK
Non
27/01/2007
09:56:18:99
E101156
53416
179,5
OK
Non
27/01/2007
09:56:21:30
E101156
53417
172,9
OK
Non
27/01/2007
09:56:23:40
E101156
53418
178,6
OK
Non
27/01/2007
09:56:25:49
E101156
53419
176,4
OK
Non
27/01/2007
09:56:27:65
E101156
53420
197,9
NoK
Non
27/01/2007
09:56:34:84
E120013
32635
442
NoK
Oui
27/01/2007
09:57:34:12
E120013
32636
250
OK
Non
27/01/2007
09:59:51:07
E120013
32637
290
NoK
Non
27/01/2007
09:59:53:58
E120013
32638
261,5
OK
Non
27/01/2007
09:59:56:07
E120013
32639
231,5
OK
Non
27/01/2007
10:00:25:03
E120013
32640
241,5
OK
Non
27/01/2007
10:00:27:51
E120013
32641
248,7
OK
Non
27/01/2007
10:00:29:94
E120013
32642
238,5
OK
Non
Complete control of
the production process
• The LED’s on the wrench warn the operator
when the applied torque is out of tolerance
• Errors are identified in real-time and corrected
as necessary
• Simultaneously displays up to 4 receivers.
• LED’s from the wrench are repeated on
the screen.
• Values are recorded in an Excel format.
• Wrench, receivers and system settings are
configured by Password Protected
access menus.
www.facom.com
9
Wrenches
3/8» Crowfoot - 12 Point AF
W GGG - C - 1507A..
• Thin walled 12 points.
• Designed specifically for aerospace applications.
• 3/8» Square drive.
• Sizes from 5/8 to 1»1/16.
F
B
mm
18,3
18,3
18,3
18,9
19,3
19,8
19,0
20,0
C
mm
24,2
26,3
29,2
31,1
33,8
37,7
35,9
39,5
D
mm
11,20
12,50
14,00
15,40
16,70
19,00
17,30
18,10
L
mm
19,05
20,20
21,40
22,60
25,00
26,20
24,20
27,00
D
g
40
44
53
56
67
77
68
84
FACOM AEROSPACE
4920FL
4922FL
4924FL
4926FL
4928FL
4930FL
4932FL
4934FL
A
en "
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1"1/16
10
www.facom.com
Wrenches
Ring wrenches
64 series
EXTRA LOW-PROFILE - IDEAL FOR CROWDED OR
TIGHT SPACES
• The compact ring head perfectly replaces the ratchet
and socket and provides the same features as an extra
low-profile ratchet.
• Extra narrow (T) for the tightest clearances.
• Optimised diameter (D) for an unbeatably compact
design.
• 5° increments.
• Ideal for low clearance applications.
• Enables quick tightening and loosening in the most
difficult conditions.
D
T
Ratchet ring wrenches
64 - Metric and inch 12 point
ratchet ring wrenches
ISO 1711-1.
• Ideal for use where access is difficult.
• Ultra-compact œring head.
• 5° increments.
F
64.6X7
64.8X9
64.10X11
64.12X13
64.14X15
64.16X18
64.17X19
64.21X23
A
mm
14,2
16,8
20,2
23
26,5
29,5
31,5
40
B
mm
17,2
20,2
21,8
24,8
29,5
33,5
33,5
46
C
mm
8
8,3
9,1
11,3
13,1
14,8
15,2
15,2
D
mm
8
8,7
9,7
11,8
13,7
15,7
15,9
15,9
E
mm
8
9,1
10,3
12,3
14,3
16,6
16,6
16,6
I
mm
6,3
6,5
7,3
8,2
9
9,9
10,3
13
• High performance, suitable for aircraft bolts.
J
mm
6,5
6,9
7,7
8,6
9,4
10,7
11,2
14,5
T
mm
3
3,2
3,6
4,2
4,7
5,4
5,4
5,4
L
mm
115
128
150
170
190
210
230
260
D
g
35
42
60
81
128
182
187
480
F
64.22X24
64.1/4X5/16
64.5/16X11/32
64.3/8X7/16
64.1/2X9/16
64.5/8X11/16
64.3/4X13/16
64.7/8X15/16
A
mm
40
14,2
16,8
20,2
23
29,5
33,5
40
B
mm
46
17,2
20,2
21,8
24,8
33,5
40
46
C
mm
15,2
8
8,3
9,1
11,3
14,8
15,2
15,2
D
mm
15,9
8
8,7
9,7
11,8
15,7
15,9
15,9
E
mm
16,6
8
9,1
10,3
12,3
16,6
16,6
16,6
I
mm
13
6,3
6,5
7,3
8,6
9,9
11,2
13
J
mm
14,5
6,5
6,9
7,7
9
10,7
13
14,5
T
mm
5,4
3
3,2
3,6
4,2
5,4
5,4
5,4
L
mm
260
115
128
150
180
210
245
260
D
g
480
35
42
60
116
182
307
480
64 - Metric and inch 12 point ratchet ring wrench sets
• Supplied as box, roll or module sets.
F
64.J4
64.JE6T
64.JU6T
Dimensions
U
10 x 11 - 12 x 13 16 x 18 - 17 x 19
8 x 9 - 10 x 11 - 12 x 13 N.38A-6B
14 x 15 - 16 x 18 - 17 x 19 mm
1/4 x 5/16 - 3/8 x 7/16 1/2 x 9/16 - 5/8 x 11/16 3/4 x 13/16 - 7/8 x 15/16
N.38A-6B
Y
H
D
kg
•
0,536
0,825
1,312
7-piece Metric 12 point ring wrench module
MOD. 64J7
• 7-piece 12-point ratchet ring-wrench module.
• Sizes: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 18 - 17 x 19 mm
• Tray : PL.608A.
D : 925 g.
www.facom.com
11
Wrenches
65 series
Offset heads
FACOM AEROSPACE
ACCESSIBILITY AND COMFORT
• The compact ring head perfectly replaces the
ratchet and socket and provides the same features as an extra low-profile ratchet.
• Head offset to 15° on each side.
• Distances the hand from the
operation.
12
TIME-SAVING
• 5° increments
- Ideal for low clearance applications.
- Enables quick tightening and loosening in
the most difficult conditions.
SAFE
• Recessed reversing levers avoid
any risk of accidental reversal while
in use.
• ISO 1711.
65 - 12-point metric and inch 15° angle head
ratchet ring wrenches
ISO 1711-1.
• Ideal for use where access is difficult.
• Ultra-compact ring heads angled at 15°.
• 5° increments.
• Integral reversing levers avoid any risk of accidental
reversal.
A
mm
B
mm
B’
mm
C’
mm
L
mm
g
65.6X7
65.8X9
65.10X11
65.12X13
65.14X15
65.16X18
65.17X19
65.21X23
6x7
8x9
10x11
12x13
14x15
16x18
17x19
21x23
14
17
20,2
23,4
26,9
29,8
31,8
40,1
17
6,3 6,5
20,2 6,5 6,9
22
7,3 7,7
25,5 8,2 8,6
29,8 9,0 9,4
34
9,9 10,7
34
10,3 11,2
46
13,0 14,5
115
128
150
170
190
210
230
260
30
42
62
90
130
187
208
430
65.22X24
22x24
40,1 46,5 13,0 14,5 260
424
F
C
mm
@
F
65.1/4X5/16
65.5/16X11/32
65.3/8X7/16
65.1/2X9/16
65.5/8X11/16
65.3/4X13/16
65.7/8X15/16
www.facom.com
A
en "
B
mm
B’
mm
C
mm
C’
mm
L
mm
g
1/4x5/16
5/16x11/32
3/8x7/16
1/2x9/16
5/8x11/16
3/4x13/16
7/8x15/16
14
17
20,2
25,5
29,8
34
40,1
17
6,3 6,5
20,2 6,5 6,9
22
7,3 7,7
26,9 8,6 9
31,8 9,9 10,3
40,1 11,2 13
46,5 13 14,5
115
128
150
180
200
245
260
30
44
62
108
169
291
419
Wrenches
65 - Metric and inch 15° angle head ratchet ring wrench sets
• Supplied as rack, roll or module sets.
65.JP6 - 8 à 19 mm
MOD.65J7 - 6 à 19 mm
3
mm
F
U
Y
kg
65.JP6
8x9 - 10x11 - 12x13 14x15 - 16x18 - 17x19
CK.65J1
-
-
0,830
65.JU6T
1/4x5/16 - 3/8x7/16 1/2x9/16 - 5/8x11/16 3/4x13/16 - 7/8x15/16
-
N.38A-6B
-
1,312
6x7 - 8x9 - 10x11 12x13 - 14x15 16x18 - 17x19
-
-
PL.608A
0,925
MOD.65J7
SBV Profile ratchet ring wrenches with 15° offset heads
• Profile designed for high torque nuts and bolts.
Compatible with 6 and 12 point AF & Metric fasteners.
• Heads offset to 15°.
• 5° working arc.
• High performance mechanism.
• Compact head design.
• Finish: Black chrome.
A
en "
F
S N°
SBV0709
SBV0810
SBV1214
SBV1618
SBV2022
SBV2428
SBV2630
SBV3236
7x9
7/32 x 9/32
8 x 10
1/4 x 5/16
12 x 14
3/8 x 7/16
16 x 18
1/2 x 9/16
20 x 22 5/8 x 11/16
24 x 28
3/4 x 7/8
26 x 30 13/16 x 15/16
32 x 34
1 x 1’1/8
B
mm
B"
mm
C
mm
C"
mm
L
mm
14,2
14,2
20,2
24,8
29,5
35,5
40
46
17,2
17,2
21,8
26,5
31,5
40
46
58,5
6,3
6,3
7,3
8,6
9,9
11,2
13
14,5
6,5
6,5
7,7
9
10,3
13
14,5
17
115
115
150
180
200
245
260
295
g
29
29
55
101
154
270
382
650
@
www.facom.com
13
Wrenches
65 PE series
Ratchet bit holder wrenches
FACOM PERFORMANCE
• Reversible ratchet system incorporated within
a compact ring head.
• Wrench angled at 15°.
• 5° increments
(6° for sizes 8 and 9).
• Small increments for a better increment-toperformance ratio.
• FACOM reversing lever.
FACOM AEROSPACE
ULTRA COMPACT AND PRACTICAL
• Spring clip bit attachment.
• Knurled head for easier pre-tightening.
• Used for installing 1/4» and 5/16» aircraft
fasteners.
14
1/4» - 5/16» bit holder wrench
65.PE
• Takes bits :
- Series 1 : hexagonal 1/4»
- Series 2 : hexagonal 5/16»
• Used for installing 1/4» and 5/16»
aircraft fasteners.
• 5° increments.
• Heads angled at 15°.
• Bits retained by spring-clip.
• Knurled head for fast pre-tightening.
• Length : 150 mm
D : 74 g.
Ratchet wrench and bit set
65.PEJ13
• Wrench 65.PE.
• 13 bits.
- x For Torx® Tamper Resistant screwsJ :
EXR.110 - EXR.115 - EXR.120 - EXR.125 - EXR.130 - EXR.140.
- à : Hexagon socket heads : EH.103 - EH.104 - EH.105 - EH.106.
- é : For Pozidriv® screw : ED.101T - ED.102T - ED.103T.
• BP.102.
• PL.367 A.
D : 400 g.
www.facom.com
Wrenches
67.JP9 wrench pouch
New
COMPACT
• Fits in the hand, pocket, tool box or roller cabinet…
PRACTICAL
• Hook eye and hanging clip.
• Quick tool size identification.
SAFE
• Tools «click» into place.
• Individual tool slots for automatic identification of missing tools.
Ratchet combination wrenches
67 Ratchet combination wrenches
ISO 1711-1
• Reversible ratchet system incorporated within a compact
ring head.
• Recessed reversing lever avoids any risk of accidental
reversal.
• Wrench offset to 15°.
• 5° increments (6° for sizes 8 and 9).
F
A
mm
B
mm
B’
mm
C
mm
C’
mm
D
mm
H
mm
L
mm
g
67.6
67.7
67.8
67.9
67.10
67.11
67.12
67.13
67.14
67.15
6
7
8
9
10
11
12
13
14
15
15
16,7
16,7
18,7
20,8
23
24,6
26,8
29
31
d 14
d 17
d 17
d 18,6
d 20,2
d 22
d 23,4
d 25,5
d 26,9
d 28,3
4
4,3
4,3
4,5
5
5,3
5,5
6,1
6,5
6,8
6,3
6,5
6,5
6,9
7,3
7,7
8,2
8,6
9
9,4
7,5
7,5
7,5
8
8,8
9,9
10,8
11,8
12,6
13,4
2,8
2,8
2,8
3
3,4
3,7
4
4,3
4,5
4,7
128
140
140
149
158
165
171
178
190
199
27
32
42
50
59
71
88
101
119
138
L
I
T
J
B
G
D
F
A
mm
B
mm
67.16
67.17
67.18
67.19
67.21
67.22
67.24
67.27
67.30
67.32
16
17
18
19
21
22
24
27
30
32
33
35,5
37,5
39,4
45,8
45,8
51,8
56,4
62,7
66,4
B’
mm
C
mm
C’
mm
D
mm
H
mm
L
mm
d 29,8 7,1 9,9
d 31,8 7,5 10,3
d 32,7 8,1 10,7
8,6 11,2
d 34
9
13
d 40,1
9
13
d 40,1
d 46,5 10 14,5
d 52,4 10,8 15,5
d 58,1 11,5 17
d 61,9 12,4 17,5
14,1
15,2
16,1
16,8
19,5
19,5
22,1
25
27
29,2
4,9
5,3
5,5
5,7
6,3
6,3
6,5
8,4
8,5
9,5
208
225
236
247
287,8
287,8
321
356,6
400,7
423,5
g
153
186
211
243
343
343
476
693
891
1079
67 Ratchet combination wrench sets
F
67.JP9
67J7
MOD.67J12
MOD.67XL
H
•
-
Y
CK.CLE
-
3
mm
kg
8-10-11-12-13-16-17-18-19
8-10-12-13-14-17-19
PL.652 8-9-10-11-12-13-14-15-16-17-18-19
PL.653
21-22-24-27-30-32
0,876
1,590
4,090
www.facom.com
15
Wrenches
Hinged ratchet combination wrench
67F series
Versatile, compact and ultra-efficient
FACOM AEROSPACE
ACCESSIBILITY AND COMFORT
• Overcomes the problems of tightening and
loosening in applications where the operator
must work blind.
• For maximum efficiency and working
comfort, the hinged head adapts to each
application.
• Hand remains clear, limiting the risk of
scratching or injury.
• Perfect grip. Improved torque transfer, faster
working.
16
VERSATILE RING HEAD
• The hinged ring head is ideally suited to applications requiring:
- An ultra-compact ratchet.
- An extra low profile wrench.
- Unrivalled manoeuvrability.
Hinged ratchet combination wrenches
67F Hinged ratchet combination wrenches
ISO 1711-1
• 180° wrench movement.
F
B
mm
B’
mm
C
mm
C’
mm
D
mm
H
mm
K
mm
L
mm
M
mm
67F.8
67F.9
67F.10
67F.11
67F.12
67F.13
16,2
18,2
20,3
22,5
24,8
26,8
d 16,7
d 18,6
d 20
d 21,8
d 23
d 25,2
4,3
4,6
5
5,4
5,8
6,1
6,5 7,8 3
6,9 8,8 3,1
7,3 9,3 3,4
7,7 10,2 3,8
8,2 10,8 4
8,6 11,8 4,1
13
14,6
16
17
18
19
127
131,5
136
141
147,5
154
8
9
10
11
12
13
g
35
45
52
64
78
94
F
B
mm
B’
mm
67F.14
67F.15
67F.16
67F.17
67F.18
67F.19
28,7
30,5
32,9
34,5
37
39,2
d 26,8
d 28,3
d 29,8
d 31,8
d 32,8
d 33,9
9-piece set of hinged ratchet combination wrenches
67F.JP9
• 9-piece set of hinged ratchet combination wrenches
• Sizes : 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18 - 19.
• Support ref : CK.CLE.
D : 1202 g.
www.facom.com
C
mm
C’
mm
D
mm
H
mm
K
mm
L
mm
M
mm
6,4 9 12,6 4,6
6,9 9,4 13,3 4,8
7,2 9,9 14,1 5
7,6 10,3 15,2 5,3
8 10,7 15,9 5,5
8,6 11,2 16,8 5,8
20
21
22
23
24
25
160
169
179
190
203
215
14
15
16
17
18
19
g
108
127
149
181
204
236
Wrenches
67S series
Accessibility first
EASIER SERVICING AND REPAIR
• Assists tightening and loosening
operations when working blind.
• Saves time, easy to use under
confined working conditions.
• Applications: automotive, working
around the engine block or gearbox,
instrument panel, steering rod, electrical
control panel.
UNBEATABLY ULTRA-COMPACT
• 40% more compact than a traditional
ratchet combination wrench.
• Fits into tighter, more restricted spaces.
• Ideal for applications where access is
limited.
67S Short ratchet
combination wrenches
Norme ISO 1711-1.
• Reversible ratchet system incorporated
within a compact ring head.
• Head angled at 13°.
• Recessed reversing lever avoids accidental reversal.
F
B
mm
B’
mm
C
mm
C’
mm
D
mm
H
mm
L
mm
M
mm
g
67S.7
67S.8
67S.9
67S.10
67S.11
67S.12
67S.13
67S.14
67S.15
67S.16
67S.17
16,2
16,2
18,2
20,3
22,5
24,3
26,8
28,7
30,5
32,9
34,9
d 16,7
d 16,7
d 18,6
d 20
d 21,8
d 23
d 25,2
d 26,8
d 28,3
d 29,8
d 31,8
4
4
4,4
4,8
5,2
5,3
5,8
6,2
6,5
6,8
7,2
6,5
6,5
6,9
7,3
7,7
8,2
8,6
9
9,4
9,9
10,3
7,8
7,8
8,8
9,3
10,2
10,8
11,8
12,6
13,3
14,1
15,2
2,8
2,8
2,9
3,3
3,7
3,9
4
4,4
4,5
4,7
5
90
90
93
95
103
106
108
115
119
123
127
7
8
9
10
11
12
13
14
15
16
17
22
22
29
35
44
51
63
77
88
105
117
6-piece set of short ratchet combination wrenches
67S.JP6
• 6-piece set of short ratchet combination wrenches.
• Sizes : 8 - 10 - 11- 12 - 13 - 14.
• FACOM Design Support.
• Support ref : CK.67SJ1.
D : 375 g.
www.facom.com
17
Lighting - Measurement
Lamps
779.CL2
Cordless inspection lamp
FVS: a smart professional
quality lamp
The power consumption of the LEDs of your FACOM FVS inspection lamp is
controlled by a microprocessor. This guarantees that the specified level of light
intensity is maintained for a maximum length of time, while avoiding a sudden
loss of brightness.
The service life of the NiMH batteries is optimised thanks to a temperature
sensor controlled by the microprocessor that avoids excessive over-heating of
the batteries and allows them to be fully charged, safely and without risk of
damage.
FACOM AEROSPACE
t 0.5 m
a
x
u
l
1,000 6 hours
s
for
charge
n
e
e
betw
18
Cordless LED inspection lamp
779.CL2
• Microprocessor controlled brightness and battery charge :
- Guarantees a constant brightness of 800 luxury for 6 hours
between charges
- Controlled charge ensures long battery life.
• 27 high-performance white LEDs.
• Brightness : 1,000 luxury at 0.5m.
• High impact-resistant reinforced casing.
• Low operating temperature.
• Low battery indicated by flashing light.
• Operator customization and identification system.
• Clickstopped hook for hanging and angling the lamp.
• Charger attaches to wall or workstation.
• Supplied with charger and 2 m long lead.
• Protection rating : IP 64.
• Impact resistance : IK 09.
• Mains power : 100-240 V.
• Charging time : 2 1/2 hours for 6 hours operation.
• Power supply unit with European 2 pin plug.
• Lamp dimensions : 263 x 50 x 50 mm.
D : 480 g.
www.facom.com
Microprocessor Inside
Lighting - Measurement
LED head lamp
779.FRT
• Fitted with 4 high-brightness LEDs.
• Washable removable strap.
• Normal and booster power settings (50 and 100 %)
for adjusting brightness and autonomy.
• Turns through 180°.
• Fitted with a 20 x 3 mm belt or helmet clip.
• Autonomy : approximately 50 hours in normal position,
20 hours in booster position+.
• Presented on a card with 3 AA alkaline batteries and an
interchangeable strap 779.FRT01.
D : 91 g.
Pen light
836
• Aluminium body and tube.
• Length : 137mm.
• Tube diameter : 14mm.
• Operates using two LR03 AAA (1.5 volt) batteries,
not included.
• Adjustable focal length.
• Supplied with wrist strap
• Replacement bulb reference : 836.AMP.
D : 29 g.
Laser thermometers
Combined electronic thermometer
DX.T10
• The DX.T10 can be used to perform either non-contact temperature measurements using the infrared thermometer in
association with the laser pointer, or contact temperature
measurements by connecting it to a type K thermocouple.
F
DX.T10
Longueur
mm
173
Largeur
mm
60,5
Hauteur
mm
38
g
225
DX.12 Temperature probes
F
DX.12-06
DX.12-08
DX.12-11
DX.12R
DX.12-15
DX.12-17
Désignation
Sonde souple
Sonde bracelet
Sonde à aiguille standard
Rallonge
Sonde contact surface
Sonde à air
www.facom.com
19
Storage
New
Tool bag
BS.T20
FACOM AEROSPACE
FACOM PROBAG
HIGH STRENGTH DESIGN
• Highly resistant 1,200 x 1,200 denier fabric.
• Rigid, waterproof tool compartment.
• Aluminium handle.
SAFE AND COMFORTABLE
• Leather grip.
• Shoulder strap with reinforced padded
shoulder.
• Closing flap.
HANDY STORAGE
• Elastic tool retaining strap.
• Special screwdriver partition.
• Easy access to the tool compartment.
• Large number of side pockets.
• Adjustable saw compartment with selfadhesive strips.
• Flap top storage pouch.
Tool bag
BS.T20
Sizes: 49 x 22 x 35 cm.
D : 2,79 kg.
20
www.facom.com
Storage
New
Facom Pro Box
THE PROFESSIONAL ANSWER
STURDY
• Reinforced polypropylene shell.
- Impact resistant.
- Resistant to common chemical agents.
• Metal wire hinges.
- Very durable.
• Safe, comfortable aluminium handle.
PROTECTION
• Flexible protective corner bumpers.
• Metal padlock latches.
EASE OF USE
• Portable tool tray.
• Securing straps in the lid.
- Can store bulky items
(saw frames, spirit levels, etc.)
51 cm bag
BP.P20
51 cm = 36 dmZ.
Sizes: 50,2 x 26,8 x 27,3 cm.
D : 2,32 kg.
66 cm bag
BP.P26
66 cm = 47 dmZ.
Sizes: 65 x 26,8 x 27,3 cm.
D : 2,94 kg.
www.facom.com
21
Storage
JET.XL
Roller cabinets
High performance and safety
Drawer
capacity
20/30 kg
Compatible
with the FACOM
Modular Storage
System
FACOM AEROSPACE
SAFE
• Bumpers on all 4 corners.
• Front of drawers made of composite
materials acting as additional bumpers.
• Rounded base providing ankle protection
during moving.
• Large diameter wheels (125 mm):
for easier manoeuvrability and a
reduced risk of overturning.
• Centralised folding-key locking
system.
MULTI-FUNCTIONAL WORKTOP:
• Integrated bi-material handle.
• Storage compartments for screws, nut, bolts, etc.
• Retaining lip.
• Can be fitted with a vice.
• Storage slots for up to 6 screwdrivers.
SELECTIVE DRAWER OPENING SYSTEM:
• Smooth opening and easy to use, simply by
lifting the handle.
• Fully opening drawers.
• Multi-position removable drawer partitions
secured by means of rubber studs providing
complete freedom of arrangement.
• Roller cabinet comes with a set of tags for easy
identification of drawer contents.
STRONG:
• Worktop designed for a static distributed load
of 900 kg.
• High performance drawer slides.
JET.5GXL
Roller cabinets
• Overall dimensions (including wheels and worktop):
L.780xD.520xH.970 mm.
• 9006 grey.
• 4 d 125 mm wheels : 2 fixed, 2 castors, one with brake.
Grey JET.XL five-drawer roller cabinet
JET.5GXL
• Drawer sizes : 2x60+2x130+1x270 mm.
• Effective drawer dimensions: L.569xD.421xH.60/130/270 mm.
• Drawer capacity : 20/25/30 kg.
Grey JET.XL seven-drawer roller cabinet
JET.7GXL
• Drawer sizes : 5x60+1x130+1x200 mm..
• Drawer capacity : 20/25/30 kg.
22
COMFORT AND FEATURES
JET.7GXL
www.facom.com
Storage
New
SAFETY LOCK SYSTEM
TRIPLE SECURITY
INTER-LOCKING DRAWERS
• No risk of over-turning. JET.XLS series roller cabinets incorporate
the SAFETY LOCK SYSTEM, preventing more than one drawer
being open at a time.
SELECTIVE DRAWER OPENING
• Simple and efficient. Lift the handle in the front of each drawer
to open.
CENTRAL DRAWER LOCKING
• Close all your drawers with a turn of a key.
Roller cabinets - safety range
• Incorporates a safety lock system to prevent more than one
drawer being opened at once to prevent tipping.
• Overall dimensions (including wheels and worktop):
L.780xD.520xH.970 mm.
• 4 Ø 125 mm wheels: 2 fixed, 2 castors one with brake.
• Grey 9006.
JET.6GXLS
JETXL six-drawer roller cabinet - safety range
JET.6GXLS
• Drawer sizes: 4x60+1x130+1x270 mm.
• Drawer capacity: 20/25/30 kg.
D : 74 kg.
JETXL eight-drawer roller cabinet - safety range
JET.8GXLS
• Drawer sizes: 6x60+2x130 mm.
• Effective drawer dimensions: L.569xD.421xH.60/130 mm.
• Drawer capacity: 20/25 kg.
D : 78 kg.
JET.8GXLS
u Worktop and wall-mounted cabinets
Wall unit - 1 drawer - 810 mm high
2201
Cabinet with vertical hanging and drawer sections.
• Central key locking of doors and
drawer.
• Worktop or wall-mounted (three
attachments provided).
• Dimensions:
width 720 mm * depth 280 mm *
height 810 mm.
Vertical storage section:
• Storage surface area: 1 mz.
• The bottom and the sides of the
cabinet, as well as the door linings are
perforated for hanging tools using
the CKS system.
• The two door leaves open to 180° for
maximum visibility and accessibility.
Drawer section:
• 1 fully-opening drawer with ballbearing slides.
• Effective drawer dimensions: 1 569 *
h 60 mm * d 210 mm.
www.facom.com
23
Specialist aeronautical tool sets
«Commercial airliner maintenance» sets
«Engine fitters»
set
CU.AE50
• Set designed for complete
in-hangar overhauls as well
as servicing work between
overhauls on wide-body aircraft fitted with SNECMA,
GE, PW or RR engines :
- AIRBUS A3xx, BOEING 7xx,
Mc Donnel Douglas DCxx.
• 153 tools.
D : 18,7 kg.
FACOM AEROSPACE
F
RB.40AU
R.240A
R.232
R.236
R.215
R.210
R.155A
JL.40U
J.1/2F-11/16F-3/4F-3/
8F-5/8F-7/16F-9/16F
JB.41AU
JB.40AU
J.240A
J.230
J.215
J.210
J.155A
J.145
J.120A
J.115
CLE.MDAM100
ARZ.5,5
APZ.A
APZ.B
ANP
AWP
Qty
10
1
1
1
1
1
1
10
7
5
6
1
1
1
1
1
1
1
1
6
1
1
2
1
4
AW
4
AN6,5X35
1
AN
3
Description
Sockets 3/16» to 9/16»
1/4» universal joint
Coupler 1/4»- 3/8»
Short-reach spinner handle
1/4» extension 150 mm long
1/4» metal-grip «palm-control» ratchet
«Junior» long-reach sockets 1/2» to 9/16»
Hinged sockets 1/2» - 11/16»- 3/4» - 3/8» - 5/8» 7/16» - 9/16»
Coupler 3/8»-1/4»
«Junior» extension 250 mm
Metal-grip hinged handle
Sliding tee
Metal-grip speed brace
Second cut locksmiths files
Round blade offset screwdriver
Dual-size offset screwdriver
Stubby screwdrivers for Phillips® heads 1X35 mm and 2X35 mm
Phillips® screwdrivers 1 2 3 and 4
Forged hexagonal blade screwdrivers for slotted
heads 4X100 - 5,5X150 - 6,5X150 - 8X200 mm
Stubby screwdriver for slotted heads
Round blade screwdrivers for slotted heads de
2.5x75 - 3.5x75 - 4x100 mm
F
86H.JU7
86H.JU6
834.R2
803.300M
64.3/8X7/16
55A.JU10
445.10
410.S
440.JU17T
192.16CPE
270.A
256.2,5
251A.JS9
208A.40CB
195.20CPE
193.16CPE
189.17CPE
187.18CPE
1830.1
181.25CPE
804
603E
234
231
34
6
CKS.91
JB.11/32
200C.26
200C.30
1
1
1
1
Set CU.AE50 supplied in
foam modules and JET.8GXLS
JETGXL.UAE50
• Engine fitters set CU.AE50 (153 tools) supplied in
a JET.8GXLS roller cabinet.
24
Qty
7
6
1
1
1
10
1
1
17
1
1
1
9
1
1
1
1
1
1
1
1
1
1
1
www.facom.com
Description
Folding set of hexagon keys 1/16» to 1/4»
Folding set of hexagon keys 5/32» to 3/8»
Inspection mirror 55 mm
Flexible stainless 2-sided rule
12-point ring wrench
Offset ring wrenches 1/4» to 1 1/4».
Locking-wire pliers
Connector pliers
1/4» to 1 1/4» combination wrench wallet set
«Piano wire» diagonal cutters
File card
Precision centre punch
Precision sleeved drift punches 1 to 6 mm
Heavyweight series adaptable tip mallet
Sheathed angled half-round nose pliers
Sheathed straight half-round nose «telephone» pliers
Sheathed round-nose pliers
Sheathed universal pliers
Extra-soft silk brush
Locking twin slip-joint multigrip pliers
19 blade feeler gauge
Hacksaw frame
Scriber
Three-square scraper
Midget open-end wrenches 1/4» - 11/32» - 3/8»
- 5/16» - 7/16» - 9/32»
Socket rack set
Sockets
Graphite handle riveting hammer
«Commercial airliner maintenance» sets
«Avionics» set
CU.AE51
• Major and minor in-hanger overhaul and servicing
of electrical equipment including control looms, supply
systems, interconnections and relays, lighting and audiovisual3.
F
RS
RP
Qty
3
2
R.LA
5
RB.40AU
R.240A
R.236
R.216
R.215
R.210
R.151
R.120A
AS.6L160T2
ARZ.5,5
APZ.B
ANP1X35
AWP
ANP0X75
AN
10
1
1
1
1
1
1
1
6
1
1
1
2
1
2
AW
4
85.JU10
841.0
840.1
839A.0
834.R1
826.1
10
1
1
1
1
1
82H.JU10
10
Description
Bits for Philips® slotted head 4 - 6.5 - 8 mm
Bits for PH 1 and 2
«Long-reach six-point sockets 1/4»-5/16»-3/8»7/16»-1/2»
Flexible socket extension 150 mm long
1/4» ratchet
Sliding tee
Needle file wallet set
Stubby screwdriver for Phillips® heads
Screwdriver for Phillips® heads 1 and 2
Screwdriver for Phillips® heads 0
Screwdrivers for slotted heads 2.5X75 and 3.5X75
Screwdrivers for slotted heads 4X100 - 5.5X150 6.5X150 - 8X200 mm
Wallet set of hexagon keys 33 to 183 mm
«Stubby» scissors
Electricians knife with wire stripper
Desoldering pump
Inspection mirror 36 mm
Mechanical retriever
Wallet set of hexagonal keys
1/16» to 3/8»
• 115 tools.
D : 7,23 kg.
F
445.8
410.S
Qty
1
1
405.15
1
34.JU13T
256.2,5
252.8
13
1
1
251A.JT9
9
208A.32CB
200C.26
1
1
Description
Locking-wire pliers
Connector pliers
Precision diagonal cutters,
axial cut
Roll set of open-end wrenches 3/16» to 11/16»
Precision chisel
Precision sleeved drift punches
1 to 6 mm.
Plastic-tip mallet
193.16CPE
1
Sheathed round-nose pliers
189.17CPE
188.16CPE
1830.1
183.20CPE
181.25CPE
140.AAW13
BV.21-10
113A.8C
1116B.BW
836
804
803.300M
234
163
144
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Sheathed flat-nose pliers
Sheathed angled half-round nose pliers
Standard carbon steel tweezers
Soldering iron stand
10» adjustable wrench
Dual-rating soldering iron (20/40W)
Pen light
Scriber
Wire stripper and cutter
Ultra-flat straight tweezers
www.facom.com
25
«Instrumentation» set
CU.AE52
FACOM AEROSPACE
• In-hanger inspection and servicing of console instrumentation,
electrical, electro-mechanical and electronic modules and systems function indicators.
• 86 tools.
D : 3,53 kg.
26
F
Qty
RB.40AU
10
F
R.240A
1
405.10
1
«Electronics» coaxial cutting pliers
R.236
1
251A
5
Drift punches 1-1.5-2-2.5-3 mm
R.215
1
200C.26
1
R.210
1
22.JU5T
5
Roll set of miniature open-end wrenches 3/16» to 9/16»
R.151
1
1/4» ratchet
194.12
1
Fine-wire strippers
R.150A
1
Finger-control ratchet
1830.1
1
AVE
3
Screwdrivers for slotted heads 3,5x100 - 4x100 - 5,5x150 mm
176A.CPY
1
Sheathed multigrip pliers
AS.6L160T2
6
142.2
1
15° angle-nose tweezers
AEF.J3
8
«Micro-Tech®» screwdrivers with case
1116B.BW
1
AWP
2
Screwdriver for Phillips® heads 1 and 2
836
1
Pen light
Description
803.300M
Qty
1
Description
834
1
Inspection mirror
841.1
1
Very short pointed scissors
431.MT
1
Microtech® narrow short-nose pliers
840.1
1
421
1
«Electronics» short sheathed flat-nose pliers
839A.0
1
Desoldering pump
403
1
«Electronics» sheathed half round-nosed pliers
835A
1
Spring hook
402
1
Sheathed half round-nose pliers
826.0
1
144
1
Ultra-flat straight tweezers
Wallet set of hexagonal keys 1/16» to 3/8»
139
1
End-cutting tweezers
85.JU10
82H.JU10
10
10
Facom
Control
System
voir p.32
www.facom.com
Airframe maintenance set
CU.AE53
• Inspection and servicing of airframes : surfaces, flap
actuators structures of wide-body aircraft.
• 145 tools.
F
RS
RP
RB.40AU
R.240A
R.232
R.236
R.215
R.210
R.155A
R.145
R.120A
JB.41AU
JB.40AU
J.LA
J.F
J.240A
J.230
J.215
J.210
J.155A
J.145
J.120A
J.115
CLE.MDAM100
AV.HT2B
ARZ.5,5
AF
AN
Qty
3
2
10
1
1
1
1
1
1
1
1
5
6
2
2
1
1
1
1
1
1
1
1
6
1
1
1
2
Description
Bits for slotted heads 4 - 6.5 and 8 mm
Bits for Phillips heads no. 1 and 2
Coupler 1/4»- 3/8»
Hinged handle.
Sliding tee
Long-reach sockets 7/16» and 3/8»
Hinged sockets 7/16» and 3/8»
Coupler 3/8»-1/4»
«Junior» sliding tee
110-250V voltage tester screwdriver
Screw starter for slotted heads
Stubby screwdriver for Phillips heads no. 1 and 2
AWP
3
Screwdrivers for Phillips® heads 1-2-3
AW
4
F
AN6,5X35
AN
ANP0X75
85.JU10
Qty
1
2
1
10
83H.JU10
10
826.1
815A
803.300M
55A.JU8
445.10
44.JU8
192.16CPE
34.JU13T
270.A
256.2,5
248.JT7
208A.32CB
200C.28
193.16CPE
188.16CPE
1830.1
181.25CPE
BV.21-10
1116B.BW
1712
843
841
234
150
JB.11/32
1
1
1
8
1
8
1
13
1
1
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
www.facom.com
Description
Stubby screwdriver for slotted heads 6.5x35
Screwdrivers for slotted heads 2x75 and 3x75
Screwdrivers for Phillips® heads 0
Wallet set of long-reach hexagonal keys 1/16»
to 3/8»
Vernier caliper to 1/10 mm
Ring wrenches 1/4» to 15 16/4».
Locking-wire pliers
Inch combination wrenches 1/4» to 1 1/4»
Spark-plug brush
Long drift punches
Plastic-tip mallet
2m Tape
Twin-blade electricians knife
Electricians scissors
Scriber
Standard straight tweezers
Sockets
27
«Cabin environment» set
CU.AE54
FACOM AEROSPACE
• Cabin layout, maintenance and repairs on passenger and cargo airliners :
lighting, trim, seats, and air-conditioning systems.
• 126 tools
D : 8,1 kg.
28
F
39.JU14T
44
34.JU13T
Qty
14
4
13
64
3
R.120A
R.210
R.215
R.240A
R.232
J.210
J.215
J.240A
J.120A
J.230
J.LA
1
1
1
1
1
1
1
1
1
1
2
AW
3
AN
AN4X35
AN0X75
AW
ANP
2
1
1
3
2
A3,5X100VE
1
APZ.B
ARZ.5,5
82H.JU10
1
1
10
Description
Short combination wrenches 1/8» to 11/16»
Open-end wrenches : 1/2x9/16 - 3/4x13/16 5/8x11/16 - 7/8x15/16
12-point ratchet ring wrenches : 1/4x5/16 3/8x7/16 - 1/2x9/16
Sliding tee
100 mm extension
150 mm extension
Coupler 1/4»- 3/8»
Coupler 3/8»-1/4»
«Junior» long-reach sockets 3/8» and 7/16»
Screwdrivers for slotted heads 4X100 - 5.5X150 6.5X150
Screwdrivers for slotted heads 2.5X75 and 3.5X75
Stubby screwdriver 4x35
Screwdriver for Phillips® heads 0 - 2
Screwdrivers 1x35 and 2x35 mm
1000V insulated screwdriver for slotted heads
3.5x100
Offset screwdriver
F
192.16CPE
181.18CPE
R.155A
J.155A
R.145
J.145
J.115
RB.40AU
JB.41AU
JB.40AU
85.JU10
188.16CPE
193.16CPE
405.12
1116B.BW
BV.21-10
839A.0
841.4
843
248
256.2,5
234
803.300M
836
410.S
445.8
200C.26
JB.11/32
www.facom.com
Qty
1
1
1
1
1
1
1
10
5
6
10
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
Description
Hinged handle.
Precision diagonal cutters
Desoldering pump
Bi-material electricians scissors
Twin-blade electricians knife
Long drift punches 2 - 3 - 4 mm
Scriber
Flexible stainless rule 300 mm
Pen light
Connector pliers
Locking-wire pliers
Sockets
«Line station»
set
CU.AE56
• Servicing of engine accessories,
airframes, electrical equipment
and circuits.
• 158 tools.
D : 16,26 kg.
F
STG
RS
RP
RB.40AU
R.240A
R.232
R.236
R.217
R.215
R.210
R.155A
R.145
R.120A
JL.40U
JB.41AU
JB.40AU
J.240A
J.230
J.215
J.210
J.155A
J.145
J.120A
J.115
AS.6L160T2
ARZ.5,5
APZ.B
ANP1X35
840.1
827.1
826.1
82H.JU10
815A
803.300M
68B
Qty
5
3
2
10
1
1
1
1
1
1
1
1
1
10
5
6
1
1
1
1
1
1
1
1
6
1
1
1
1
1
1
10
1
1
6
Description
File set
Driver bits 4 - 6.5 - 8 mm
Bits for Phillips® heads no. 1 and 2
Coupler 1/4»- 3/8»
Hinged handle
Sliding tee
Coupler 3/8»-1/4»
Stubby screwdriver for Phillips® headsJ 1
Ultra-slim magnetic retrievers
Ring wrenches : 1/2x9/16» 1/4x5/16» 3/4x13/16» 3/8x7/16» - 5/8x11/16» 7/8x15/16»
F
660A.12
445.10
827.1
826.1
82H.JU10
815A
803.300M
40.JU12
192.16CPE
270.A
256.4
252.10
248.JT7
22.JU5T
208A.40CB
193.16CPE
200C.32
ANP0X75
Qty
1
1
1
1
10
1
1
12
1
1
1
1
7
5
1
1
1
1
AW
3
AN
882A
188.16CPE
1830.1
181.25CPE
142.1
113A.10C
893.316
804
603E
500
376A
234
163
154
JB.11/32
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
Pack of ten 12 teeth/cm bimetal blades
Locking-wire pliers
Doigt magnétique extra-fin flexible
Doigt mécanique flexible
Clés mâles coudées de 1/16˝ à 3/8˝ en trousse
Pied à coulisse au 1/10 de mm
Réglet inox flexible 2 faces
Combination wrenches 1/4» to 15/16».
File card
4 mm precision centre punch
Precision chisel
Long drift punches
Roll set of miniature open-end wrenches 3/16» to 9/16»
Screwdrivers for slotted heads 4x100 - 5.5x150
and 6.5x150
Stubby screwdrivers 4x35 and 6.5x35
Scroll shears
Straight-shouldered tweezers
Rule
Hacksaw frame
Lock-grip pliers
Manual oil syringe
Scriber
Wire stripper and cutter
Straight tweezers
Sockets
Set CU.AE50 supplied in foam modules and JET.8GXLS
JETGXL.UAE56
• «Line station» set CU.AE56 supplied in foam modules in
JET.8GXLS roller cabinet.
www.facom.com
29
«Major overhaul» set
CU.AE57
• For regular major overhauls of engines, undercarriage, airframes and hydraulic systems of wide-body aircraft : AIRBUS,
BOEING, MC DONNEL DOUGLAS.
• 127 tools.
D : 14,87 kg.
F
RB.40AU
R.155A
R.145
R.120A
R.236
R.240A
R.210
R.215
R.232
JB.41AU
JB.40AU
JL.40U
J.155A
J.115
J.145
J.120A
J.210
J.215
J.240A
J.230
44.JU8
34
FACOM AEROSPACE
55A.JU8
68B
82H.JU10
APZ.B
RS
30
Qty
10
1
1
1
1
1
1
1
1
5
6
10
1
1
1
1
1
1
1
1
8
7
8
3
10
1
3
Description
«Radio» metal-grip ratchet
Hinged handle
Sliding tee
100 mm extension
150 mm extension
Coupler 1/4»- 3/8»
«Junior» metal-grip ratchet
Coupler 3/8»-1/4»
Open-end wrenches 1/4» to 1 1/4».
Open-end wrenches 1/4» - 11/16» - 3/8» - 5/16»
- 5/8» - 7/16» - 9/32».
Ring wrenches 1/2x9/16» to 7/8x15/16»
Ring wrenches : 1/2x9/16»-1/4x5/16»-3/8x7/16»
Offset screwdriver for Phillips® heads
Driver bits 4 - 6.5 - 8 mm
F
RP
188.16CPE
193.16CPE
187.16CPE
192.16CPE
410.S
445.10
815A
804
234
893.316
208A.40CB
248.JT7
256.2,5
252.10
826.1
834.R2
836
DRD.MD200EM
200C.32
ANP2X35
AWP
Qty
2
1
1
1
1
1
1
1
1
1
1
1
7
1
1
1
1
1
1
1
1
3
AW
4
AN3X75
RD.MD150EM
603E
JB.11/32
1
1
1
1
Description
Bits for Phillips® heads no. 1 and 2
Connector pliers
Locking-wire pliers
Scriber
Rule
Long drift punches
Precision chisel
Articulated mirror
Pen light
Half-round second-cut file 200 mm
Stubby screwdriver for Philips® head no. 2
Screwdriver for Philips® heads 1 - 2 - 3
Screwdriver for slotted head 3x75
Round second-cut file 150 mm
Hacksaw frame
Sockets
«Light aircraft
maintenance» set
«Engine and airframe» set
CU.AE10
• 118 tools.
D : 11,73 kg.
F
RB.40AU
R.155A
R.145
R.120A
R.210
R.215
R.240A
R.232
JB.41AU
JB.40AU
JB.11/32
J.155A
J.145
J.115
J.120A
J.210
J.215
J.240A
J.230
JL.40U
440.JU17T
34.JU13T
87H.JU8
Qty
10
1
1
1
1
1
1
1
5
6
1
1
1
1
1
1
1
1
1
10
17
13
8
Description
Hinged handle
Sliding tee
100 mm extension
150 mm extension
Coupler 1/4»- 3/8»
Sockets
Coupler 3/8»-1/4»
1/4» to 1 1/4» combination wrench wallet set
Short hexagon key ring-set
F
188.20CPE
193.16CPE
192.16CPE
445.10
803.300M
804
815A
208A.32CB
256.2,5
252.10
248.JT7
234
834.R1
827.1
836
200C.28
ANP2X35
AN5,5X35
AWP
Qty
1
1
1
1
1
1
1
1
1
1
7
1
1
1
1
1
1
1
3
AW
4
AN3X75
1
www.facom.com
Description
Locking-wire pliers
Plastic-tip mallet
Precision chisel
Long drift punches
Scriber
Articulated mirror
Magnetic retriever
Pen light
Stubby screwdriver for Philips® head no. 2
Stubby screwdriver for slotted head 5.5x35
Screwdriver for Phillips® heads 1 - 2 - 3
«Military aircraft
maintenance» sets
«Maintenance mechanic» set
CM.AE22
• 115 tools.
D : 13,05 kg.
F
40.JE14
55A.JE8
113A.10C
R.120A
R.236
R.210
R.215
R.240A
R.232
J.120A
J.210
J.215
J.240A
J.230
JB.40AE
JB.41AE
AN3X75
AWP
AW
AW
ANP2X35
AFU.1
AFUX.1
AKZ.6
APZ.B
82.JL10
Qty
14
8
1
1
1
1
1
1
1
1
1
1
1
1
8
6
1
3
4
1
1
1
1
10
Description
Combination wrenches 7 to 24 mm
Ring wrenches 8 to 26 mm
Sliding tee
Short-reach spinner handle 155 mm
Coupler 1/4»- 3/8»
Sliding tee
Coupler 3/8»-1/4»
«Junior» sockets 7 to 14 mm
«Junior» sockets 15 to 21 mm
Screwdriver for Phillips® heads 1 - 2 - 3
Screwdrivers for slotted heads 4x35 - 6.5x35
Stubby screwdriver for Phillips® head no. 2
Screw starter for slotted heads
Screw starter for cross-heads
Offset screwdriver for slotted heads
Offset screwdriver for Phillips® heads
Hexagon keys
F
Qty
1
1
1
1
1
1
1
6
1
1
2
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
Description
Compact lock-grip pliers
Shears
Hacksaw frame
Plastic-tip mallet
Forged chisels 15 and 18 mm
Scriber
Rule
Stainless 2-sided rule
File card
Pen light
Hinged handle
«Radio» sockets 5.5 to 14 mm
Connector pliers
Locking-wire pliers
F
Qty
1
1
1
1
1
1
1
1
6
1
1
1
8
1
1
1
10
1
1
1
1
1
Description
Sheathed half round-nose pliers
«Electronics» sheathed half round-nosed pliers
Desoldering pump
Bi-material electricians scissors
Spark-plug brush
«Micro-Tech®» screwdrivers with case
Straight tweezers
Hinged handle
«Radio» sockets 5.5 to 14 mm
Articulated mirror
Pen light
Locking-wire pliers
188.16CPE
193.16CPE
192.16CPE
187.16CPE
507A
983.8
603E
CLE.MDAM100
208A.32CB
256.2,5
262A
234
893.316
803.300M
804
270A
836
J.155A
R.155A
R.145
J.145
J.115
RB.40AE
410.S
445.10
200C.28
«Instrument electricians» set
CM.AE21
• Maintenance and overhaul of electrics, optical equipment,
flight controls on fighters, bombers and other aircraft.
• 98 tools.
D : 6,25 kg.
F
39.JE16T
34
R.120A
R.236
R.210
R.215
R.240A
AN
AW
AN4X35
AWP
ANP0X75
ANP
ARZ.4
APZ.A
82.JL10
193.16CPE
181.CPE
405.12
431.MT
401
Qty
16
6
1
1
1
1
1
2
3
1
2
1
2
1
1
10
1
1
1
1
1
Description
Roll set of combination wrenches 3.2 to 17 mm
Open-end wrenches 3.2-4-5-5.5-6-7 mm
Sliding tee
100 mm extension
150 mm extension
Screwdrivers for slotted heads 2x75 - 3x75
Screwdrivers for slotted heads 4X100 - 5.5X150
- 6.5X150
Stubby screwdriver for slotted head 4x35
Screwdriver for Phillips® heads 1 - 2
Screwdriver for Phillips® head no. 0
Screwdriver for Phillips® heads no. 0x35 - 1x35
Round blade offset screwdriver 4 mm
Dual-size offset screwdriver for Phillips® heads
Hexagon keys
Precision diagonal cutters
Short-nose pliers
Flat-nose pliers
402
403
1116B.BW
BV.21-10
200C.26
839A.0
841.4
840.1
AS.6L160T2
803.300M
804
270.A
AEF.J3
149
R.155A
R.145
RB.40AE
834.R1
826.0
836
1830.1
445.8
www.facom.com
31
Foam
module
Facom Control System
AUTOMATIC MISSING TOOL
IDENTIFICATION
Two-coloured modular system of
foam tool trays designed to resist a
wide range of hydrocarbons, hydraulic
fluids and cleaning products.
• Safety: A separate space for each
tool prevents them being left
in sensitive areas.
• Productivity: Tools quickly located
and immediately returned after use.
Avoiding loss.
• Speed: Missing tools identified at a
glance.
Foam module of combination
wrenches
Foam module
of 1/2» Socketry
MODM.40-1
MODM.S1A
• Comprising:
40.6 - 7 - 8 - 9 - 10 - 11 12 - 13 - 14 - 15 - 16 - 17 18 - 19 - 22 - 24 mm.
• Tray: PM.MOD40-1.
• Comprising:
- S.161, S.240A, S.210, S.215,
S.120A
- S.H8, 10, 11, 12, 13, 14, 15, 16, 17,
18, 19, 21, 22, 23, 24, 27, 30, 32 mm.
- TAG
- Tray PM.MODS1A.
D : 3,45 kg.
MODM.40-2
• Comprising:
40.27 - 29 - 30 - 32 mm.
• Tray: PM.MOD40-2.
Foam modules
of sheathed drift
punches
MODM.CG
• 6 drift punches
249G: 2-3-4-5-6-8 mm.
• 4 nail sets 247G:
4-5-6-8 mm.
• 1 centre punch 255.G6.
• Tray PM.MODCG.
D : 1,47 kg.
Foam module
of metric
1/4» Socketry
Foam module of
impact tools
MODM.R1A
• Comprising:
- R.161, R.240A, R.209, R.215, R.120A.
- R.5,5, 6, 7, 8, 9, 10, 11, 12, 13,
14 mm. R.235, R.236 - EP.101T, 102T,
103T - ED. 101T, 102T, 103T
- ES.134,5T, 136,5T, 148T - EH.103,
104, 105, 106, 107.
- EXR.115, 120, 125, 127, 130, 140.
- 83SH.2,5, 3, 4, 5, 6, 7, 8, 9, 10 mm.
- TAG
- Tray PM.MODR1A.
D : 1,095 kg.
208A.32CB Mallet
263.20 Chisel
256.6 Centre punch
248. Long drift
punches 4-5-6 mm
D : 1,8 kg.
MODM.MI1
MODM.MI3
MODM.MI4
200H.40 Hammer
Tray PM.MODMI1.
205H.100 Hammer
Tray PM.MODMI3.
202.A1 Hammer
Tray PM.MODMI4.
YOUR RETAILER
Réf. 13191.25
FACOM AEROSPACE
Modules compatible with JET.XL and
CHRONO.XL roller cabinets.
Dimensions: 420 x 190 x 55 mm.
B.P. 99 - 6, rue Gustave Eiffel - 91423 Morangis Cedex - France
Tél. : 01 64 54 45 45 - Fax : 01 69 09 60 93
Internet : www.facom.com

facom aerospace

Transcription

Documents pareils

Casino Machine A Sous Jeux En Ligne France

3. 3. - Christiani

Casino En Ligne Belge Code Bonus Sans Depot

N61 - Spaenaur

House system presentation set PS-02 Your logo

The most installed station in Europe

Leidenfrost on a ratchet - PMMH

PRO-CRIMPER III Hand Crimping Tool Assembly

Pre-setting: M2

Procédure de graissage et changement de joints 1