Casino En Ligne Belge Code Bonus Sans Depot

214289 Heart Head Pin
Earrings
SUPPLIES & TOOLS:







Adorna Heart headpin
6 mm crystal rondelle
8/0 metal seed bead spacer
Adorna Heart Earwire
Round Nose Plier
Chain Nose Plier
Side Cutters
DIRECTIONS:
1. String one (a) 8/0 metal bead spacer, (b) 6 mm crystal rondelle (c) 8/0 metal bead
spacer (d) 6mm crystal rondelle (e) 8/0 metal bead spacer (f) 6mm crystal rondelle (g)
8/0 metal bead spacer onto your Adorna Heart headpin.
2. Using your chain nose pliers make a 90 degree bend, about an eighth of an inch above
your bead.
3. Grip your headpin at the 90 degree bend with your round nose pliers. Keep the pliers
vertical so that one barrel of the plier is above the wire and the other barrel is below the
wire.
4. With your finger, push the wire up and over the top barrel. Reposition the plier
horizontal with one barrel in the loop and one barrel out of the loop.
5. Continue to push the wire around until it makes a whole loop.
6. Without moving the pliers, wrap the wire around the straight length of wire just below
your loop, approximately three times. Remove the pliers from the loop.
7. Trim any excess wire with the pair of side cutters.
8. Attach a Adorna Heart Ear Wire. Enjoy your Earrings!
Courtesy of Bead buddy.net
Disclaimer: Please read and follow all manufacturers’ instructions for all
tools and materials used. Not a toy. Keep away from children.