Protocole, Caractérisation mécanique et structurale

Référence de THÈSE
169
A
[ALB89]: N. Alberola, Spectrométrie mécanique et mobilité moléculaire dans le
polyethylene. Application: nouvelle approche microstructure, Thèse à l’université Lyon1,
1989, 241P.
[AND85]: J. Andrew et al, Crystallographic Changes in Cryogenically Pulverized Polymers,
Journal of Polymer Science: Polymer Physics Edition, 1985, Vol. 23, P: 1449-1466.
[ANN00]: V. Annadurai et al, Small Angle X-ray Scattering in Nylon 6 using Exponential
Distribution of Phase lengths, Polymer, 2000, Vol. 41, P: 5689-5694.
[ARC04]: V.M. Archodoulaki, S. Lüftl, S. Seidler, Thermal degradation behaviour of
polyoxymethylene: 1. Degradation and stabilizer consumption, Polymer Degradation and
Stability, 2004, accepted 20 march 2004.
[ARI01]: A.B. Ariawan, S. Ebnesajjad, S.G. Hatzikiriakos, Performing Behavior of
Polytetrafluoroethylene Paste, Powder Technology, 2001, Vol. 121, P: 249-258.
[ASC96]: J.L. Ascione, Propriétés Physiques et Mécaniques du POM et du PEEK 450 CA30,
PFE au GEMPPM-INSA de Lyon, 1996, 80P.
B
[BAL90]: F.J Baltá-Calleja, C.S. Cruz, R.K. Bayer and H.G. Kilian, Microhradness and
Surface Free Energy in Linear Polyethylene: The Role of entanglement, Colloid and Polymer
Science, 1990, Vol. 268, P: 440-446.
[BAL95]: F.J Baltá-Calleja, L. Giri, I.M. Ward, D.L.M. Cansfield, Microstructure of Bulk
Crystallized Linear Polyethylene: Correlation of Microhradness and Yield Stress, Journal of
Materials Science, 1995, Vol. 30, P: 1139-1143.
[BEN03]: H. Benabdallah, Friction and wear of blended polyoxymethylene sliding against
coated steel plates, Wear, 2003, Vol. 254, P: 1239–1246.
[BIG77]: D.M. Bigg, A Study of the Effect of Pressure, Time, and, Temperature on highPressure Powder Molding, Polymer Engineering and Science, 1977, Vol. 17, N0 . 9, P: 691699.
[BLE04]: M. Blein, Mise en Forme des polymères par compactage grande Vitesse, Stage de
DEA au GEMPPM- INSA de Lyon, 2004, 90P.
[DES01]: A. Deschamps, L. David, M. Nicolas, F. Bley, F. Livet, R. Séguéla, J.P. Simon, G.
Vigier, J.C. Werenskiold, Recent developments in Small-Angle X-ray Scattering for the study
of metals and Polymers, Advanced Engineering Materials, 2001, Vol. 3, P: 579-586.
[BET91]: A. Benatmane, Etude du Vieillissement Physique du PET Amorphe et Semicristallin, THÈSE à INSA de Lyon, 1991, 185P.
[BOE72]: E. BOEHME, Études sur la structure de l’acétal homopolymère et applications
pratiques. Document technique, Genève : Du Pont de Nemours, 1972.
170
[BOH64]: V.L. Bohn, Die Einfriertemperatur des Polyoxymethylenes, Kolloid-Zeitschrift und
Zeitschrift für Polymere, 1964, Vol. 201, P: 20-23.
[BOY85]: R. H. Boyd, Relaxation Processes in Crystalline Polymer: Experimental
Behaviour- a review, Polymer, 1985, Vol. 26, P: 323-347.
[BUC69]: A. Buckley and H.A. Long, The Extrusion of Polymer Below Their Melting
Temperatures by the Application of High Pressures, Polymer Engineering and Science, 1969,
Vol. 9, N0. 2, P: 115-120.
C
[CAR63]: G. Carazzolo and M. Mammi, Crystal Structure of a New Form of
Polyoxymethylene, Journal of Polymer Science: Part A, 1963, Vol. 1, P: 965-983.
[CAR00]: M. Carrega et coll. Matériaux Industeriels Matériaux Polymères, Paris : Dunod,
2000, 645P.
[CHI92]: W.Y. Chiang, C.Y. Huang Polyacetal/Polytetrafluoroethylene Blend-II. The Effect
of Chemical Surface Treatment of Polytetrafluoroethylene, European Polymer journal, 1992,
Vol. 28, P: 583-580.
[CLA67]: E.S. CLARK, Molecular orientation in injection molding of acetal homopolymer,
SPE Journal,1967, vol. 23, No 7, P: 46-49.
[COA78]: P.D. Coates and I.M. Ward, Hydrostatic Extrusion of Polyoxymethylene, Journal
of Polymer Science: Polymer Physics Edition, 1978, Vol. 16, P: 2031-2047.
[COT00]: H. Cottin, M.C. Gazeau, J.F. Doussin, F. Raulin, An Experimental Study of the
Photodegradation of polyoxymethylene at 122, 147 and 193 nm, Journal of Photochemistry
and Photobiology A: Chemistry , 2000, Vol. 135, P: 53–64.
[CRU91]: C.S. Cruz et al, Novel Aspects in the Structure of PET as Revealed by Means of
Small Angle X-ray Scattering, Macromolecules, 1991, Vol. 24, P: 5980-5990.
[CRU93]: C.S. Cruz et al, Plastic deformation in Polyethylene Crystals Studies by
Microindentation hardness, Philosophical Magazine A, 1993, Vol. 68, P: 209-224.
D
[DAN94]: H. Danilkewich, Properties of Mechanically Processed Polymer- Metallic Alloys,
Theses in Department of Mechanical Engineering of the university of Calgary, Alberta, 1994,
145P.
[DAR93] : O. Darras and R. Seguela, Surface free energy of the Chain- Folding Crystal faces
of ethylene–butene random copolymers, Polymer, 1993, Vol. 34, P: 2946-2950.
[DEN85]: P. DENEUVILLE, Déformation Plastique et Cinétique de Cristallisation de
Polyoxyméthylène. Forgeage en Matrice Fermée à l'état solide, THÈSE à l'Ecole Nationale
Supérieure des Mines de Paris, 1985, 184P.
171
[DEN99]: Z. Denchev, A. Nogales, T.A. Ezquerra, J. Fernandes-Nascimento, F.J. BaltáCalleja, On the origin of the Multiple Melting Behaviors in Poly (ethylene naphthalene 2,6dicarboxylate): Microstructural Study as Revealed by Differential Scanning Calorimetry and
X-ray Scattering, Journal of Polymer Science: Part B: Polymer physics, 2001, Vol. 38, P:
1167-1182.
[DEN01]: Z. Denchev, A. Nogales, I. Sics, T.A. Ezquerra, F.J. Baltá-Calleja, Probing
Multiple Melting Behaviors in Poly(ethylene naphthalene 2,6-dicarboxylate) with Different
Thermal Histoiries by Simultaneous Wide-Angle and Small-Angle X-Ray Scattering, Journal
of Polymer Science: Part B: Polymer physics, 2001, Vol. 39, P: 881-894.
[DIM86]: A. Dimian, Influence de l’histoire thermomécanique sur la cristallisation du
polyoxyméthylène injecté, THÈSE au conservatoire National des Arts et métiers Paris, 1986,
209P.
[DUP**]: Notice technique des Producteur: résines et acétals Delrin, Genève : Du Pont de
Nemours, sans date.
[DZI01]: W. Dziadur, The effect of some elastomers on the structure and mechanical
properties of polyoxymethylene, Materials Characterization, 2001, Vol. 46, P:131-135.
F
[FER96]: L. Ferry, Relations Mise en Œuvre-Morphologie-Comportement sous Rayonnement
Ultraviolet de Forte Puissance de PTFE, THÈSE à l’INSA de Lyon, 1996, 198P.
[FRA03]: S.E. Franklin , A. Kraker, Investigation of counterface surface topography effects
on the wear and transfer behaviour of a POM–20% PTFE composite, Wear, 2003, Vol. 225,
P: 766-773.
[FUJ99]: M. Fujita, M. Tsuji, S. Kohjiya, A TEM Study on Polyoxymethylene edge-on
Lamellae Crystallized Epitaxially on Alkali Halides, Polymer, 1999, Vol. 40, P: 2829-2836
[FÜZ**]: S. Füzesséry, Polyacétals, polyoxyméthylène, POM, In Technique de l’Ingénieur,
Traité Plastique et composites, Vol. A3385. Paris : Technique de l’Ingénieur, 05/1991, P.
A385-2-A385-12.
G
[GEI63]: P.H. Geil Polymer Single Crystals, chap. 1,2, New-York : John Wiley & Sons,
1963, 495P.
[GEI00]: P.H. Geil, Some Overlooked Problems in Polymer Cristallization, Polymer, 2000,
Vol. 41, P: 8983-9001.
[GIB78]: A.G. Gibson and I.M. Ward, Hydrostatic Extrusion of Linear Polyethylene: Effect
of Molecular Weight and Product Diameter, 1978, Vol. 16, P: 2015-2030.
[GOS97]: J. Gossot, POM: Ces Matériaux ont atteint l’âge de la maturité, Caoutchoucs and
Plastiques, 1997, N0. 760, P: 33-36.
172
[GRA98]: T. Gradt, T. Schneider, W. Hübner and Börner, friction and Wear at low
Temperatures, Journal of Hydrogen Energy, 1998, Vol. 23, N0. 5, P: 397-403.
[GUY95] A. Guyot de OFTA, dans Matériaux Polymères Enjeux et Perspectives -chapitre-IIEvolutions dans les procédés de polymérisation, Masson, 1995, P:93-120.
H
[HAM00]: S. HAMBIR, J. P. JOG, Sintering of UHMWPE, Journal of Material Science,
2000, Vol. 23, N0. 3, P: 221-226.
[HAM03a]: Hama, Hisakatsu; Tashiro, Kohji, "Structural changes in non-isothermal
crystallization process of melt-cooled polyoxymethylene [II] evolution of lamellar stacking
structure derived from SAXS and WAXS data analysis, Polymer, 2003, Vol. 44, P: 21592168.
[HAM03b]: H. Hama, K. Tashiro, Structural changes in non- isothermal crystallization
process of melt-cooled Polyoxymethylene. [I] Detection of infrared bands characteristic of
folded and extended chain Crystal morphologies and extraction of a lamellar stacking model,
Polymer, 2003, Vol. 44, P: 3107-3116.
[HAM03c]: Hama, Hisakatsu; Tashiro, Kohji, "Structural changes in isothermal
crystallization process of polyoxymethylene investigated by time-resolved FTIR, SAXS and
WAXS measurements, Polymer, 2003, Vol. 44, P: 6973-6988.
[HAS96]: S. Hashemi et al, Mechanical Property Relationships in glass-filled
Polyoxymethylene, Journal of Materials Science, 1996, Vol. 31, P: 5017-5025.
[HIN03]: P.J. Hine, I.M. Ward, N.D. Jordan, R.H. Olley, D.C. Bassett, The hot compaction
behaviour of woven oriented polypropylene fibers and tapes. I. Mechanical properties,
Polymer, 2003, Vol. 44, P: 1117-1131.
[HOE**]: Notice technique des Producteur, polyacétals Hostaform, Hoechst, sans date.
[HOO00]: R. Hooper, C.W. Macosko, J.J. Derby, Assessing a Flow-Based finite element
Model for the Sintering of Viscoelastic Particles, Chemical Engineering Science, 2000, Vol.
55, P: 5733-5746.
[HU98]: X. Hu, Tribological Behaviour of Modified Polyacetal against MC Nylon Without
Lubrication, Tribology Letters, 1998, Vol. 5, P: 313-317.
[HUA93]: C.Y. Huang, W.Y. Chiang, Synergistic Effect of PTFE and Sodium Etched PTFE
on Polyacetal Ternary Blend, European Polymer journal, 1993, Vol. 29, P: 843-749.
[HU00]: X. Hu, Friction and Wear Behaviors of Toughened Polyoxymethylene Blend under
Water Lubrication, Polymer Plastics Technology, 2000, Vol. 39, P: 137-150.
[HUB01]: L. Hubert, Propriétés physiques et mécaniques du polyéthylène pour application
tube en relation avec l’architecture moléculaire, THÈSE à l’INSA de Lyon, 2001, 140P.
173
I
[ISH94]: T. Ishida, Mechanical Alloying of Polytetrafluoroethylene with Polyethylene,
Journal of Materials Science Letters, 1994, Vol. 13, P: 623-628.
J
[JAY76]: G.S. Jayaraman, J.F. Wallace, P.H. Geil, and E. Baer, Cold compaction molding
and Sintering of Polystyrene, Polymer Engineering and Science, 1976, Vol. 16, N0. 8, P: 529536.
[JOR02]: N.D. Jordan, R.H. Olley, D.C. Bassett, P.J. Hine, I.M. Ward, The Development of
Morphology during hot compaction of Tensylon High Modulus Polyethylene tapes and
woven cloths, Polymer, 2002, Vol. 43, P: 3397-3404.
[JOR03]: N.D. Jordan, D.C. Bassett, R.H. Olley, P.J. Hine, I.M. Ward, The hot compaction
behaviour of woven oriented polypropylene fibers and tapes. II. Morphology of cloths before
and after compaction, Polymer, 2003, Vol. 44, P: 1133-1143.
K
[KER60]: W. Kern and V. Jaacks, Some Kinetic Effects in Polymerization of 1,3,5-Trioxane,
Journal of Polymer Science, 1960, Vol. 58, P: 399-404.
[KOM91]: T. Komatsu et al, The Effect of Pressure on Drawing Polyoxymethylene: 3. Effects
of Voids on the Chemical Resistance of Polyoxymethylene draw fibres, Polymer, 1991, Vol.
32, P: 1994-1999.
[KON02]: Y. Kong, J.N. Hay, The Measurement of The crystallinity By DSC, Polymer, 2002,
Vol. 43, P: 3873-3878.
[KUK95]: S.N. Kukureka et al, The Wear Mechanisms of Acetal in Unlubricated RollingSliding Contact, Wear, 1995, Vol. 185, P: 1-8.
L
[LAB99]: T. Labour, Microstructure et Comportement Mécanique du Polypropylène Chargé,
THÈSE à l’INSA de Lyon, 1999, 239P.
[LAM02]: O. Lame, Etude Expérimentale in Situ de la Déformation en Cours de Frittage de
Poudre Métalliques Compactées et Formulation d'une Loi de Comportement dans la cadre de
la Thermodynamique Hors Equilibre, THÈSE à PMM de Institut National Polytechnique de
Grenoble, 2002, 185P.
174
[LAN99]: A.E. Langroudi, Etude de la déformation viscoélastique et plastique du PET
amorphe et semi-cristallin autour de la transition vitreuse, THÈSE à l’INSA de Lyon, 1999,
202P.
[LIN97]: E. Linard, Propriétés physiques et mécaniques du polyoxyméthylène, Rapport de
Stage DEA au GEMPPM-INSA de Lyon, 1997, 46P.
[LIN98]: Z. Linxi, X. Agen, Z. Delu, Dynamic and Static Properties of Polyoxymethylene
Chains, European Polymer Journal, 1999, Vol. 35, P: 1991-1917.
M
[MAJ64]: V.J. Majer and O. Hainová, Bestimmung des Kristallinitätsgrades von
Polyoxymethylen und von einem Mischopolymeren Trioxan-zylisvher Äther durch
ultrarotspektroskopie, Kolloid-Zeitschrift und Zeitschrift für Polymere, 1964, Vol. 201, P: 2326.
[MIC00]: W. Michaeli, M. Glibmann, Investigation and Measurement of the True
Stress/Strain Behaviour of Semicrystalline Thermoplastics, Macromolecular Materials and
Engineering, 2000, Vol. 284/285, P: 19-24.
[MAR96]: C. Marega et al, Small-Angle X-ray Scattering from High Density Polyethylene:
Lamellar Thickness distributions, Polymer, 1996, Vol. 37, P: 5549-5557.
[MAT97]: K. Matsuzaki et al, Morphospecific Polymer from Copolymerization of Trioxane
and Ethylene Oxide, Journal of Polymer Science: Part A: Polymer Chemistry, 1997, Vol. 35,
P: 2479-2486.
[MOR99]: S.S. Morye, P.J. Hine, R.A. Duckett, D.J. Carr, I.M. Ward, A compraison of the
properties of hot compacted gel-spun polyethylene fibre composites, composites: Part A,
1999, Vol.30, P: 649-660.
[MOR01]: J. Morawiec, Z. Bartczak, T. Kazmierczak, A. Galeski, Rolling of Polymeric
Materials with Side Constraints, Materials Science and Engineering, 2001, Vol. A317, P: 2127.
[MAS00]: J. Masamoto et al, Microphase Separation in Polyoxymethylene End-Capped With
a Long-Chain Alkyl, Polymer, 2000, Vol. 41, P: 7283-7287.
[MÜC99]: K.F. Mück, in Polymer Handbook Fourth Edition, J. Brandrup, E.H. Immergut and
E.A. Grulk Eds, John Wiley & Sons, New-York, 1999, Part V, P: 97-113.
N
[NAR95]: M. Narkis, Polymer Powder Technology, chap. 10M. Narkis, New-York : John
Wiley & Sons, 1995, 460P.
O
175
[ODI91]: S. Odi-Owei, D.J. Schipper, Tribological Behaviour of Unfilled and Composite
Polyoxymethylene, Wear, 1991, Vol. 148, P: 363-376.
[OUD94]: C. Oudet, Polymères: Structures et Properties-introduction, Paris : Masson, 1994,
249P.
[ÖNE93]: M. Öner and D.H. White, Investigation of the Degradation of Commercial
polyoxymethylene Copolymer in Water Service Application, Polymer Degradation and
Stability, 1993, Vol. 40, P: 297-303.
P
[PAN95]: J. Pan, Mechanically Alloyed Polymers, Theses in Department of Mechanical
Engineering of the university of Calgary, 1995, 220P.
[PIS97]: C. Pistor, K. Friedrich, Scratch and Indentation Test on Polyoxymethylene (POM ),
Journal of Applied Polymer and Science, 1997, Vol. 66, P: 1985-1996.
R
[RAS03]: S. Rastogi, L. kurelec, J. Cuijpers, D. Lippits, M. Wummer, P.J. Lemstra,
Disentangles State in Polymer melts; a route to Ultimate physical and Mechanical Properties,
Macromol Materials Engineering, 2003, Vol. 288, P: 964-971.
[RAT03a]: S. Ratner, A. Weinberg, G. Marom, Neat UHMWPE filament wound composites
by crosslinking compaction, Advanced Composites Letters, 2003, Vol. 12, P: 197-202.
[RAT03b]: S. Ratner, A. Weinberg, G. Marom, Morphology and Mechanical Properties of
Crosslinked PE/PE Composite Materials, Polymer Composites, 2003, Vol. 24, P: 422-427.
[REI89]: J. J. Reilly, Characterization and Cold Compaction of Polyether- etherketone
Powders, Polymer Engineering and Science, 1989, Vol. 29, P: 1456-1465.
[GFP90]: GFP, Initiation à la Chimie et à la Physico-Chimie Macromoléculaires. Structure
des Polymères et méthodes d'Etude, Volume 8, Strasbourg : GFP, 1990, 580P.
[RUL77]: W. Ruland, The Evaluation of Small-Angle Scattering of Lamellar Two-Phase
Systems by Means of Interface Distribution Functions, Colloid and Polymer Science, 1977,
Vol. 255, P: 417-427.
S
[SCH74]: J. Schultz, Polymer Materials Science, Mechanical Behavior of Semicrystalline
Polymers, chap. 2,11, New-Jersey : Prentice-Hall, INC, 1974, 513P.
176
[ŚLU04]: C. Ślusarczyk, Time- Resolved SAXS Investigations of Morphological Changes in
a Blend of Linear and Branched Polyethylenes During Cristallization and Subsequent
Melting, Journal of Alloys and Compounds, 2004, Vil. 382, P: 68–74.
T
[TAD73]: H. Tadokoro, Structure of Cristalline Polymers, New York : Wiley interscience
Publication, 1973, 465P.
[TAK78]: T. Takahashi and H. Okazaki, Epitaxial Crystallization of Polyoxymethylene
During Cationic Polymerization of Trioxane, Journal of Polymer Science: Polymer Physics
Edition, Vol. 16, P: 2049-2056.
[TAK79]: Y. Takahashi and H. Tadokoro, Least-Squares Refinement of Molecular of
Polyoxymethylene, Journal of Polymer Science: Polymer Physics Edition, Vol. 17, P: 123130.
[TAR78]: P.M. Tarin and S.L. Thomas, An Electron Microscopy Study of the Microfibrillar
Structure of Deformed Polyethylene Spherulites, Polymer Engineering and Science, 1978,
Vol. 18, N0. 6, P: 472-476.
[TAS01]: K. Tashiro, Molecular Dynamics Calculation to Clarify the Relationship between
Structure and Mechanical Properties of Polymer Crystal: The Case of Orthorhombic
Polyethylene, Computational and Theoretical Polymer Science, 2001, Vol. 11, P: 357-374.
[THO01]: M.S. Thompson, M.D. Northmore-Ball, K.E Tanner, Tensile Mechanical
Properties of Polyacetale after one and six months Immersion in Ringer’s Solution, Journal of
Materiales Science: Materials in Medicine, 2001, Vol.12, P:883-887.
[TOP63]: A. Tobolsky et al, Rheology of Polyoxymethylene, Journal of Polymer Science:
Part A, 1963, Vol. 1, P: 483-489.
[TRU80]: R.W. Truss, K.S. Han, J.F. Wallace and P.H. Geil, Cold compaction molding and
Sintering of Ultra High Molecular Weight Polyethylene, Polymer Engineering and Science,
1980, Vol. 20, N0 . 11, P: 747-755.
U
[UNA03]: H. Unal , A. Mimaroglu, Friction and wear behaviour of unfilled engineering
thermoplastics, Materials and Design, 2003, Vol. 24, P: 183–187.
V
[VER96]: R.K. Verma et al, SAXS Studies of Lamellar Level Morphological Changes
During Crystallization and Melting in PEEK, Polymer, 1996, Vol. 39, P: 5357-5365.
[VIG92]: G. Vigier, J. Tatibouet, A. Benatmane, R. Vassoille, Amorphous phase evolution
during cristallization, Colloidal Polymer Science, 1992, Vol. 270, P: 1182-1187.
177
[VON67]: C. G. Vonk and G. Kortleve, X-Ray Small-Angle Scattering of BulK Polyethylene,
II. Analyses of the Scattering Curve, Kolloid-Z, 1967, Vol. 220, P: 19-24.
W
[WAN98]: F. Wang, S. Saeki and T. Yamaguchi, Investigation of Melting Phenomenon and
Thermodynamic Behaviour in Crystalline Polymers, Polymer, 1998, Vol. 39, P: 2235-2239.
[WAR71]: I.M. Ward, Mechanical Properties of Solide Polymer: Relaxation Transitions and
Relationship to Molecular Structure, chap:8, New-York : John Wiley and Sons, 1971, 473P.
[WAR04]: I.M. Ward and P.J. Hine, The science and technology of hot compaction, Polymer,
2004, Vol.45, P: 1413-1427.
[WUN73]: B. Wunderlich, Macromolecular Physics, Vol. 1, New-York: Academic Press,
1973, 549P.
[WUN76]: B. Wunderlich, Macromolecular Physics, Vol. 2, New-York: Academic Press,
1973, 365P.
[WUN80]: B. Wunderlich, Macromolecular Physics, Vol. 3, New-York: Academic Press,
1980, 250P.
X
[XU01]: W. Xu, P. He, Isothermal Crystallization Behavior of Polyoxymethylene With and
Without Nucleating Agents, Journal of Applied Polymer Science, 2001, Vol. 80, P: 304-310.
Y
[YAN97]: R.J. Yan, P.J. Hine, I.M. Ward, R.H. Olley, D.C. Bassett, The Hot compaction of
Spectra gel-spun Polyethylene fibre, Journal of Materials Science, 1997, Vol. 32, P: 48214831.
Z
[ZAH98]: R.R. Zahran, Effect of γ-Irradiation on the Ultrasonic and Structural Properties of
Polyoxymethylene, Materials Letters, 1998, Vol. 37, P: 83-89.
[ZHO97]: H. Zhou and G.L. Wilkes, Comparison of Lamellar Thickness and its Distribution
determination from DSC, SAXS, TEM and AFM for High Density Polyethylene Films
Having a Stacked Lamellar Morphology, Polymer, 1997, Vol. 38, P: 5735-5747.
178