TEST REPORT Tajfun RCA 400 Joy
Transcription
TEST REPORT Tajfun RCA 400 Joy
TEST REPORT Tajfun RCA 400 Joy Test number 5373 OWNER OF TEST CERTIFICATE: Applicant and distributor: Tajfun Planina Proizvodnja strojev d.o.o. Planina 41a 3225 Planina pri Sevnici www.tajfun.com Tajfun RCA 400 Joy Test results and evaluations Manufacturer: Tajfun Planina Proizvodnja strojev d.o.o Planina 41a; 3225 Planina pri Sevnici Automatic log splitter RCA 400 Joy Three point attachment; powered by tractor PTO-shaft Hydraulic adjustment of splitting wedge height Hydraulically operated saw unit and clamp Hydraulic in-feed and discharge conveyor belt Separate, hydraulically controlled feed unit (not tested, only dimensions and weight) Test item Evaluation Test result Application field Automatic log saw and splitter with a nominal splitting force of 150 kN (≈15.3 t) at nominal engine speed n.e. nZ = 400 - 430 min-1; for semi professional use Splitting capacity per hour ≈ 6 m3 (fresh beech) Saw capacity (fresh beech) log Ø 15 cm ≈ 120 cm²/s 1 1 + log Ø 24 cm ≈ 210 cm²/s 1 + manual blade stroke speed control therefore some discrepancies possible. Manufacturer's declaration Measured Splitting force 150 kN (≈15.3 t) 141 (≈14.4 t) Clamp force 200 N (≈ 20 kg) Forces at nominal engine speed nZ o o Maximum speeds at nominal engine speed nZ Splitting cylinder piston work direction 31 cm/s return 53 cm/s + Conveyor belts In-feed 67 cm/s discharge 110 cm/s + Saw chain idling 26 m/s under load 22 m/s + Hydraulic pressure at nominal engine speed nZ Manufacturer's declaration-25 MPa (250 bar) Measured 17.5 MPa (175 bar) + Noise Work cycle 90 2 dB (A) Sawing 93 dB(A) 2 average of feeding / sawing / splitting / discharge 1/3 o Tajfun RCA 400 Joy Test item Test result Evaluation Operation/ handling Assembly and disassembly Quick assembly; once attached to the tractor, the machine only requires a few adjustments before it is ready for use o Control elements Operating station equipped with joy-stick for controlling frequently required functions; control elements easy to reach + Wood discharge Discharge conveyor belt can be hydraulically extended before work commences + Manual vertical adjustment, no horizontal adjustment, o Effective wood discharge achieved by well-dimensioned carriers + Wood in-feed Must be folded-out manually before work begins No vertical adjustment, good profile Sawing Splitting o good cutting capacity, controlled by central joy-stick + Saw switches off after cutting process has been completed + Splitting procedure can be initiated by joystick after sawing or during wood loading + Capable of splitting logs between 100 – 400 mm in diameter o Splitting wedge height can be hydraulically adjusted by 110 mm o All details concerning wood transport, sawing and splitting apply to straight logs. Crooked logs are principally more difficult to process. Maintenance Saw unit Tools required for removing saw chains and guides; protective panels are easy to disassemble and provide good access Tightening the chain is somewhat impeded due to placement of screw immediately next to cutting unit + o Hydraulic controls and hoses Mostly protected by covers, tools required for removal, compact but still easy to access o Oil filter / hydraulic tank Chain-oil tank is easy to access; oil filter and hydraulic oil tank are easy to access and requires loosening a few fine thread bolts o Lubrication points Good accessibility o Operational safety No problems during test o Operator manual Clear and well illustrated clear spare parts list provided o Work safety GS- Test (PZ.LSV) Test certificate No. LSV-GS-2010/132 Evaluation range: ++ / + / o / - / -- / (o = Standard / n.e. = not evaluated, within limits) 2/3 n.e. Tajfun RCA 400 Joy Description and technical data Weight Measurements machine L/H/W [mm] 3 Conveyor belts [mm] Length Width / incl. guides Height Heightunderclearance Heightdischarge Machine weight 1010 kg Weight feed unit 150 kg Transport position 2450 / 2300 / 1400 Work position 5750 / 1600/2560 3 / 1560 Height with feed conveyor inclined at 35° In-feed conveyor belt Discharge conveyor belt 2100 mm 4150 mm 200 /300 mm 430 / 500 mm 900 mm 300 – 2360 mm 300 – 2560 mm Hydraulic ram [mm] Octagonal base lram 560 / lsplitting 570; b 280; h 300 Roller deck [mm] l 1750; b 800; h 900 fixed height Footstep L/H/W [mm] Guide: Oregon Pro Lite SL; Chain Oregon Multicut Saw unit Pump Parker PGP/PGM511 (sawing/splitting 4.3/19 ccm/rev) maximum pump capacity 55 l/min maximum approved pressure sawing / splitting 275 /230 bar Transmission GB M52P gear ratio 1 : 5.5 Hydraulic filter Sofima; RFM 25 FD Used hydraulic oil Various brands Biodegradable hydr. oil Non approved by manufacturer Tank capacity Hydraulic oil 100 l / chain oil 8l / transmission oil 1.2l Field tests: Carried out by experts from forestry and agriculture October 2010 Kuratorium für Waldarbeit und Forsttechnik e.V. Author Spremberger Strasse 1; 64823 Gross-Umstadt Patrick Müßig Tel 06078-785-0; Fax: 06078/785-50 [email protected] www.kwf-online.de 3/3