Pressure transducer

Pressure transducer
Type P 153 R
.Relative pressure from 0-2 bars to 0-700 bars
.All parts stainless steel
.2 conductor cable 4-20mA
The P 153 series pressure sensor are manufactured out of stainless steel and
include an micro electronic device to supply 4 to 20 mA on a 2 conductor cable
Technical specification
Sensitivity creep on compensated range
%/°C
± 0.02
Zero creep on compensated range
%Em/°C
± 0.01
Hysteresis deviation
%EM
± 0.1
Linearity deviation
%EM
0.3 ( from 2 to 10 bars ) ± 0.15 > 10 bars
Capacity
bars
2, 5, 10, 25, 50, 100, 250, 350, 500, 700
Load resistance
Ohm
Up to 1 200 Rc in KOhm = (Vexcit - 12V)/20 mA
Influence of the excitation voltage on the output
0.03
Inversion of polarity
Protection included
Material
Stainless steel
Hydraulic installation
1/4 gaz female
Adjustment of zero and scale
On the sensor
Adjustment range ± 10% mesuremenr range
Output signal
Vdc
2 conductors 4-20 mA
Safe overload
%EM
150
Operating temperature
°C
- 10 to + 80 (50°F to 180°F)
Excitation voltage
V
9 to 32 not regulated
Options
Out of catalog standard range
Male hydraulic connector fitted
male hydraulic connector welded
Wiring
4 conductor braided cable, length 1 meter
(Other length upon request)
or 4 pin miniature connector
Version câble
Rouge
+ Alimentation
Jaune
+ Mesure
Version prise
1
2
TECHNIQUES MODERNES D'EXTENSOMETRIE
Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9
Tel. 04.94.10.00.51 - Fax 04.94.10.00.52
Specifications are subject to change without notice
Page 1
Outside dimensions
TECHNIQUES MODERNES D'EXTENSOMETRIE
Parc d'activités de Signes - B.P. 734 - 83030 TOULON Cedex 9
Tel. 04.94.10.00.51 - Fax 04.94.10.00.52
Specifications are subject to change without notice
Page 2