SIMATIC Product Information S7-modular Embedded Controller (S7
Transcription
SIMATIC Product Information S7-modular Embedded Controller (S7
s SIMATIC Product Information ______________________________________________________________________________________________________________________________ S7-modular Embedded Controller (S7-mEC) EC31 01/2009 6ES7677-1DD00-0BA0 ______________________________________________________________________________________________________________________________ Diese Produktinformation enthält wichtige Informationen zu EC31. Die Produktinformation ist Bestandteil des gelieferten Produkts und die darin enthaltenen Aussagen sind in Zweifelsfällen in der Verbindlichkeit anderen Aussagen übergeordnet. This Product Information contains important information on EC31. The Product Information is part of the product supplied and the information in it should be considered more up-to-date if uncertainties arise. Cette information produit contient des informations importantes sur EC31. Elle fait partie du produit livré et, en cas de doute, les indications qu’elle contient sont prépondérantes par rapport à celles contenues dans d’autres documents. Copyright © Siemens AG 2009 Siemens Aktiengesellschaft A5E01716489-05 Lieferumfang Bestellnummer: 6ES7677-1DD00-0BA0 Der Lieferumfang des Paketes EC31 umfasst: • Embedded Controller EC31, Hardware Erzeugnisstand 03 mit Windows XP Embedded SP2 Feature Pack 2007 (vorinstalliert) • Restore-DVD "SIMATIC S7-mEC EC31 01/2009" • DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" (mit SDK) • Produktinformation • Windows Certificate of Authenticity (CoA) mit CoA Aufkleber • End User License Agreement (EULA) Terms for Windows XP Embedded Dokumentation Informationen zum System S7-mEC finden Sie auf der DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" unter \S7-mEC_documents (Dokumentation im PDF-und CHM-Format) Die Betriebsanleitung s7-mec_ec31rtx_operation_de-DE enthält Informationen zum Hardwareaufbau und zur Inbetriebnahme. Das Programmierhandbuch s7-mec_sdk_programming_de-DE enthält Informationen zum Programmieren einer Applikation für EC31 mit zentraler Peripherie. Programmbeispiel Im Lieferumfang des EC31 ist ein komplettes Anwenderprogramm enthalten, das alle Funktionen des SDK beispielhaft für einen S7-mEC-Aufbau mit einer Digitaleingabebaugruppe und einer Analogausgabebaugruppe aufruft. Den Quellcode finden Sie vorinstalliert auf dem EC31 und auf der DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation ". Auf dem EC31 können Sie den Projektordner des Programmbeispiels (erstellt mit Visual Studio 2005) mit folgendem Befehl aus der Windows-Taskleiste öffnen: Start > All Programs > SIMATIC > S7-mEC > EC31 > SDK Software >ecExample Hinweise zum Betrieb VORSICHT Beim Einsatz einer SIMATIC Micro Memory Card im Embedded Controller wird die S7-Formatierung überschrieben. Danach ist die SIMATIC Micro Memory Card nicht mehr in SIMATIC-S7-Baugruppen einsetzbar! Hinweise zum Programmieren Sichere Rückwandbus Konfiguration In der Betriebsart "Sichere Rückwandbus Konfiguration" stellt das System sicher, dass alle Ausgänge auf die inaktiven bzw. auf die Ersatzwerte schalten, wenn der RUN/STOP-Schalter auf STOP gestellt wird. Sie haben trotzdem die Möglichkeit in dieser Schalterstellung die Ausgänge zu aktivieren, indem Sie mit der Funktion eccio_output_control die Ausgänge erneut aktivieren. Somit ist es möglich, auch in der Schalterstellung STOP andere Werte auszugeben. Beachten Sie, dass die Funktionalität des RUN/STOP-Schalters hier von anderen S7-300 CPU abweicht! 2 A5E01716489-05 Scope of delivery Order number: 6ES7677-1DD00-0BA0 The scope of delivery for the EC31 package includes: • Embedded Controller EC31, product version 03 with Windows XP Embedded SP2 Feature Pack 2007 (preinstalled) • DVD Restore "SIMATIC S7-mEC EC31-HMI/RTX 01/2009" • DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" (including SDK) • Product Information • Windows Certificate of Authenticity (CoA) with CoA adhesive label • End User License Agreement (EULA) Terms for Windows XP Embedded Documentation Information on the S7-mEC system is available on the DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" under \S7-mEC_documents (documentation in PDF and CHM format) The operating instructions s7-mec_ec31rtx_operation_en-US provide information on hardware structure and commissioning. The programming manual s7-mec_sdk_programming_en-US includes information on programming of an application for EC31 with centralized I/O devices. Sample program The scope of delivery of the EC31 includes a complete user program that calls up all functions of the SDK as an example for an S7-mEC system with a digital input module and an analog output module. The source code has been preinstalled on the EC31 and is available on the DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation." You open the project folder of the sample program on the EC31 (programmed in Visual Studio 2005) with the following command from the Windows task bar: Start > All Programs > SIMATIC > S7-mEC > EC31 > SDK Software > ecExample Notes on operation CAUTION The S7 format of any SIMATIC Micro Memory Card used in the Embedded Controller will be overwritten. This prevents any further use of the SIMATIC Micro Memory Card in SIMATIC-S7 modules! Notes on programming Safe backplane bus configuration In the "Safe backplane bus configuration" operating mode, the system ensures that all outputs are set to the inactive or substitute values when the RUN/STOP switch is set to STOP. You still have the option to enable the outputs in this switch position by using the eccio_output_control function to enable the outputs once again. This means you are able to output other values even in the STOP switch setting. Note that the RUN/STOP switch differs in function from other S7-300 CPUs! A5E01716489-05 3 Livraison Numéro de référence : 6ES7677-1DD00-0BA0 La livraison du paquet EC31 comprend : • Embedded Controller EC31, hardware version 03 avec Windows XP Embedded SP2 Feature Pack 2007 (préinstallé) • Restore-DVD "SIMATIC S7-mEC EC31 01/2009" • DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" (avec SDK) • Information produit • Certificat d'authenticité Windows (CoA) avec étiquette CoA • Contrat de licence utilisateur final (CLUF) Terms for Windows XP Embedded Documentation Vous trouverez des informations sur le système S7-mEC sur le DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation" sous \S7-mEC_documents (Documentation au format PDF et CHM) Les instructions de service s7-mec_ec31rtx_operation_fr-FR contiennent des informations pour le montage matériel et la mise en service. Le manuel de programmation s7-mec_sdk_programming_fr-FR contient des informations sur la programmation d’une application pour EC31 avec périphérie décentralisée. Exemple de programme La livraison de l’EC31 comprend un programme utilisateur complet qui appelle toutes les fonctions du SDK à l’aide d’exemples pour un montage du S7-mEC avec un module d’entrées TOR et un module de sorties analogique. Vous trouverez le code source préinstallé sur l’EC31 et le DVD "S7-mEC EC31, EC31-RTX, EC31-HMI/RTX Software and Documentation". Vous pouvez ouvrir dans l’EC31 le dossier de projet de l’exemple de programme (programmé avec Visual Studio 2005) à l’aide de la commande suivante de la barre des tâches Windows : Démarrer > Tous les programmes > SIMATIC > S7-mEC > EC31 > SDK Software > ecExample Remarques sur l'utilisation PRUDENCE Le formatage S7 est écrasé en cas d'utilisation d'une micro-carte mémoire SIMATIC dans le contrôleur embarqué. La micro-carte mémoire SIMATIC n'est alors plus utilisable dans les modules SIMATIC S7 ! Remarques sur la programmation Configuration sécurisée du bus de fond de panier Dans le mode, "Configuration sécurisée du bus de fond de panier", le système vérifie que toutes les sorties soient commutées aux valeurs inactives ou de remplacement si le commutateur RUN/STOP est mis sur STOP. Vous avez cependant la possibilité d’activer les sorties dans cette position du commutateur en activant de nouveau les sorties à l’aide de la fonction eccio_output_control. Ainsi, il est possible de délivrer d’autres valeurs également en position de commutateur STOP. Tenez compte du fait que la fonctionnalité du commutateur RUN/STOP diffère ici des autres CPU S7-300 ! 4 A5E01716489-05