BPL Turbo C3 15W40

Premium Extra high performance diesel engine oil
Turbo C3 15W40 CH4 are high performance, dedicated heavy duty engine lubricants
designed for use in modern high speed turbocharged diesel engines. They use exclusive additive
formulations in conjunction with highly refined base oils to deliver longer life and enhanced protection
relative to their predecessors.
Turbo C3 15W40 CH4 Oil has been formulated for severe duty service in engines specifically designed to
meet Euro 3 on-highway exhaust emission standards as well as being suitable for a wide range of heavy
duty off-highway applications.
APPLICATIONS
On-Highway Heavy Duty Trucks As an integral part of the development of Turbo C3 15W40 CH4,
extensive testing of the product has been carried out in road haulage operations around the world
confirming the performance of Turbo C3 15W40 CH4 in European, American and Japanese equipment
under a wide range of haulage conditions.
Construction and Mining Turbo C3 15W40 CH4 is recommended for most engine types found in
construction and mining equipment. It is particularly suitable for Caterpillar, Cummins, Detroit Diesel (4cycle) and Komatsu engines. It is formulated to provide continuous protection even where higher sulphur
fuels are used.
Agricultural Equipment Turbo C3 15W40 CH4 is ideally suited for the stop-start service found in
agricultural operation and protects against bearing wear and deposit formation even under high load low
speed conditions when other
oils can fail.
PRODUCT FEATURES AND BENEFITS
Thermal stability and resistance to oxidation
High detergency/low dispersancy
Excellent engine cleanliness
Rapid neutralization of acidic combustion products
increased resistance to thermal breakdown ensuring continued protection throughout the drain
interval, even under the most severe conditions.
Complete protection against wear rust and corrosion
High dispersant characteristics
Excellent viscometrics in use
Greater Protection at Higher Temperatures
Longer Oil Life
SPECIFICATIONS AND APPROVALS
API CH-4/CG-4/ CF-4/CF1,2
ACEA E3, E5 2
Cummins CES 200-711,2,-721,2 -761, Cummins (B&C Series) CES 200-751,2
Mack EO-M1,2, EOM Plus1
Detroit Diesel/MTU Type II (Series 2000& 4000)
MAN 32752, Mercedes Benz 228.32, RVI RD, Volvo VDS-2
GM Allison C-4 (meets the requirements)1, Caterpillar ECF-1
TYPICAL CHARACTERISTICS
Property (Test)
Value
Appearance
Clear & Bright
Flash Point (COC) 0C
240
Kinematic Viscosity at 1000C (cSt)
14.5
Viscosity Index
120
TBN (mg KOH/g)
10
Pour Point 0C
-18 max
These characteristics are typical of current production. Whilst future production will conform to BP Lubricants ltd
specification, variations in these characteristics may occur.
Precautions
BPL Engine Oils are unlikely to present any significant health or safety hazard when properly used in the
recommended application, and good standards of industrial and personal hygiene are maintained.
This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment.
Health & Safety
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with
soap and water. For further guidance on Product Health & Safety refer to the appropriate Beyond
Petroleum Lubricants Product / Materials Safety Data Sheet. MSDS' are available upon request through
your sales contact office, or via the Internet.
Protect the environment
Take used oil to an authorized collection point.
Do not discharge into drains, soil or water.
Manufactured by:
Address:
Telephone:
Email:
Web:
Beyond Petroleum Lubricants Limited
3rd Floor Alh. Adenekan Plaza, 1 Alh. Adenekan Street, Okota,
Lagos Nigeria.
234 01 8446123
[email protected]
www. bplubricantsltd.com
Due to continual product research and development, the information contained herein is subject to changes without notification.
Additional important health and safety information on this product can be found in the Material Safety Data Sheet, which is
available online at www.bplubricantsltd.com or by contacting Lubricants and Specialties, Technical Services, Help Desk: 234
8036404081
© 2012 Beyond Petroleum Lubricants ltd